FARO Technologies - Q3 2022

Transcript

Speaker 0

Good day, everyone, and welcome to the FARO Technologies Third Quarter 2022 Earnings Call. For opening remarks and introductions, I will now turn the call over to Michael Sonari at Sapphire Investor Relations. Please go ahead.

Speaker 1

Thank you, and good afternoon. With me today from Ferro are Michael Berger, Chief Executive Officer and Alan Miovitch, Chief Financial Officer. Today, after market close, the company released its financial results for the Q3 of 2022. The related press release and Form 10 Q are available FARO's website at www.ferro.com. Please note, certain statements in this conference call, which are not historical facts, may be considered forward looking statements that involve risks and uncertainties, some of which are beyond our control and include statements regarding future business results, Various factors could cause actual results to differ materially.

For a more detailed description of these and other risks and uncertainties, Please refer to today's press release and our annual and quarterly OCC filings. Forward looking statements reflect our views only as of today and except as required by law, we undertake no obligation to update or revise them. During today's conference call, Management will discuss certain financial measures that are not presented in accordance with U. S. Generally Accepted Accounting Principles or non GAAP financial measures.

In the press release, you will find additional disclosures regarding these non GAAP measures, including reconciliations to comparable GAAP measures. While not recognized in our GAAP, management believes these non GAAP financial measures provide investors relevant period to period comparisons of core operations. However, they should not be considered in isolation or as a substitute for a measure of financial performance prepared in accordance with GAAP. Now, I'd like to turn the call over to Michael Berger.

Speaker 2

Thank you, Mike. Welcome to our call. 3rd quarter demand across our certain markets remained healthy with revenues of $85,300,000 up approximately 8% year on year. On a constant currency basis, revenue for the quarter was $91,500,000 up 14% year on year and 9% sequentially, as continued strengthening of the U. S.

Dollar adversely impacted our reported revenues. I'm pleased to report that close to 70% of our hardware revenue is now derived from products launched within the last 2 years, compared to approximately 40% in the same time in 2021. This improved hardware vitality index It's a strong endorsement of our customer driven product. The cadence of new product introductions continued with the announcement of 2 new hardware products, The Vantage Max Laser Tracker and the Focus Core Scanner. Our Vantage Laser Tracker product line historically offered The probe providing 6 degrees of freedom has greatly simplified the measurement of complex parts.

Our newly released tracker has Double the probing accuracy of the prior model, dramatically increasing the value offered to our 3 d metrology customer base. The entry level Focus Core Laser Scanner expands the range of potential scanning applications by setting a new price performance watermark that is geared toward key markets including construction, building operations and public safety. In addition to our internally developed products, in September, we announced the acquisition of Geoslamp, whose business will accelerate our access to both the geospatial and mining markets, primarily through an indirect channel. We expect this channel will ultimately enable meaningful cross selling opportunities for FARO Products. Additionally, Their flexible, lower cost handheld mobile mapping device, which leverages proprietary simultaneous localization and mapping algorithms closes the gap we have in our mobile mapping portfolio, which is required by both the AECO and Public Safety market segments.

We do not expect meaningful cannibalization of our current scanning hardware products with the addition of the GEOS Lam portfolio. In Q3, we augmented our HaloBuilder product line with VideoWalk, which utilizes the 360 DIGREE camera video mode to simultaneously capture while walking. Video walk is significant in that it greatly simplifies And dramatically speeds up the capture project in construction progress management workflow. This feature

Speaker 3

is currently in customer beta.

Speaker 2

FARO now offers the broadest set of 3 d capture devices and technologies in the market, which allow us to uniquely satisfy customer requirements across the continuum of workflows. These capture technologies compete based on their ease of use, speed to data and accuracy. This is important as the data generated via these multiple capture technologies provide the foundation for our 3-dimensional digital reality based SaaS offering, which incorporates time as the 4th dimension. Earlier this year, we launched FerroSphere, our new 4 dimensional digital reality platform. Sphere provides a central location for users to Store, view, share and analyze reality capture data, allowing construction and operation professionals to benefit from faster site updates, Virtual collaboration and real time feedback.

As we look to our investment roadmap, We are focused on expanding the Sphere environment with SaaS applications that unlock the value of the 3 d data captured via Ferro's best in class capture technologies. An example of such an application is Flatness Check. Flatness, which was launched in Q3 is FARO's augmented reality application aimed at the concrete industry. With flatness check, concrete finishers can quickly and easily identify out of spec areas that can be fixed prior to concrete pour hardening. In this environment, time and the accuracy of information is of the essence.

This application will eliminate expensive post Q rework that is typical in commercial construction. In addition, contractors can now easily validate the flatness specification, which can streamline the payment process, Provide documentation of the work performed, while removing potential ambiguity that may exist in the finishing process. Flatness check, which is embedded into the FerroSphere ecosystem is the first of its kind and marks the beginning of what will be our rollout of additional applications Targeted at eliminating waste, simplifying management and improving the profitability of construction projects and facility management initiatives. Finally, in the Q3, we announced our Sphere 4 d Viewer, which leverages a combination of high end visual technology, Smart navigation, photogrammetry and artificial intelligence to provide users with a comprehensive Virtual visual representation of reality over time. This capability eliminates the reality data capture silos and enables a faster and more complete analysis of the data captured in a virtual reality environment by authorized Sphere users.

We continue to believe there is a large and growing untapped market for FARO's technology that leverages our Broad set of industrial leading capture solutions. The market potential for digitizing the physical world is enormous and our ability to acquire the best three Dimensional representation of the physical world and to share insights gained from this view across a digitally connected world is the key differentiator for FARO. As a result, over the long term, as we execute our strategy in addition To growing hardware revenue, we expect to realize new recurring software as a service revenue streams that will be accretive to our corporate gross margins, while increasing the competitive barriers to entry across our entire portfolio, which in turn will make us stickier with our current and future customer base. To physically demonstrate our 4 d Digital reality vision and our efforts to transform construction workflows, We are excited to announce that we will be hosting an Analyst Day in March of 2023 in New York City. More details will follow in the coming months.

I'll now turn the call over to Alan to provide an overview of our Q3 financial results.

Speaker 4

Thank you, Michael, and good afternoon, everyone. 3rd quarter revenue of $85,300,000 was up approximately 8% compared with the Q3 of 2021. With roughly 60% of our revenue impacted by U. S. Dollar FX rates, Our 3rd quarter revenue on a constant currency basis was $91,500,000 up 14% year on year.

Driving this result was primarily the increase in demand for both our Focus Premium Scanner and Quantum Max Scan Arm, particularly in the Americas where year to date revenue was up 10% compared to last year. On an actual currency When compared to last year, 3rd quarter hardware revenue of $54,900,000 was up 17% and is a strong leading indicator of the reaction customers are having to our updated product offerings. Software revenue of $10,600,000 was down 4% and service revenue of $19,800,000 was down 7%. Recurring revenue of $16,600,000 was up 2% when compared to Q3 of 2021. As we discussed last quarter and in addition to the effect of the strengthening U.

S. Dollar, We have begun to see a modest flattening of overall software revenue as we convert customer purchases of previously perpetual licenses to subscriptions. On service revenue, the lower hardware unit volume in 2020 2021 compared to prior years have reduced the installed base of products eligible for our service offerings, which when combined with the meaningful product quality enhancements we've made over the last 18 months, while improving our customer experience, has resulted in continued lower service revenue. GAAP gross margin was 50 point 7% and non GAAP gross margin was 51% for the Q3 of 2022. Our global footprint for both customer revenue and internal operating expenses results in a relatively effective natural hedge that has limited the overall year to date profitability of the recent and unprecedented FX changes.

That said, continued strengthening of U. S. Dollar exchange rates have adversely impacted reported gross margins by over 300 basis points when compared to the success model we set in early 2020. And while favorable material costs have predominantly been offset by recent price increases until FX rates revert to historical level, We expect to operate below our targeted gross margin range. That said, we continue to be focused on realizing approximately $12,000,000 of annualized material As a result, we remain committed to our long term success model, which for gross margin targets 55% to 60% of revenue.

GAAP operating expenses were $50,400,000 and included approximately $4,100,000 in acquisition related intangible amortization and stock compensation expenses and $2,000,000 in restructuring and other transaction costs. Non GAAP operating expense of 44,300,000 was $1,900,000 higher than Q3 of 2021 due primarily to the investments in our sales incentives, combined with a month's worth of Geoslam operating expenses that more than offset the benefit we experienced as a result of strengthening U. S. Dollar exchange rates. GAAP operating loss was $7,100,000 in the Q3 of 2022 compared with an operating loss of $5,200,000 in the Q3 of 2021.

Non GAAP operating loss was $800,000 in the Q3 of 2022 compared to a profit of $100,000 in the Q3 2021. Adjusted EBITDA was $2,000,000 or 2.3 percent of revenue. Our GAAP net loss was $6,300,000 or $0.34 per share. Our non GAAP net income was approximately $550,000 or 0 point for the Q3 of 2022 compared to a loss of approximately $120,000 or $0.01 per share in Q3 2021. I should note that included in our non GAAP financial results was a $1,500,000 gain recognized in other income and expense that was primarily due to the remeasurement of U.

S. Dollar bank balances held by our foreign legal entities. Our cash balance at the end of the quarter was $49,000,000 with no debt. Included in our cash consumption during the quarter was approximately $31,000,000 for the acquisition of Geoslamp as well as $7,000,000 of timing related increases in prepaids and accounts receivable. Additionally, we incurred $3,000,000 in cash payments associated with our German manufacturing transition and nearly $4,000,000 resulting from the revaluation of foreign currency held on our balance sheet.

I should also note that while we have sold a meaningful amount of raw material inventory to Sanmina, nearly $13,000,000 of We remain focused on reducing overall working capital levels with improvements expected in 2023. I also want to remind you that we have consolidated into our balance The Geoslam operations and therefore trend information may be skewed. Moving on to guidance. In the Q4, we expect revenue Between $99,000,000 $107,000,000 which assumes a constant exchange rate from current levels. If the U.

S. Dollar were to further strengthen During the remainder of the quarter, we would again experience a headwind to reported revenue levels. We expect non GAAP earnings per share In closing, notwithstanding the recessionary concerns in the macro environment, We're excited about the momentum in our business for our near term opportunities and remain committed and optimistic about executing on the long term vision we have for generating shareholder value from customers digitalizing the world's physical objects. At the same time, we are actively monitoring demand signals to ensure alignment with Both hardware and software are accelerating and we expect to continue providing increasing levels of value from 4 d virtualized models to our customers throughout 2023. We look forward to sharing our progress with you in the future.

This concludes our prepared remarks at this time. We'd be Please to take any of your questions.

Speaker 0

We'll move first to Jim Rich Choudy with Needham and Company. Please go ahead.

Speaker 5

Hi, good afternoon. This is actually Chris on for Jim.

Speaker 0

Thanks for

Speaker 5

taking the questions. With the rise in interest rates and economic uncertainty, there Some commentary from the U. S. Real estate industry indicating a potential slowing of investment in new construction. Could you talk about how much exposure FARO has to ground up versus brownfield and existing property building operations and maintenance?

Speaker 2

That's a great question. We have traditionally been very strong in the general contractor space And there is a mix between new building and remodeling or restructuring of buildings. And so the actual exposure is probably, I can't quantify it for you, but I would imagine that many of in fact, This afternoon, I actually had a conversation with a general contractor who's very much focused on ground up and they're pivoting toward remodel. And it seems that that's kind of a trend. I think so it's really hard for me to quantify what we think the exposure is But I do believe that many are actually pivoting and our applications and products are applicable to either.

So, time will tell as it relates to what the net effect is, but we've been relatively pleased how resilient, particularly in North America and Asia, Yes, AEC Business has been.

Speaker 5

Got it. That's helpful. Thank you. And with the restructuring substantially complete, Could

Speaker 3

you talk about some of

Speaker 5

the other levers you have to adjust cost structure in the event of a potential recession?

Speaker 2

Well, sure. I mean, we as you can tell, but based on the activity that we just demonstrated in our prepared remarks, We have leaned very much forward in the R and D side of the world, in the R and D, both hardware and software. And certainly, if it was warranted, we could slow that. We are still very much focused on moving our Supply chain to Southeast Asia, which we're beginning to see, but really hasn't taken full effect. And then of course, Continuing to replace open reqs as they appear is what we're currently doing, but certainly we would be able to slow that Replacement REX as time goes on.

Fundamentally, there are probably some other moving pieces that We haven't talked about publicly, but I think we do have some levers. Certainly, the COVID environment has Challenged us to be able to be very flexible as it relates to our cost structure and I think we demonstrated that in 2020. If we have to, knock on wood, I'm sure we could reenact that again. But right now, we are cautiously optimistic about the demand environment, But we read the same things you do.

Speaker 5

Terrific. Thanks very much.

Speaker 2

You're welcome.

Speaker 0

And we'll take our next question from Greg Palm with Craig Hallum Capital Group. Please go ahead.

Speaker 6

Yes. Thanks for taking the questions. I wanted to follow-up on that Last bit of thinking there. I think when we last talked, you were starting to see a little bit of momentum, Wanted to dig in a little bit more if we could.

Speaker 2

Sure. That's a great question. As you know, we tend to our business Tends to kind of crescendo to the end of the year, right, as Q4 is typically our big quarter as it relates to revenue. And we have seen Our opportunity funnel continue to build, which is again I think bodes well for us. As we mentioned, the percent of revenue that's represented by new products continues to grow.

It grew 10% quarter on quarter. So the adoption of our new products, I think, has put us in good stead. There's noise in China. I think everybody's talked about All the earnings that I've listened to, everyone's talking about concern regarding China, China lockdowns. That's always a concern for us.

I think Europe seems to be slower than it has been traditionally. That's been made up for us by the strength In North America, as Alan alluded to. So I think the mix in terms of where the business is, has changed a bit. And we have not seen a dramatic change historically, both in terms of funnel opportunities And segment demand, 3dm still seems to be quite strong. Actually, we've seen a lot of strength This last quarter in public safety, which was a very nice surprise.

And AEC in general in North America and Asia has been strong, Europe continues to lag and that hasn't changed now for a couple of quarters. So I think our mix of business has changed a bit, Greg. And we have nothing right now that says, hey, We're concerned about Q4.

Speaker 4

I think just to maybe add on a little bit, I think we said The fact that hardware revenue grew on an actual currency basis 17% year on year in the 3rd quarter Really, amplifies some of the comments that we've made around our roadmap and I think demonstrate that there is traction with And the customers are appreciating some of the new differentiated features that we have. As Michael indicated, we don't see yet Softening in the Q4, but we read the same news that everybody else reads. And so we're cautious and we are watching it. But right now, we feel pretty good heading into the Q4.

Speaker 6

Yes, makes sense. Shifting gears to Geoslam, Now that's been a couple of months, curious if you can give us any feedback on that Specifically, and I don't know, did you give us what contribution was in the quarter and what your expectations are for

Speaker 2

I'll let Al. Go ahead. I don't think we broke it out, Al. Not that I'm aware of.

Speaker 4

We did not. Correct.

Speaker 2

So overall, we continue to be really impressed with the team. It's a very focused group of guys and gals. And honestly, we have been pleasantly surprised at the level of technology and where they are in their roadmaps. They're very aggressive, which we love. I'm also quite excited by the way they go to market.

And I think, Greg, we've talked in previous worlds Or in previous quarters around trying to grow our share of our business through distribution and these guys Pretty much 100% through distribution. So I think we have a lot to learn there and perhaps leverage. So, so far so good, very excited about What they bring in terms of access to 2 markets that we really don't have much position in. And I think taking their product into our markets is where we That there's some real upside. Obviously, that's not happened yet as we just closed the deal, but we're working on taking Geoslam Products into our traditional markets, which we think, particularly in AEC and Public Safety, there's real demand for.

Speaker 6

Got it.

Speaker 4

In terms of the contribution, Michael is right, we did not actually communicate what the contribution was in Q1, Excuse me, in the Q3 nor what our expectations are for the Q4. But just as a reminder, in our release announcing They did drop what £14,500,000 in the 12 months ending March 31 and about 18% EBITDA. That's pretty good performance that we've now added into our results.

Speaker 6

Yes. And so are you any reason why you wouldn't Expect that full sort of run rate performance on a quarterly basis going forward?

Speaker 4

No reason we would expect it. And I think as we We continue to bring the companies together and are able to move their products more through our channels to our customer set. I think we expect to see some nice increases, But that's probably not for the next 6 to 9 months or so.

Speaker 6

Yes. I mean, I guess just maybe circling back to my initial question, If you exclude that quarterly amount, the call it 4,000,000 The sequential increase from what you reported in Q3 that the guide at the midpoint is definitely less, maybe quite a bit less than what you normally see sequentially. So I'm just trying to tie that out and Just see if it's conservatism versus something else. I mean, you've got a little bit of FX headwinds on Full quarter relative to Q3, but anything else that I'm missing or we should be aware about?

Speaker 2

No, I don't believe so.

Speaker 4

Yes, I

Speaker 2

don't think so. No, I don't believe so. I think We are trying to be conservative in the context of under committing and over delivering. And frankly, We've been burned in the past and so we are approaching most of these quarters or all quarters very conservatively. But I think It's early case with GSAM and what we don't really have is history in their forecasting model.

And so it's really hard to kind of take that to the street. We need to learn that a bit, but I think if history holds true for them, I think we'll be in a good place.

Speaker 0

And we'll take our next question from Rob Mason with Baird. Please go ahead.

Speaker 3

Thank you. Hi, everyone. I'll just stick on Geoslam a moment. Since that Product does go exclusively through the channel and you're primarily direct. How do you feel about where their channel inventories are?

Is that As they come into the organization, are those right sized, I guess, at the moment?

Speaker 2

Actually, we had a review today. I think we've got Some questions about their model as it relates to how they manage that channel in terms of inventory. My understanding from the review is that we they do not ask their channel to hold a great deal of inventory. They manufacture very much like FARO does, which is not a long lead time. Basically, they manage to ship.

So from a lead time perspective, they are pretty much from stock and their channel doesn't Basically have a great deal of inventory. So I think I don't think there's a huge liability there in terms of channel inventory that I'm aware of.

Speaker 3

Okay. And then Michael, if you could just provide a little bit of color about what differentiates Geoslam in the marketplace, you mentioned just where they have some strength, some of their end markets, but how did they go about obtaining those versus the competition?

Speaker 2

We kind of categorize scanning in maybe 3 or 4 different buckets. We are on the bleeding edge, The pinnacle, if you will, in terms of accuracy. And with that accuracy comes some conditions, which means that As you're scanning, you need to set up a fixed tripod and do the scan, move With that, you get this amazing accuracy that has made FARO who we are. What mobile mapping and the SLAM algorithm does is it allows you to actually instead of setting up A tripod, you can literally walk with this scanner through the facility or through the crime scene or through the mine or whatever the application is Without actually having to stop and actually set up a tripod, as a result, you can scan a specific area much quicker. The downside, however, is that you don't get that bleeding edge accuracy that you get with our traditional scanning methodology.

That in some applications is good enough. And so we were not participating in some of those applications where The time constraint was too high. And frankly, there's a cost structure associated with that as well. To get that leading edge accuracy, you need to Spend $50,000 to $60,000 to $70,000 for a scanner where Geoslam has a lower price point, Lower accuracy, but much faster. And so for certain workflows, for example, drone flight, it's actually ideal.

And we were not participating in that market. So that's an example of kind of how we looked at it. We were internally developing a mobile mapping solution. And when Geosign came along, the make buy analysis was such and frankly from a software perspective, their capabilities We're such that we felt that it was much it was a much better deal to purchase versus to build and so the decision. Yes.

Okay.

Speaker 3

That's helpful. Just real quick, I guess, could you walk through some of your major verticals and just how they're Performing at the moment, I know aerospace has been strong. You mentioned a little bit of an inflection in public safety. I'm curious maybe what catalyzed that if you can identify. It's

Speaker 2

a really good question. The public safety is such a fragmented market and we've We've had a lot of success in North America recently. We've had some real success in Europe, which in fact, I will tell you one of the opportunities that we closed Literally took 2 years to close. So the sales cycle in public safety is much, much longer. I think So public safety has been a bright spot for us, albeit a relatively small market.

3 dm continues to be a Position of strength for us both in North America and Asia. And I'll say the same about AEC in general, With the exception of Europe, Europe overall continues to be weaker than we have historically seen. And Anecdotally, by market, it seems that demand continues to be pushed. It's not that we've lost More than we have, in fact, have traditionally, in fact, our closure rate is effectively flat With where we were maybe a year ago in Europe. So the opportunities are there.

They just continue to get pushed and we're not sure that I don't believe that it is a Ferro situation. We actually believe that it's a macroeconomic situation.

Speaker 0

And we'll move next to Andrew DeGasperi with Berenberg Capital Markets. Please go ahead. Hi, this is Stephanie on for Andrea Davisberry. Our question is about the transition to subscriptions and SaaS. When you think that will wrap up and when you think the margin benefit could emerge?

Thank you.

Speaker 2

Well, we actually think this is a several year process. We have begun this process in earnest over a year ago. And I think with excitement and I think some success, and As we talked about, recurring revenue now is up to about 16% of total, which is quite positive. But I believe this is probably a 2 to 2.5 year slog as we convert users into a SaaS Revenue stream. And I think we're well on our way, but I think it's a couple of years.

Speaker 0

Thanks. Al, do you have anything to add?

Speaker 4

No. I guess the only thing I would add, Michael, We have a relatively minor amount of perpetual license revenue that is converting. And so that conversion will take the couple of years that you referenced. At the same time, we have additional subscription initiatives that's going to be driving new SaaS revenue streams. And so the conversion of our Existing revenue will take a bit of time.

The ramp up of additional revenue streams that are focused on solving customers' problems with the three-dimensional data Gathering from our hardware devices will continue to ramp over the next couple of years as well. And so I think that, optically, it will feel less Then the conversion time that Michael just articulated on the specific question.

Speaker 2

Hopefully, that gives you a little more time. Right, exactly. What we've said historically is that we would like to be in a position or we expect to be in a position where 25% Our revenue is recurring in nature and we believe that we ought to be there by the end of 2024 ish. That's kind of internally and externally what we've said.

Speaker 0

Thanks. That helps a lot.

Speaker 2

You're welcome.

Speaker 0

And we'll take our last question from Ben Rose with Battle Road Research. Please go ahead. Hey, Ben.

Speaker 7

Yes. Thank you for taking my questions and good evening. Alan, could you review the geographic mix during the quarter?

Speaker 4

So in the quarter, we actually had Let's see if I got the numbers here right. So roughly about 45% of the revenue came out of the Americas, roughly 27% of it came out of EMEA And 28% of it came out of the Asia Pacific region. And when you look at it from a growth standpoint on an actual currency basis, So again, some of the European and Asia Pacific geographies will have a bit of muted growth, The Americas was up 14% year on year, which again contributes to some of the optimism that we have. And I think that the team A nice job of growing that business on a year to date basis. I think we indicated 10% through the 1st 3 quarters of the year.

Asia Pacific up 9% in the quarter. And then EMEA was down 3%, but EMEA is going to be again going to have the broadest impact from the strength in the U. S. Dollar. China in particular within Asia Pacific has done a very nice job of really conveying the value of our products And ramping with customer set.

Speaker 7

And I'm sorry, thank you for giving the year over year growth is, Was China above the 9% growth for the entire region?

Speaker 4

Yes.

Speaker 7

Okay. And so you feel like you were able to avert a lot of the lockdown concerns that we've heard Coming out of the region?

Speaker 2

So far. I'm would, but so far, yes.

Speaker 6

Okay.

Speaker 7

I was also curious, could we get an update on Sanmina? You mentioned What was going on in terms of a receivable issue at the end of the quarter, but just in general, are basically all of your Products being manufactured there at this point or what's the status?

Speaker 2

Yes. So we have completed the transition to Sanmina. They are performing to expectations. They have done a fantastic job actually keeping up with us. We are now effectively completely out of manufacturing.

We still have break fix and some testing operations in place, but manufacturing is now And we've had, I think, A really great experience in terms of both quality and output. And frankly, they are gearing up for Q4. As We talked before Q4 is our large quarter and we expect we're very confident that we'll be able To deliver everything that the market desires through Q4 via Sanmina.

Speaker 7

And just a question regarding 3dM, you did mention the strength from the Quantum Arm Product. And could you go into maybe a little bit more depth in terms of kind of the Discrete manufacturing verticals that you're serving with your metrology products?

Speaker 2

Yes, I think we've seen aerospace continue and they've been struggling to keep up here for the last Several quarters and we don't see that changing. Automotive and the automotive supply chain has been extremely strong. We've seen a lot of interest, particularly in battery manufacturers for the EV side of that and

Speaker 0

that supply chain. And we

Speaker 2

have been relatively successful in penetrating some of the new EV actual body and white applications. So, automotive continues to be relatively strong in North America. Automotive in Europe is relatively weak And automotive in Japan is pretty much nonexistent for us. So, way down from where it has been traditionally

Speaker 7

For 3d9. Okay. And Alan, you You had mentioned bringing over the potential impact of bringing over the expense base from Geoslam. Could you maybe just clarify your thinking on the impact in Q4 and going forward?

Speaker 4

Yes. So we had about a month of their expense structure within our 3rd quarter Some of it is already baked in. I think when you work through the profitability of the guidance that we provided, Given our traditional gross margin improvement that as revenue increases, which again, I think they would fit very nicely into From a margin perspective that you'll see that the 4th quarter expenses are expected to be a couple of $1,000,000 higher than they were in the 3rd quarter, Again, as you worked through your model, some of that would be Geoscan based, some of it would be other timing related items Because as revenue increases, we have some incremental commissions. That's probably the best way to articulate it, I guess.

Speaker 7

Okay. And then finally, on the cash balance, understand there was a lot of To cash for the acquisition and some other items, where do you see that cash balance Being perhaps over the course of the next year, is this is there sort of a certain level below which you Would prefer not to go at this point, maybe just some elaboration on your thinking about that?

Speaker 4

Yes, I think Michael chime in, but I think the cash balance that we reported here at the end of the Q3 of just a little bit below $50,000,000 We would like to not See it go below that? We outlined a couple of things that should enable us to improve that cash balance. One of them is The receivable balance, I think you might have used the word issue. I just want to be clear, it's not an issue. It was just timing of payment.

Speaker 7

As

Speaker 4

I indicated in prepared remarks, it was We've predominantly collected that here in October. We also had some timing related payments associated with some Our insurance premiums and some other software packages come due in our Q3 and so those dollars went out and will come back to us. So I think that We, by and large, will see a cash balance increase as we navigate and with the 4th quarter Showing some level of profitability given the higher revenue levels. Again, I think we'll see an uptick in our cash balance. We're comfortable where we are, but we'd like to not see it go too much lower than what we just reported in the Q3.

Speaker 0

Okay.

Speaker 7

And then finally, just quickly on GeoSlam. Michael, is it your intent to operate Geoslam as sort of a separate entity at this point? Or How does it get incorporated into the larger FARO structure?

Speaker 2

Well, I think as it relates to the channel, we'll continue to operate that separate as we've got completely different separate customer base, etcetera. So The channel will be managed separately, but ultimately we will integrate engineering organizations and the marketing organizations Into FARO proper and so into our core business. And I expect that that will be done by probably mid year.

Speaker 0

Okay.

Speaker 7

Okay. Thanks a lot.

Speaker 2

Thank you, Ben. Appreciate your interest. Thank you. And

Speaker 0

this does conclude the Q and A portion of the call. I'd now like to turn it back to Michael Berger for any closing remarks.

Speaker 2

We appreciate everybody's attention and we are, as you can tell, quite excited about where we're at and look forward to actually giving you an update on our Q4 and our year end performance. We appreciate everybody's attention. Thank you.