Gulf Island Fabrication - Earnings Call - Q2 2025

Executive Summary

• Q2 2025 revenue of $37.5M declined 9% YoY and 7% QoQ, but exceeded S&P Global consensus of $35.5M by ~6% as small-scale fabrication slowed and Services activity remained soft; GAAP diluted EPS was $(0.04) vs $0.11 in Q2 2024 and $0.23 in Q1 2025 (EPS consensus not available). Revenue consensus: $35.5M; actual: $37.538M*.
• Adjusted EBITDA was $1.9M, down from $2.5M in Q2 2024 and $4.7M in Q1 2025; Q2 includes $0.5M post-acquisition losses from ENGlobal and excludes $1.8M of ENGlobal transaction costs.
• Management highlighted a $20M limited notice-to-proceed (LNTP) for a structural steel project, with an expected full award of ~$35M in Q3 2025—a near-term catalyst and evidence of diversification beyond oil & gas.
• Outlook: Q3 2025 results expected comparable to Q2 (ex-ENGlobal), with a significant improvement in Q4 and into 2026; ENGlobal expected to incur $1.5–$2.0M of operating losses in H2 2025 during integration.

What Went Well and What Went Wrong

What Went Well

• Diversification traction and large-project pipeline: “We received a limited notice to proceed contract for approximately $20.0 million… full award expected during the third quarter 2025,” expanding into structural steel and non-O&G end markets.
• Strategic acquisition to broaden offerings: ENGlobal adds automation/engineering/government services, enabling turnkey module offerings; initial customer reception is “very positive” with new RFQs already coming in.
• Strong liquidity and capital returns: Cash and short-term investments totaled $62.2M; the company repurchased 437k shares for $2.8M in Q2 under its buyback program.

What Went Wrong

• Demand softness and delays: Revenue fell YoY on lower small-scale fabrication activity and weaker offshore maintenance; project awards saw extended decision cycles amid trade/macroeconomic uncertainty.
• Margin pressure: Services EBITDA margin fell to 9.1% (from 11.7% in Q2 2024) on lower revenue and less favorable mix; Fabrication EBITDA fell on reduced utilization and ENGlobal-related losses.
• Near-term drag from ENGlobal: Q2 included ~$0.5M of post-acquisition losses, with another $1.5–$2.0M expected in H2 2025 as the business transitions out of bankruptcy.

Transcript

Speaker 0

Afternoon, ladies and gentlemen, and welcome to Gulf Island Fabrication's conference call to discuss second quarter 2025 results. All participants will be in the listen-only mode for the duration of the call. This call is being recorded. At this time, I would like to turn the floor over to Ms. Cindi Cook for opening remarks and introductions. Cindi, please go ahead.

Thank you, and good afternoon. I would like to welcome everyone to our second quarter 2025 power conference. Our results were released this afternoon, and a copy of the press release is available on our website at gulfisland.com. A replay of today's call will be available on our website after 7:00 P.M. this evening. Please keep in mind that the press release and certain comments on this call include forward-looking statements, and actual results may differ materially. We would like to refer everyone to the cautionary language included in our press release and to the risk factors described in our most recent Form 10-K and subsequent SEC filings. Please also note that management may reference EBITDA, adjusted EBITDA, adjusted revenue, new project awards, and backlog on this call, which are financial measures not recognized under U.S. GAAP.

As required by SEC rules and regulations to the extent used, these non-GAAP financial measures are reconciled to the most comparable GAAP financial measures in our press release. Today, we have Mr. Richard Heo, President and CEO, and Mr. Wes Stockton, Executive Vice President and CFO. Mr. Heo.

Speaker 2

Thank you, Cindi. Good afternoon, everyone, and welcome to our second quarter results conference call. I'm happy to be here with you this afternoon and hope that each of you and your families are continuing to stay healthy and safe. During today's call, I'll provide key takeaways from the quarter, a review of in-market trends, and an update on the progress we've made on our strategic initiatives, including the progress we have made on our recent ENGlobal acquisition. We'll also discuss our second quarter results in greater detail and provide an update on our outlook for 2025. We'll then open up the call for questions and end with some closing remarks. Over the last several years, we have taken important strategic actions to develop a business that is more stable and durable across market cycles.

We focused on reducing risk, growing our services in small-scale fabrication businesses, and further strengthening our project execution. The benefits of these actions were evident during the second quarter, as we were able to generate revenues of $37.5 million and an adjusted EBITDA of $1.9 million, despite the ongoing macroeconomic headwinds stemming from the uncertain trade environment and slower maintenance and capital spending by our offshore services customers. While we were not pleased by the results, our more stable core business allowed us to generate solid operating results, which, combined with our strong financial position, enabled us to continue to invest in our organic growth initiatives, return capital to our shareholders through our share repurchase program, and complete the ENGlobal acquisition. Before getting into our segment results, I'd like to provide an update on our ENGlobal acquisition.

During the quarter, we acquired certain assets of ENGlobal automation, engineering, and government services businesses. The automation business provides engineering, design, fabrication, and integration of industrial automation systems to the oil and gas, renewable energy, and traditional power industries. The engineering business provides various engineering solutions to the oil and gas and renewable energy industries, while the government services business provides engineering and automation solutions to federal, state, and local governments and educational institutions, generally in the form of technical field services. The integration is progressing as expected, and we see the opportunity for meaningful strategic benefits from the transaction. First, the ENGlobal acquisition is expected to broaden our product and services offerings with the addition of automation and engineering solutions. Second, the acquired assets will allow us to expand our customer base and diversify into new end markets, including onshore oil and gas, data centers, and government.

Third, the acquired businesses will help increase the overall value of our existing offerings by including the ability to strengthen our fabrication offerings with supplemental engineering capabilities and systems integration for turnkey module offerings. We are extremely excited by the opportunities presented by the transaction, and while it is still early, our initial view of the transaction is extremely favorable. The early reception from customers and potential strategic partners has been very positive. ENGlobal has great people and very strong product offerings, which was evident in their ability to win work on the market despite their financial challenges. The market seems excited that a well-capitalized, complementary company is now in control of these assets, and we see meaningful opportunities ahead. For example, we have already received requests for quotation for projects as a result of the combined company's capabilities.

We have received inquiries for processed goods and packaged equipment where the client is requesting a turnkey solution of the fabrication, inclusive of systems control installed, and we're seeing opportunities for larger systems integration projects that ENGlobal was not capable of executing on their own. While we will have to work through the integration, which we expect will take 6 to 12 months, and the challenges associated with bringing a business back from bankruptcy, I see strong signs that the acquisition will help us open more doors and give the combined company opportunities to provide more value to our customers. Now, turning back to our legacy business. As we look at our fabrication business, we continue to see extended decision cycles for new project awards in certain end markets due to market uncertainty, even for our small-scale fabrication.

However, we've been pleased more recently to see a pickup in dialogue with customers with large projects who paused their activity in the early part of 2025, and we are happy to share that subsequent to quarter end, we received a limited notice to proceed contract of approximately $20 million. This initial award is for the procurement of materials for a structural steel project, and we expect the full contract to be awarded during the third quarter with a total contract value of approximately $35 million, inclusive of the limited notice to proceed value. If the award timing goes as planned, we would expect to commence fabrication activities in the fourth quarter. With the limited notice to proceed award, we remain optimistic that the longer-term favorable structural drivers for the fabrication market remain in place, and we are confident we are well positioned to win as more projects move forward.

We continue to see LNG, chemical, and marine and civil as potential areas of opportunity for Gulf Island, and with the acquisition of ENGlobal Corporation, we will penetrate into new end markets. We're also encouraged by new opportunities driven by a push for more domestic supply. I feel that we're positioned to take advantage of this buildup and believe we'll see additional positive results before the end of the year. Looking at our services business, while oil prices are off the lows, our customers are still targeting lower overall capital spending levels in the Gulf of America in 2025. This, coupled with the trade uncertainty, has many of our customers holding back spending. Despite the near-term weakness, we will continue to invest in expanding and diversifying our services offering.

While slower than anticipated, we remain optimistic regarding the potential for our cleaning and environmental services business, and Spark Safety has started to pick back up. Finally, as it relates to capital deployment, we remain committed to our balanced capital allocation framework regardless of the recent market softness. We'll continue to prioritize investing in the business to drive growth in our existing services and penetrate new end markets, balanced with the pursuit of acquisition opportunities such as ENGlobal Corporation and capital return opportunities. In fact, we see the potential that our transaction with ENGlobal Corporation could open up additional opportunities for strategic acquisitions and partnerships in our core markets. We're fortunate to be operating from a position of strength and remain committed to our strategic framework with an ongoing focus on driving value for our shareholders.

I will now turn the call over to Wes to discuss our quarterly results in greater detail. Thanks, Richard, and good afternoon, everyone. I will discuss our consolidated results and then provide some additional details regarding our segment performance, putting in context the factors mentioned by Richard and their impacts on the quarter. I will then conclude with a discussion of our liquidity and full-year financial outlook. Please note that as it relates to the ENGlobal acquisition, the post-acquisition operating results for the automation business are reflected within our fabrication division, and post-acquisition operating results for the engineering and government businesses are reflected within our services division. Now turning to our quarter results, consolidated revenue for the second quarter 2025 was $37.5 million compared to $41.3 million for the second quarter of last year. The year-over-year decline was driven by lower small-scale fabrication revenue and weaker services activity.

Adjusted consolidated EBITDA was $1.9 million for the second quarter 2025, down from $2.5 million for the second quarter 2024. Adjusted EBITDA for the second quarter 2025 excludes $1.8 million of transaction and related costs associated with the ENGlobal acquisition, but includes post-acquisition operating losses of approximately $500,000 associated with the ENGlobal business. Specifically for our services division, revenue for the second quarter 2025 was $22 million, a decrease of 3.5% compared to the second quarter of last year, primarily due to lower offshore maintenance activity. Services EBITDA for the second quarter 2025 was $2 million, or 9.1% of revenue, compared to $2.7 million, or 11.7% of revenue for the prior year period, with the decrease primarily due to lower revenue, a less favorable project margin mix, and post-acquisition operating losses of approximately $200,000 associated with the ENGlobal engineering and government businesses.

For our fabrication division, revenue for the second quarter 2025 was $15.8 million, a decrease of approximately 15% compared to the second quarter of last year, primarily due to lower small-scale fabrication activity as we completed several projects during the quarter and experienced delays in the awards of new project opportunities. Fabrication EBITDA for the second quarter 2025 was $1.1 million compared to $1.8 million for the prior year period. The decrease was primarily due to lower revenue, lower utilization of facilities and resources due to reduced work hours, and post-acquisition losses of approximately $300,000 associated with the ENGlobal automation business. These negative impacts were partially offset by a more favorable project margin mix for the current period. For our corporate division, adjusted EBITDA was a loss of $1.2 million for the second quarter 2025 compared to a loss of $2 million for the prior year period.

Adjusted EBITDA for the second quarter 2025 excludes $1.8 million of transaction and related costs associated with the ENGlobal acquisition. The improvement in adjusted results is primarily due to lower incentive plan cost and an insurance gain realized during the current quarter. With respect to our liquidity position, we ended the second quarter with a cash and short-term investments balance of approximately $62 million, as the benefit of our adjusted operating results for the quarter were offset by the capital required to fund the ENGlobal acquisition, which I will cover in more detail shortly, capital expenditures, and the repurchase of approximately $2.8 million of our common stock under our share repurchase program. As of June 30th, we had remaining authorization to purchase approximately $5.3 million of our common stock under the program, which expires in December 2026.

As it relates to ENGlobal, as of June 30th, the total capital commitment related to the acquisition was $5.5 million, which consists of $3.5 million of debtor in possession financing, of which $1.2 million was advanced to ENGlobal in the first quarter and $2.3 million was advanced in the second quarter. A $1.5 million payment was made in the second quarter in exchange for the assumption of a loan from a creditor of ENGlobal and transaction costs of approximately $500,000, of which $200,000 was incurred in the first quarter and $300,000 was incurred in the second quarter. Of these amounts, the $3.5 million debtor in possession advances were forgiven by us in connection with the transaction and represent our acquisition purchase price, and the $1.5 million payment for the assumed loan and the transaction costs were expensed during the first and second quarters as incurred.

At June 30th, our debt obligation totaled $19 million, and our annual payments of principal and interest of approximately $1.7 million will be made in December of each year over the remaining 14-year term of the obligation. Our cash balance and the long duration of our debt put us in a strong liquidity position and provide significant flexibility to pursue our growth objectives and evaluate further opportunities to return capital to our shareholders. Finally, turning to our outlook for the remainder of 2025. As Richard discussed, the ongoing trade and macroeconomic uncertainty has pushed out certain project award decisions for our fabrication business, and lower capital spending by our customers in the Gulf continues to pressure results for our services segment. As a result, excluding the impact of the acquired ENGlobal Corporation business, we expect our consolidated third quarter results to be comparable to the second quarter.

However, we anticipate our consolidated results will improve significantly in the fourth quarter and as we move into 2026, particularly for our fabrication division. Further, as it relates to the acquired ENGlobal Corporation business, we expect operating losses over the back half of the year of approximately $1.5 million to $2 million as we transition the business out of bankruptcy and work to integrate it into our existing operations. These losses are consistent with our expectations for the ENGlobal Corporation business at the time of the acquisition. While these near-term challenges are frustrating, we remain confident in our long-term competitive positioning, and our strong financial position provides us the flexibility to continue executing on our strategic plan. This concludes our prepared remarks. Operator, you may now open the line for questions.

Speaker 0

Thank you. Ladies and gentlemen, we will now be conducting a question and answer session. If you would like to ask a question, please press star and one on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press star and two if you would like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star keys. Ladies and gentlemen, we'll wait for a moment while we poll for questions. Our first question comes from the line of Martin Malloy with Johnson Rice & Company L.L.C. Please go ahead.

Speaker 1

Good afternoon. Congratulations on the award.

Speaker 2

Hey, thanks, Martin. Good afternoon.

Speaker 1

I just wanted to try to figure out maybe if you could spend some time describing the industries, the end markets where you're seeing the pickup in dialogue and the large projects. If there's any more information you can give us about the large project that, you know, structural steel is pretty broad. Is this a first-of-a-kind project for Gulf Island Fabrication, or is this something of the type that Gulf Island Fabrication has done before?

Speaker 2

Yeah. As it relates to the pickup in dialogue, it really is around the LNG and petrochemical markets that we've been chasing. As you can imagine, with some certainty around the tariff positions kind of stabilizing and momentum being built up on FID of certain LNG projects, the frequency of the conversations and, you know, the quality of the conversation has improved. We are seeing a lot more discussions with the customer with regard to LNG and large petrochemical projects. Your second question with regard to just more specificity around this large award is a large award that we, it's an end market that, you know, we play in kind of tangentially, but it is outside oil and gas. Marty, one of the things that we talked about is continuing to diversify Gulf Island Fabrication out of that cyclical oil and gas end markets.

We're happy to share that, you know, all that hard work has paid off in terms of this potential award. The award is just structural steel. It is something that Gulf Island Fabrication is very good at. It's a time-sensitive award, meaning that the customer really saw the value in our capabilities, our large fab yard, our rolling capacity, and just, you know, our track record of doing time-sensitive projects. We're excited about this award. It's an award that will have some high visibility. Ultimately, we look forward to sharing more details of the award here in the next few weeks.

Speaker 1

Great. That was very helpful. Just as a follow-up in regard to some of the interest in Gulf Island Fabrication and the dialogue related to these large projects, are these the type of projects that would have been very difficult for you to win in the past, but because of the tariff situation, the current environment that you're in, maybe they're coming to you for the certainty around tariffs and pricing and ability to deliver?

Speaker 2

Yeah, that's a great question. We are seeing more opportunities come to us because of the tariff. Also, compounding that is this whole kind of push for U.S. manufacturing, right? Both of those policy positions are helping a company like Gulf Island Fabrication. I think the combination of the tariffs and just still the uncertainty around the ultimate value of the tariffs, along with a push for more buy America, made in America, I think both of those points are really helping Gulf Island Fabrication.

Speaker 1

Okay. I'm sorry to do this, but can I sneak one more question in?

Speaker 2

Absolutely.

Speaker 1

I wanted to ask about the labor situation that you're experiencing. There's a lot of very large projects going on in the Gulf Coast right now. Maybe could you speak to a little bit about what you're encountering?

Speaker 2

Yeah. We haven't seen a dramatic impact on the labor as of yet. You're absolutely right, there are large projects picking up in close proximity to, you know, our facility. I'll tell you that where we have a little bit of confidence in our ability to get labor is that we went through a pretty tough labor cycle on two large projects prior to this one. We were able to not only hire the high number of folks that we needed at the peak of those jobs, but also quality employees that wanted to continue to work at Gulf Island. We feel good about our position and kind of location and that competitive environment around the labor availability, especially for these upcoming projects that we're excited about.

Speaker 1

Great, thank you. I'll turn it back.

Speaker 0

Thank you. A reminder to all participants, if you would like to ask a question, please press star and one on your telephone keypad. Thank you.

Speaker 2

In closing, I want to thank our customers and shareholders for their continued support, as well as recognize our employees who continue to demonstrate a commitment to Gulf Island Fabrication's success. For those on the call, thanks again for your interest in Gulf Island Fabrication. If we're not able to connect during the quarter, I look forward to speaking with you on our next conference call and updating you on our progress. Be safe. Take care.

Speaker 0

Thank you. This concludes the Gulf Island Fabrication conference call. Thank you and goodbye.