Himax Technologies - Earnings Call - Q4 2020

Transcript

Speaker 0

Hello, ladies and gentlemen. Welcome to the Himax Technologies Incorporated Third Quarter twenty twenty Earnings Conference Call. At this time, all participants are in a listen only mode. Later, we will conduct a question and answer session and instructions will follow at that time. As a reminder, this conference is being recorded.

I would now like to turn the conference over to your host, Mr. Mark Schwalenberg from MZ Group. Please go ahead.

Speaker 1

Welcome, everyone, to Himax's fourth quarter twenty twenty earnings call. Joining us from the company today are Mr. Wu, President and Chief Executive Officer Ms. Jessica Pan, Chief Financial Officer and Mr. Eric Lee, Chief IRPR Officer.

After the company's prepared remarks, we will we have allocated time for questions and a Q and A session. If you have not yet received a copy of today's results, please email himxmzgroup dot us, access the press release on financial portals or download a copy from Himax's website at www.himax.com.tw. Before we begin formal remarks, I'd like to remind everyone that some of the statements in this conference call, including statements regarding expected future financial results and industry growth, are forward looking statements that involve a number of risks and uncertainties that could cause actual events or results to differ materially from those described in this conference call. Factors that could cause actual results, or events to differ materially from those described in this conference call include, but are not limited to, general business and economic conditions, the state of the semiconductor industry, market acceptance and competitiveness of the driver and non driver products developed by Himax, demand for end use application products, the uncertainty of continued success in technological innovations as well as other operational and market challenges and other risks described from time to time in the company's SEC filings, including those risks identified in the section entitled Risk Factors in its Form 20 F for the year ended December 3139 filed with the SEC in March 2020.

Except for the company's full year of 2019 financials, were provided in the company's 20 F and filed with the SEC on 03/25/2020, the financial information included in this conference call is unaudited and consolidated and prepared in accordance with IFRS accounting. Such financial information is generated internally and has not been subjected to the same review and scrutiny, including internal auditing procedures and external audits by an independent auditor to which we subject our annual consolidated financial statements and may vary materially from the audited consolidated financial information for the same period. The company undertakes no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise. I will now turn the call over to Mr. Eric Li.

Eric, the floor is yours.

Speaker 2

Thank you, Mark. Thank you and thank you everybody for joining us. My name is Eric Li and I'm the Chief IRP Officer. Joining me are Jordan Wu, our CEO and JCPen, our CFO. On today's call, I will first review the Himax consolidated financial performance for the fourth quarter and the full year 2020, followed by the first quarter twenty twenty one outlook.

Jordan will then give an update on the status of our business, after which we will take questions. We will review our financials on both IFRS and non IFRS basis. The non IFRS financial excludes share based compensation and acquisition related charges. The impact of COVID-nineteen has persisted globally, new lifestyle, social activity and economic practice are all dynamically evolving. One of these influences is the unexpected long lasting strong demand for electronics device and the component, which is broadening capacity shortage in semiconductor foundry and the back ends.

In such a favorable but challenging business environment, we continue to steadily implement prudent execution and deliver strong business performance along the way. We preannounced preliminary key financial results for the first quarter on January 7 with revenues, gross margin and EPS all exceeding the guidance issued on 11/12/2020. Today, our reported results for the revenue, gross margin and EPS are all in line with the pre announced results. Both revenues and the gross margin hit record highs in first quarter of twenty twenty. For the first quarter, we recorded net revenues of $275,800,000 an increase of 14.9% sequentially and an increase of 57.6 compared to the same period last year.

The 14.9% sequential increase of revenue exceeded our guidance of an increase of around 10% quarter over quarter, thanks to strong momentum across all major business segments. TV, monitor, automotive driver ICs and CMOS image sensor contributed more to the better than guided sales than other segments. Gross margin of 31.2% exceeded the prior guidance of around 29% and significantly improved from the 22.3% of the third quarter twenty twenty. IFRS profit per diluted ADS was $0.01 $95 exceeding our guidance of around $0.15 to $0.16 Strong sales and improved gross margin contributed to the better than expected earning results. Non IFRS profit per diluted ADS was $0.01 $97 exceeding our guidance of around $0.01 $51 to $0.01 $61 Revenue from large display drivers was $64,200,000 up 15.2% sequentially and up 11% year over year.

The sequential growth was driven by a continuous strong demand for IT products, including notebook and monitor, derived from the ongoing remote working and the distant education. TV revenue was up slightly quarter over quarter and outperformed our previous guidance of a mid single digit sequential decline due to better home entertainment demand from the stay at home economy. Large panel driver IC accounted for 23.3% of total revenues for this quarter compared to 23.2% in the third quarter of twenty twenty and thirty three point one percent a year ago. Small and medium sized display driver continued to grow in the fourth quarter as guided, with revenue of $177,900,000 up 17.3% sequentially and up 119.4% year over year. Smartphone and tablet display TDDI grew robustly in the first quarter, but was offset by a decline of DDICs.

For a year over year perspective, both smartphone and tablet demonstrated extraordinary sales growth, yet growth was constrained by the severe foundry capacity shortage. Small and medium sized segment accounted for 64.5% of total sales for the quarter compared to 63.2% in the quarter of twenty twenty and forty six point four percent a year ago. Smartphone sales continue growing in the fourth quarter with revenue reaching $66,600,000 up 5.1% sequentially and 173.1% year over year. It represented more than 24% of our total sales in Q4. Our smartphone TDDI sales were up around 10% sequentially and up more than 300% compared to the same period last year.

The sequential growth was due to favorable mix of both product and the client detail. In consideration of capacity limitation, our strategy is to prioritize our support to those customers with whom we are major supplier or have long term business relationships. Sales of traditional smartphone DDICs fell by around 10% sequentially and were up around 20% from the same period last year. As we have repeatedly indicated, traditional smartphone DDICs are quickly being replaced by TDDI and AMOLED. Our tablet revenue, one of our top sale contributors throughout 2020 reached $67,400,000 for the first quarter, another record high.

The Q4 sales grew 25.3 sequentially and 291.5% year over year. The tablet revenue accounted for more than 24% of our total sales in the first quarter, slightly higher than that of smartphone. Despite smartphone have a much bigger market size than tablet, sales of our smartphone and tablet were equally weighted for the first quarter, indicating our favorable capacity allocation toward tablet segment, a reflection of our leading position in that market. For tablet TDDI, the sequential revenue increased significantly by over 80%. This marked the third consecutive strong quarterly increase since the initial mass production in the first quarter of twenty twenty.

It reflects the robust customer demand from the Android tablet market, where we are main or sole source suppliers to all leading end customers. Improved product mix with increasing shipments in high end products with active wireless also ascribed to the satisfactory sales growth and help our overall margin improvement. Revenue of traditional discrete driver ICs for tablet decreased 12.3% sequentially, but increased 68.8% year over year in the first quarter. Our first quarter driver IC revenue for automotive amounted to $37,500,000 up 32.4% sequentially and up 11.9% year over year as carmaker resumed production in response to a recovery of global automotive demand from Q3 twenty twenty. However, we were unable to scale off fast enough to meet this surging demand for all customers due to capacity shortage.

Automotive driver IC accounted for more than 13% of total revenues. During 2021, we expect to further our automotive display driver IC market share from the current level of more than 30%. Jordan will elaborate on this in a few minutes. First quarter revenue from our non driver business was $33,700,000 up 3.3% sequentially, but down 6.4% year over year. The sequential increase was mainly a result of increased shipment of TCOM ICs for high frame rate and high resolution displays as well as CMOS image sensor products with strong demand coming from notebook and web camera applications.

However, the increase in sales was offset by a decrease in WLO shipments to an anchor customer. The year over year reduction in sales was due to a decrease in WLO shipment. Non driver products accounted for 12.2% of total revenue as compared to 13.6% in third quarter of twenty twenty and twenty point five percent a year ago. Gross margin for the first quarter was 31.2%, up eight ninety basis points sequentially and up ten sixty basis points from the same period last year. The much improved gross margin can be ascribed to two main reasons favorable product mix and industrial capacity shortage.

The growth of higher margin products notably, AA TTDI, TCOM and automotive drivers, outpaced that of other product category during the quarter, thereby enhancing our corporate gross margin. The lift of gross margin for the first quarter also reflected strong overall demand and the better product pricing on rising material costs across foundry, assembly and testing, all undergoing severe capacity shortage. Not meeting all demands, we were able to allocate the limited capacity to the product with better margins. Our IFRS operating expenses were $43,800,000 in the first quarter, down 0.8% from the preceding quarter, but up 17% from a year ago. The sequential decrease was caused by negative difference in RSU expenses, offset by increased cash bonus as we reported in the last earnings call, to further reward employees for the better than expected financial results and higher R and D expenses.

The year over year increase was result of increased salary and cash bonus along with higher R and D expenses. Despite a year over year increase in operating expenses, The operating expenses ratio was reduced from 21.4% in Q4 twenty nineteen to 15.9% in Q4 twenty twenty, reflecting our careful management over operating expenses. Non IFRS operating expenses for the first quarter were $43,500,000 up 11.8% from the previous quarter and up 18.1% from the same quarter in 2019. Reflecting higher sales and better gross margin, ISIS operating profit was 42,200,000 for the first quarter with operating margin of 15.3%, up from 3.9% in prior quarter and up from minus 0.8% in the same period last year. First quarter non IFRS operating profit was $42,500,000 or 15.4% of sales, higher from $14,700,000 or 6.1% of sales last quarter and up from minus 0.4% from the same period last year.

IFSI's profit for the first quarter was $34,000,000 or 19.5¢ per diluted ADS compared to $8,500,000 or $0.49 per diluted ADS in previous quarters and $1,000,000 or $0.06 per diluted ADS a year ago. Fourth quarter non IFRS profit was $34,200,000 or $19.7 per diluted ADS compared to non IFRS profit of $12,600,000 or $0.73 per diluted ADS last quarter and non IFRS profit of $1,500,000 or $0.9 per diluted ADS for the same period last year. Now let's have a quick overview on 2020 full year financial performance. Revenue totaled $887,300,000 in 2020, a 32.1% growth over 2019. In the first half of the year, COVID-nineteen and The U.

S. Sanctions on China brought turbulence to the market. However, our business rebounded strongly throughout the second half with fresh demand brought by the new stay at home economy. Among all three major product categories, small and medium sized display driver posted the highest growth of 67.7% year over year in 2020, with sales totaling 5 and $15,700,000 As leading Android tablet brands all adopted our TDDI solutions and the global smartphone sales rebounded, we saw extraordinary business momentum for both product areas in 2020. Revenue from large panel display driver totaled $240,800,000 in 2020, a mild increase of 1.5 year over year.

During the pandemic, the surge in IT demand boosted our sales on monitor display drivers up by high teens and the notebook display driver up around 60% respectively. TV sales, however, declined by high single digit year over year due to weakness in global TV market, which was negatively impacted by COVID-nineteen outbreak. Non driver product sales totaled $130,800,000 an increase of 2.9 year over year. The year over year increase was mainly from TCOM amidst the growing need for high frame rate and high resolution display in the CIF due to the continuous strong demand in notebook and web camera for work from home and online education. This increase was offset by WLO as a legacy product of an anchor customer gradually decreased.

Gross margin in 2020 was 24.9%, up from 20.5% in 2019. The year over year improvement was mainly due to strong sales in second half and a more favorable product mix. As previously mentioned, robust demand pushed foundry capacity constraints to a more severe level, which in turn enable better pricing. IFRS operating expenses were $162,900,000 up $6,600,000 or 4.2% compared to last year. The increase came from higher expenses in share based compensation, cash bonus, R and D expenses, as well as salary, but offset by lower traveling fee.

Notably, the stronger NT dollar against U. S. Dollar in 2020 contributed to the around $3,900,000 of operating expenses increased, because while our accounting was U. S. Dollar dominated, we pay the bulk of our employee salary as well as much of our Taiwan local incurred expenses in NT dollar.

However, the operating expense ratio of 2020 was reduced to 18.4% from 23.2 in 2019, indicating our consistent management of operating expenses. IFI's operating income was $57,900,000 in contrast to a loss of $18,300,000 from 2019 due to higher sales and higher gross margin. For the same reason, non IFRS operating income was $64,400,000 an increase of $80,900,000 from a loss of $16,300,000 in 2019. Our IFRS profit for the year was $47,100,000 or $0.02 $72 versus a loss of $13,600,000 or $0.79 per diluted ADS. Non IFRS profit for 2020 was $52,300,000 or $0.03 $02 per diluted ADS, up $64,400,000 year over year from a loss of $12,100,000 last year.

The upswing in income was a result of better sales and higher gross margin along with well managed operating expenses. Turning to the balance sheet. We have $201,400,000 of cash, cash equivalents and other financial assets as 12/31/2020, compared to $112,100,000 at the same time last year and $142,900,000 a quarter ago. The high cash balance was mainly a result of an operating cash inflow of $67,700,000 during the quarter. Restricted cash was $104,000,000 at the end of Q4, the same as the preceding quarter compared to $164,000,000 a year ago.

The restricted cash was used to guarantee the short term secured borrowings from the same amount. We had $58,500,000 of long term unsecured loans as of the end of Q4, of which $6,000,000 was current portion. Our year end inventory as 12/31/2020 were 108,700,000 down from $125,700,000 last quarter and $143,800,000 a year ago. Accounts receivable at the December 2020 was $243,600,000 up from $221,100,000 last quarter and up from $164,900,000 a year ago. DSO was one hundred days at the year end, as compared to ninety days a year ago and ninety nine days at the end of last quarter.

As highlighted in last earnings call, given the foundry and the back end capacity shortage, our inventory level will stay at a relatively low level in the quarters to come. Net cash inflow from operating activity for the first quarter was $67,700,000 as compared to an inflow of $33,500,000 last quarter and an inflow of $23,400,000 for the same period last year. Cash inflow from operations in 2020 was $102,600,000 as compared to July in 2019. First quarter capital expenditures amounted to $800,000 versus $1,200,000 last quarter and $2,700,000 a year ago. The first quarter CapEx was for R and D related equipment.

Total capital expenditure for the year was $5,800,000 mainly for design tools and R and D related equipment. In comparison, the CapEx for 2019 was $45,900,000 of which the vast majority was for the purchase of land, the construction of a new building and WLO capacity expansion. As of 12/31/2020, Himax has 173,800,000.0 ADS outstanding, little changed from last quarter. Our fully diluted basis on a fully diluted basis, the total number of ADS outstanding is 174,100,000.0. Now turning to our first quarter twenty twenty one guidance.

For the first quarter, we expect further revenue growth from the already high level of Q4 twenty twenty in most of our business sectors. Gross margin should see another uptick and could reach another quarter high. For the first quarter, we expect revenue to increase by 5% to 10% sequentially. Gross margin is expected to be 37% to 38%, depending on the final product mix. With increase of both revenue and margin, net income should increase substantially in the first quarter.

IFRS profit attributable to shareholders is expected to be in the range of $0.30 to $0.34 per fully diluted ADS. Non IFRS profit attributable to shareholders is expected to be in the range of $0.03 $01 to $0.03 $41 per fully diluted ADS. Revenue, gross margin and EPS will all likely reach quarterly highs during this quarter. With that, I will now turn the call over to Jordan. Jordan, the floor is yours.

Speaker 3

Thank you, Eric. As we highlighted before on previous earnings call, capacity shortage appears to be a long term phenomenon. As we enter the year 2021, the shortage has become even more severe and has extended to backend facilities that include assembly and testing. As a leading industry player with superior resources and engineering capability to diversify and enlarge the vendor pool along with long term business relationships with both foundry and backend suppliers, we engaged early and have successfully in securing more capacity for 2021 as compared to the level of Q4 twenty twenty when we reached the recent peak quarterly shipment. In addition, we are also optimizing capacity allocation among our diversified foundry suppliers by making the right products at the right fabs with an aim to fully utilize the capacity accessible to us.

Among the product areas for which we have secured a meaningful capacity increase is automotive, where the global shortage for semiconductor supply is overwhelming. We expect the total capacity available to us to increase quarter by quarter in 2021 and we'll continue our efforts in securing further capacity. As far as we can see, the overall semiconductor industry supply will not have any significant increase anytime soon, while strong demand is likely to persist longer than expected. In such an environment, Himax is a preferred supplier to work with for our sizable scale, diversified vendor pool and extensive product offerings. Our strength in a number of high margin businesses will also help our ongoing margin improvement efforts.

For example, with strong demand for tablet expected to remain our being the preferred vendor for major Android names will ensure the high margin contribution continues. Likewise, our leading position in automotive display represents a solid support for our margins as we anticipate our robust sales growth in this high margin business for the coming years. Moreover, gross margin improvement can also come from new non driver products notably our high end timing controller, Wi Fi, ultra low power AI and three d sensing. Again, margin expansion will always be one of our major business goals for this year and beyond. Now let us start with an update on the large panel driver IC business.

For the first quarter, we expect large display driver IC revenue to increase by low teens sequentially. For notebook IC segment, we anticipate another impressive quarter of high growth in Q1, a continuation from previous quarters, increasing substantially from the previous quarter due to the extension of strong demand derived from persisting remote working and e learning. As for monitor IT sales, on the other hand, we expect a sequential decline in the first quarter due to the capacity shortage as we are unable to meet all the demands. As TV sales through remains strong and TV panel shortage increases, our TV segment looks set to end the first quarter with a better than seasonal momentum of around 10% sequential growth. Recently, we saw customers proceeding with aggressive promotion in high resolution models that require high end drivers and T Con's in anticipation of sustained strong demand for home entertainment during the pandemic.

However, our display driver IC and T Con shipments are still kept by supply shortage in foundry and packaging despite firm demand from customers. Now let's turn to the small and medium sized display driver IC business. In the first quarter, we see continuous strong TDDI sales for both smartphone and tablet, which demand still surpassing supply. Foundry capacity remains a major issue that adversely impacts our shipping capability. With smartphone and tablet sharing the same foundry pool, we strategically allocate capacity in favor of tablet as we are the dominant supplier in Android tablet market.

For Q1 tablet sales, we expect another high single digit sequential growth fueled by consumer demand for home working and remote learning needs as well as higher TDDI penetration. We expect Q1 smartphone sales to slightly increase by mid single digit in which smartphone TDDI revenue is projected to have consecutive mid teens growth and smartphone TDDI would continue its declining trend. Tablet was one of our top sales contributors in 2020, thanks largely to the fast rising TDDI penetration for Android NAMs and the strong demand driven by the stay at home economy. To further broaden our product offering and solidify our market position, our tablet TDDI has moved toward higher frame rate, higher resolution and larger screen size solutions. We have also enhanced touch accuracy through our leading active stylus design for better quality handwriting and drawing.

As stated before, Himax is highly committed to AMOLED technology. Our development started from smartphone and has extended to wearable tablet and automotive. We have some encouraging progress with leading Chinese panel makers and we report in due course. We believe AMOLED driver IC will soon become one of the major growth drivers for our small and medium panel driver IC business in 2021. Turning to the automotive sector, the global shortage of semiconductor components has brought great challenges to the world's automotive industry.

As most of the world's lockdown periods and tightening foundry capacity combined with sudden surge in orders due to pent up demand have left the industry facing an even more severe shortage compared to other sectors. Customers now rely on just in time delivery of IC components to preserve production and some reportedly already suspended production for days or even weeks. In consideration of unseasoned sales demand amidst high capacity shortage, we worked strategically with panel makers, Tier 1s and end customers across different continents and have secured a large volume of foundry capacity while managing swift production adjustment to meet customers' production schedules. By offering our supportive logistics, we hope to further our relationships with customers who can in turn help accelerate our new technology into their new models going forward. Limited by large scale supply shortages, our automotive ICs segment is expected to deliver a mid teens sequential increase in the first quarter.

With electric vehicles quickly emerging as the next big thing, we see the car market embracing new display technologies and shifting towards larger, more sophisticated and higher performing displays like never before. Already the market leader in automotive display driver business, we foresee further market share gains in the coming years in this fast growing market. We continue to sustain our competitive position with a comprehensive product offering for advanced new features such as TDDI for In Cell Touch, Novol DIMMIN, cascade topology connection, point to point high speed interface bridging functions and LTDI for large in cell displays. As a reminder, we launched the world's first TDDI design for automotive displays technology, which started shipping in 2019 with meaningful volume anticipated starting 2021. As EV grows in popularity and autonomous driving develops, our technological prowess continues to separate us from peers for the next generation display for automotive.

For the first quarter, revenue for the small and medium sized driver IC business is expected to increase by around high single digit with demand continuing to surpass supply. Capacity shortage again remains a major factor as our production has been unable to respond quickly enough to the unexpected rapid growth. Now let me share some of the progress we made on the non driver IC businesses in the last quarter. First on timing controller, the aggressive promotion by major TV brands that I mentioned earlier will benefit our high end T CON business as our eight ks TV timing controllers as well as display drivers have been widely adopted by multiple leading end customers. Our T CON technology not only provides higher resolution, higher frame rate and better image quality, it can also enable lower power in products where power consumption is critical.

Already 5% already over 5% of our total sales, timing controller products enjoy better margin and ASP than those of display drivers and we expect this segment to be an extensive long term growth area. Our T Card revenue in the first quarter, while limited by capacity shortage in IC packaging is expected to increase by high teens sequentially. Next is a quick update on WLO. The fourth quarter WLO revenue decline that Eric reported earlier was a result of lower shipments to an anchor customer. However, in the first quarter of twenty twenty one, sales are expected to increase substantially, thanks to resume shipments to fulfill the anchor customers' higher demand.

The sequential shipment increase and the higher capacity utilization in our WLO factory will positively contribute to our Q1 gross margin. Meanwhile, with our leading nano imprinting technologies and diffraction optics design capability, we continue to engage and collaborate with key customers and partners for their next generation products with focuses on ToF three d sensing, ARVR gadgets, biomedical devices and others. Notably, we are seeing more ToF camera design activities among Android smartphone makers for three d sensing and are making good progress by offering our leading ToF optical components, including defective DoEs, micro lens arrays and diffusers to meet diversified demand from a wide variety of customerspartners, including next door suppliers, ToF sensor vendors, ToF module makers and smartphone OEMs. Next, let me give you an update on three d sensing for non smartphone segment. As mentioned before, we provide customers who wish to design their own structured light based three d sensing solution with our proprietary three d decoder IC.

Our three d decoder can accelerate total image processing for face recognition and offer best in class security authentication. It was already certified by the leading Chinese electronic payment standard with requirements of accurate data decoding, timely operation and strict privacy. We have started volume shipments in the last quarter with decent order pipeline throughout this year and further new design in sockets on the way. On the other hand, for our structured light three d sensing total solution, small volume shipments are expected for business access control and biomedical inspection devices in the first quarter. More design ins and engagements are progressing and we continue to receive numerous inquiries with new ideas of applications that never occurred to us.

Now switching gears to the WiseEye Smart Sensing Solution. As I mentioned several times on previous earnings calls, in order for our WiseEye technology to maximize market visibility and satisfy demand for emerging applications, two business models are adopted, namely total solution and discrete component. For Total Solution, we are currently aiming at notebook, TV and air conditioner applications and have received positive feedbacks. We expect to start a solid production ramp up by the end of twenty twenty one. With joint efforts with our subsidiary, AMSA and other algorithm partners, further engagements are on the way for more applications such as doorbell, door lock, automotive and various IoT devices for industrial and commercial uses.

We are thrilled about the business progress achieved. For the other business model where we provide key components as reported earlier, our W1 plus AI processor adopted Google TensorFlow Lite for microcontroller framework and has successfully demonstrated our unrivaled computing capability with ultra low power. In December 2020, we partnered with SparkFun, an online retail store to distribute Himax W1 plus AI evaluation board and AOS sensor modules. Developers can now access our technologies easily from SpotFund and transform their AI enabling concept, which call for ultra low power and computer vision AI into real products. Furthermore, we teamed up with HIMPULSE, which provides a leading end to end AI developer platform offering intuitive user interface.

On HIMPULSE platform with a single button press and within seconds, developers can now generate the latest neural network AI model and export it directly onto the WM Plus evaluation board. The high technical obstacles developers usually face can therefore be dramatically lowered. Together with our partners, we are carrying out a wide range of promotional activities to broaden the wide size market reach and establish direct contacts with small AI developers. As an illustration, recently Himax and Edge Impulse jointly hosted a webinar discussing ways to help developers get started with the world's most powerful platform that ends enabling embedded machine learning everywhere at extremely low power consumption. We will continue to aggressively pursue such online marketing campaigns going forward.

We believe the Wi Fi offerings will start contributing to our top and bottom lines later this year. We aim to make it a major contributor to our long term business growth. Now turning to our CMOS image sensor business update. We see continuous surging demands for our CMOS image sensors for web camera and notebook as the new norm of virtual conferences show no signs of receding. However, our actual shipment has been badly kept by the foundry capacity available to us.

Separately, our industry first two in-one CMOS image sensor like Suppose RGB mode for video conferencing and ultra low power AI mode for facial recognition has penetrated the laptop market for the most stylish super slim bezel designs. We have shipped small quantity in fourth quarter and expected to ship more during 2021. Regarding ultra low power always on CMOS image sensor, which targets in battery powered or always on applications. We are getting promising feedback and design adoptions from customers in various markets such as car recorders, surveillance, smart electric, meters, drones, home appliances and consumer electronics. In Q1, the CIS revenue is expected to be up mid single digits sequentially, although we still cannot fulfill all the demand due to foundry capacity constraint.

For non driver IC business, we expect revenue to increase by low teens sequentially in the first quarter. That concludes my report for this quarter. Thank you for your interest in Himax. We appreciate your joining today's call and we are now ready to take questions.

Speaker 0

And are we ready to take questions at this time?

Speaker 1

Yes.

Speaker 0

Your first question comes from the line of Jerry Su with Credit Suisse.

Speaker 4

Hi, Jordan and Eric. Thank you for taking my question and congratulation on the good results. I think the first question is surrounding the industry wide capacity constraint. Can you give us a little bit more color about what is your fulfillment rate right now? And then I think for in the next couple of quarters, do you think that the supply constraint can be eased for industry or for Himax?

And how should we think about the pricing environment for the upcoming quarters? Thank you.

Speaker 3

Thank you, Jerry. Honestly, I would rather not give specifics on our so called fulfill rates because guess why all our customers will be watching and trying to compare their fulfillment rate against our average. So that is kind of a sensitive topic. But I can tell you, it's not very high. Although I have to say, sometimes you wonder whether 100% of those demands are real demands, whether they are customers inflating their demands because of the shortage, right.

And so I mean, we try to screen them out. We try to support those demands with solid foundation, but we certainly have some doubts about some of the demands. As far as whether the situation where it is during the year, I think our view is that the industry wide capacity shortage is going to last at least till the end of this year. Obviously, I'm not economist and I cannot really predict how the economy is going to evolve during this year with the pandemic and also the vaccination. So I'm putting that as I'm setting that aside and I'm assuming we're not going to see a very strong rebound during this year.

And even with that assumption, I think the capacity constraint is likely to persist for the simple reason that mature technology simply we are not seeing any meaningful increase in capacity. While there are just a ton of new applications queuing up to consume more of those capacities. And we are I mean, our display driver IC, which always require high output voltage and I. E. We have to use mature technology.

So we are certainly one of the major users of those capacity. And from our driver IC's point of view, certainly we are not seeing any sign of the capacity constraint receding anytime soon, certainly not within this year. Having said that though, I think I've kind of touched base briefly on my prepared remarks. Think we are I can say we are happy, but I think we are well prepared for the capacity of this year. And for that I'm comparing our expected output meaning capacity available to us, offer to us, right by our various foundry partners.

So I'm comparing those numbers on a quarterly basis the number of last quarter meaning Q4 of last year when we reach our peak output as we all know, right. So I'm comparing our this year's quarterly output expected quarterly output to the highest output of last year. And even with that comparison, I think we expect to see increases from Q4 last year and we expect to have quarter by quarter increase during this year. And very notably, I want to emphasize our stronghold in particular is in automotive display driver IC where we believe we are the world market leader, we have the number one market share the pressure is the highest obviously as a result. But also that is an area we have secured the most meaningful capacity increase compared to last year.

So that's very good news for us, for our customers, including those end customers who very often has established direct dialogues with us to get a better feel about the capacity increase. And not just that we believe we have a good roadmap for next year as well, meaning the capacity will continue to increase from that of this year. So I think that is very good news for us that kind of ensures our continuous revenue growth for this year. And I can say pretty much the same for all other major product areas only that I can say automotive display IC for Himax in particular, we have secured the most meaningful increase of capacity and probably with the highest degree of certainty as well. So that's something I wish to highlight.

So I'm sorry, I didn't effectively answer your question directly, I hope I do try to give a good overall flavor and color of the capacity situation for for Himax right now.

Speaker 4

Okay, that's great. Thank you. And then in terms of pricing, how should we think about the pricing going forward? And then I think you guided gross margin to improve to 37%, 38%, which is about six percentage point increase. How much of that is coming from ASP increase?

Speaker 3

It's hard well, firstly, it's confidential and secondly, it's really hard to compare because you have to knock down the cost increase as well. I mean, bear in mind, cost also increased rather significantly as you guys all know. So without addressing directly, without giving you a direct to this number, I can share with you how why the margin improvement and how the margin outlook is going to be like going forward at least this year, right. So firstly, capacity constraint and that certainly means better on pricing position for us, right. Meaning we can very often transfer the cost increase to customers and a bit more.

And we talk about better product mix as well. And I want to probably elaborate a little bit on that, What do we mean by better product mix? It actually come from several perspectives. Firstly, obviously when you are facing shortage, you have a tendency to allocate more of your output to higher margin products to make more money, right? That's very obvious.

So that's the first most obvious point. And secondly, for similar reason, we also have a tendency, our customers as well. When our total capacity is kept, we want to produce more higher end products and that applies to TV, monitor, notebook, smartphone, tablet, automotive everything, right? And I think, I mean Himax being the industry leader and our customer recognize that. So when our capacity is kept, they want us to focus more on those higher end products, while probably leaving those lower end products some of our lesser competitors.

So that typically means better profit and better ASP for us. And certainly, a few sectors which is already happening, happens to enjoy better margin historically. They are growing our other businesses and that on a weighted average basis certainly enhance our gross margin. So I'm talking about automotive, I drive IC for one that's very obvious, tablet TDDI and timing controller, higher end timing controller. And automotive, I think there is a if you ask me across all different industries we are in, I would say the sector with the highest confidence level for growth this year, I would say you'll be the automotive which is set to enjoy a good rebound from the very low of last year.

So that is going to outgrow our other businesses very likely and it happens to enjoy the best margin among our products. Taply TDDI as well. Now, Taply, whether Taply will enjoy growth this year is a big question mark, the pandemic and so on, right? I don't know. But I think for us it's about TDDI penetration into tablet market, right?

So last year our estimate is TDDI penetration is about 20% last year and this year is set to grow to about 30%. So with the same number of total units for the market, you're talking about 50% growth for TDDI and that benefits us tremendously because we are the dominant TDDI provider for tablet in Android market. Especially more of those TDDI tablets tablets will start to offer active stylus, which is to represent even more margin for us, right. Now higher end timing controller, I've talked a little about automotive notebook, TV certainly gaming monitor and so on, right. Again, T Con is suffering big time from IC packaging shortage.

So for that again, both customers and us are paid off allocating our limited resources to higher end products. Right, so I think for those reasons, I feel pretty good about our gross margin prospect for this year. Longer term, I do want you guys to focus on our certain of our non driver IC products. Notably, WiseEye, I think is really promising. I'm personally extremely excited about the progress we are making.

We have our mass production ready sample out only in last September and look at the engagement, the degree of engagements, the activities we already have. I've talked a lot about that in my prepared remarks. So I don't want to repeat that, but it's very exciting. So again, the important thing is we feel the mass production will commence towards the end of this year. And after that, I believe it's a very long tail, low high energy barrier, high margin, high ASP products, where we are going to play a very unique role in terms of providing such AI for end devices with ultra low power.

So I think that is something I feel very good about enhancing our long term gross margin overall. So I hope that kind of address your questions pretty thoroughly.

Speaker 4

Yes. Okay. Thank you. Thank you, Jordan.

Speaker 3

Thank you, Jerry.

Speaker 0

Your next question comes from the line of Tristan Gerra with Baird.

Speaker 5

Hi, good evening. Just following up on the prior questions about clearly helped by mix and the supply constraint. How should we look at the potential timing of peak? Some companies have talked about supply coming back in the second half of this calendar year, which presumably will alleviate a little bit the constraint. There's also the potential at some point for automotive to slow down given that there is probably some amount of double ordering given the tightness currently in the market.

So what I'm trying to get a sense is, when do you think even as supply continues to become strained, it actually gets less constrained than it is now? And when do you think supply will eventually catch up in automotive, meaning that you're starting to see a little bit of a normalization of supply demand? There a way to assess whether that's something that may happen in the second half of this year or what timing do you have in mind potentially?

Speaker 3

I think it my visibility is different for different product segments. And again, I just want to carry on with my previous answer to Jerry's question, the highest degree of confidence for me will be automotive sector in which I think there's no sign of receding and in fact customers backed by their end customers or panel customers backed by Tier 1s, which are backed by end customers. They are prepared to place orders, term orders, non cancelable orders way beyond the year end. And now rather than worry about double ordering or demand disappearing, I mean, our worry is more on do we make our shipments in order for their production line not to be suspended. It's pretty serious honestly, pretty serious.

They are talking about because we don't want single driver IC that can achieve a car because they will have no critical display, right. So for that, I think the visibility is very, very long and we are actually are going through different schemes with different customers and our foundry partners, many of which with contractual arrangements to secure that throughout the ecosystem. We know what we are doing and our customers know what they are doing and we can just focus on making more outputs and securing more capacities and making sure their production is not suspended. So for automotive, honestly, I don't worry a bit, But it's certainly harder to say. For example, the IT demand, people are talking about the stay at home economy and all that, right.

So don't have a crystal ball. I don't know how that demand is going to evolve with the vaccination and the COVID-nineteen situation and all that. So what we do is, again, we follow the customers production orders extremely closely. And one thing, of particular interest is that throughout different sectors, we are now having a much closer business and certainly shipment related discussions directly with the end customer. Typically our direct customers are panel makers, right, who in different industry various, customers.

But now whether it's notebook or TV or automotive or cell phone or otherwise, we have very direct frequent dialogues with leading customers in their respective sector. And for that our visibility certainly gets improved, right. And sometimes you see the end customer stepping in to secure capacity and help allocation decisions. For example, certain of our IC should be shipped to panel maker A rather than panel maker B and so on, right. So we start I think again, we don't have a crystal ball, we just have to work very hard and make sure we are as close as possible to the end customers.

And through end customers and through our direct customers, we will get to have a good visibility about the backlog, the inventory level, the production status, even the demand status and all that, right. So we just have to watch very, very closely. But as far as we can tell right now, at least for this phase driver IC is concerned, there is really we are not seeing any sign of the constraint receded Because again, I mean, the demand is very strong across different sectors, but there's simply no meaningful capacity increase

Speaker 5

in the industry. Okay, that's great color. Thanks for that. And then for my follow-up, a few years ago, you obviously had traction with some early but leading AR device providers with very high content. You also talked about and that was maybe up to a year ago about opportunities in holographic displays.

Given the potential for Apple to launch AR devices by next year, which presumably will trigger a lot of companies to basically have similar devices over time. How do you feel your position? What type of initial engagement you think you have in both AR and holographic displays? And what's the potential timing? And that's leveraging on both your wet ground lens technology and also your LCOS technology?

Speaker 3

Well, you for the question Tristan. A few years back, we talk about that a lot because there was real major customers and real products. And unfortunately, the launch of those products and the business result didn't unfold very well as we all know, right. And certainly we continue to play a critical role in terms of providing the microdisplay and related optics for ARVR gauges in particular AR which requires see through feature rather VR with VR your eyesight is blocked by the image, but with AR you see through. So when you see through our technology is needed.

So I can say with good degree of confidence that if this does happen, if the industry does pick up again, pick up momentum again, we are going to play a role. But to don't want to be overly optimistic about this because I think to be honest, I still see lots of both technical and business barriers ahead of us for the AR goggles to be to become a real affordable and a real farm products for people in general to want to own. And certainly people are talking about Apple and I don't want to comment on customers one or the other certainly not Apple. And so we'll see. But I mean, certainly you are right, if Apple does launch something and successfully and then other people will follow certainly.

But again, I can't comment the specifics on any specific customers. But I think I want to give a warning that we are not too optimistic about it being the insider in the marketplace. Again, I'm seeing still barriers both technically and technically being how do you lower the price substantially. I mean, the lessons of the previous products are they're just way too expensive, It's way beyond anybody's any usual consumers affordability. And they are switching that into industrial use, which means very low volume, right.

So for a company of our scale, is not something it cannot be something very meaningful, right. So the challenge is how do you create the kind of image, the size, the color, the power consumption, the processing power and so on, right. The kind of image that involves not just semiconductor but also a lot about optics. How do you create that kind of image that average consumer will find attractive and yet you have to really substantially reduce price. And if you can achieve that, then the next barrier is how do you create enough content, attractive content.

So I think two years I think is overly optimistic to be honest. But again, we remain to be a key player. People do come to us still. We're still engaging with customers for projects, but we are just we don't want to overspend on those all investment, overspend on that sector until we feel we have a good position already and we just have to hunker down and wait for it to happen. And a lot of things is really beyond our control.

We are just the display microdisplay and office provider. We can't really cover the whole application and total cost and all that kind of issues.

Speaker 5

Great. Well, thanks for the color. Very much appreciated.

Speaker 3

Thank you, Tristan.

Speaker 0

Your next question comes from the line of Donnie Ting with Nomura Securities.

Speaker 6

Good evening, CEO and Eric. Congratulations on good results. I think I have two quick questions. So the first one is that I think people are talking about how tight the capacity would be and when will it be likely to be eased. But in the reality, for example, if we break it down to like eight inches or 12 inches capacity by different products, which one you think is most likely to be used in the future?

For example, if considering the node migration as well as the capacity expansion lead time, what kind of products you think that would be most likely to be used in the future? And which one will be the most difficult to be used? So this is the first question.

Speaker 3

Okay, Donnie. It's not an easy question. It's a good question, but it's not easy to answer because I mean other than automotive, which for Himax and I guess for the entire industry as well, I'm talking about display driver IC, Automotive, other than automotive, which is still strictly exclusively on eight inches. All others are either totally 12 inches or combination of eight plus 12 inches. Now with automotive, when we are moving to TDDI, in which we are the industry lead pioneer and leader at the moment, good momentum expected for the next few years.

TDDI automotive will be 12 inches as well. So now so if we and then eight inches for automotive, I mentioned earlier, eight inches is extremely tight, but because of our earlier engagement earlier both engineering and business preparations, we have been able to secure good capacity increase although it's eight inches which is super tight as we all understand. And for 12 inches, if you talk about for 12 inches for high mass and I guess for industry as well, for smartphone and tablet TDDI is all 12 inches, because it requires a lot of logic processes, right. And in certain cases memory as well. So you do need the 12 inches more advanced nodes.

For large panel though, it is a combination of eight inches and 12 inches. And large panel has to move to 12 inches primarily because of capacity constraint of eight inches, right. And that has started to take place a few years back. So it's not like industry is starting to do this because of this capacity constraint. A few years ago, the whole industry, Himans certainly is one of the pioneers has been moving very aggressively into 12 inches as a way to alleviate the capacity issue of eight inches for large display drivers.

So but then when we move to 12 inches, we typically represent the most mature process of 12 inches for large panel, right, for example. So we are talking about 110 nanometer as a mainstream as an example, while for smartphone tablet TDDI is now moving from 80 nanometer to 55 to 40 nanometer. Certainly there are technology reasons as well, but it's mainly to enlarge capacity. Now as we move into different new nodes, we are competing against a new set of other applications, right. So for example, AMOLED for smartphone is going to be the next big thing for display driver IC.

AMOLED now the mainstream mass production is 40 nanometer, but people us included are moving to 28. So with 28, we'll be competing with a different set of other applications, right. So I think it's kind of difficult to answer in the sense that we if 28 is extremely tight, which is not the case, I'm just saying as an example, if 28 is extremely tight, they will probably then move our product spectrum 40 a bit more or vice versa, right. If 40 is super tight, while 28 appears to have more accessible capacity, then people will move more aggressively into 28. Driver IC is a big consuming product, capacity consuming product for semiconductors.

So our move does make a difference in terms of the tightness level of different technology nodes. But our move is also reactionary, because when something is very tight, where they tend to move elsewhere, right. So I think it's but as far as I can see, I mean, even 28 right now is very, very tight. So you tell me which node is not tight, right. And people are talking about automotive MCUs for example, forty and fifty nanometer logic process.

They are so occupied, so occupied by automotive right now. And I don't blame I can't really blame them, but five gs people are they claim they are giving more priority to those applications. Know, 80 to 55, 40 and then 28, there's three little sign of loosening in capacity situation, I mean in my mind. But certainly, I mean, my response may change next quarter. I just have to watch the industry situation very closely.

But the benefit of our preparation is that we tend to have products crossing different boundaries, even different geometry, different technology nodes just to hedge our bets, right. So we will be able to move with certain degree of flexibility.

Speaker 6

Sure. Just a quick follow-up before I ask the second question. Are you able to quantify how much sales that we have right now is from eight inches and how much is from 12 inches?

Speaker 3

I don't have the number in front of me, but certainly 12 inches is much, much larger than eight inches right now. I mean, again, other than automotive, which is probably is still right now about 15% or less of our total revenue, although it's growing is outgrowing is probably outgrowing the rest. So that is totally age and certain portion of large panel and large panel represents large panel in total 30 plus percent of our total sales, right. And a portion of that is 12 inches and some other portion is 12 inches, eight inches. So eight inches is not relatively small for us.

And small panel, are almost exclusively 12 inches other than automotive, right? I'm talking about tablet and smartphone. And that is combined more than 50% of our sales already. And then you have timing controller and all others, they are all 12 inches as well.

Speaker 6

Okay, got it. And second question is on your auto warranty, Dispatcher Advisory business. As you mentioned about that, you have secured quite meaningful capacity already. I think from at this time point, I would say it's very impressive because last year, lots of automotive semiconductor companies that pushed out the capacity in the second half last year. So it looks like amazing decision at this time point.

So could you elaborate more on what kind of trend you are seeing on automotive display driver IC side as you just mentioned about it's migrating to TDDI? Or if you can give us more color on how structural the growth will be? Or like how much volume you will grow in every car in terms of the bigger screen size or even combination of different kind of display inside of the car? Thank you.

Speaker 3

Very good question. Firstly, indeed in the first half of last year, our customers are actually cutting back their orders and the forecast. And I remember we are roadshowing and we are going around telling everybody, you know, Tier one included even some end customers across Europe and U. S. That don't overdo that because guess what, you're going to be in such shortage that you're going to cure to capacity, So and in fact, during Q1 and Q2 last year, we actually although our customers are cutting back their forecast, we didn't really slow down in our inventory preparedness, because it was very obvious to us that it is going to run into better capacity shortage.

And it was also during that time that we started to engage our key foundry supplier for long term foundry arrangement. And that involves both new process developments and also porting of our of certain of our products from fab A to fab B to increase our visibility, you know, when the capacity is tight in individual fabs. And certainly also we enter into contractual arrangement to secure our capacity as well. So I think we are, thankfully we make those moves and now we can go around telling our even end customers that we are pretty well prepared, although we are still suffering from shortage, but I think our customers are very pleased to hear that we can actually enlarge our capacity quarter by quarter in a rather meaningful way, although way to next year. So I think that is very important at this stage for us.

And having said that though, Ah capacity is very tight and it is going to remain very tight. And I don't have the number exactly as far as the display driver IC content consumption per vehicle, how that trend is going to unfold. But I can share with you now is common industry understanding that agencies hope this be tight. So although we can secure more and also automotive unlike large panel or smartphone or tablet, which are more visible in terms of introducing new capacities when it's needed for automotive is notoriously hard as we all understand. So rather than fighting to get traditional discrete driver IC moving into 12 inches and having to deal with the barrier of qualification and so on, It's almost not worth it.

So we are encouraging our customers to speed up their TDDI adoption. And guess what TDDI is 12 inches and also the kind of capacity pool we are targeting for TDDI. Again, we have entered into sort of certain contractual arrangement with our foundry partners. The 12 inches TDDI are primary, for example, 80 to 55, which are basically occupied by smartphone and tablet, but they are all on track to migrate to forty and thirty eight as we all know, right. So and certainly our total demand for automotive for TDDI would not in terms of total amount is nothing compared to the demand for smartphone or tablet, right.

So I think, you know, will be pretty safe there in terms of 12 inches TDDI for automotive. So we are pretty well prepared for capacity over there as well. And so that is a big trend. I think a lot of customers and customers included agree with us. So I've seen the whole industry be mobilized to speed up the adoption and qualification for TDDI for automotive.

That is one thing. And second thing is the displays inside your cars are enlarging size with EV becoming more and more popular. The passenger room, the passenger space will be more roomy, right? And when it's more roomy, you know, do need screen for infotainment. And when it's so such large screen, typically you need your screen to be of the capability of free form, meaning it's not a stupid solid piece of flat glass, right.

So who is free form then in sale becomes a necessity in order to achieve a reasonable year production year rate for displays. And therefore we are actually again, we are the industry pioneer in terms of working with our panel makers, partners, selected partners in introducing hopefully very soon the world's first large display, very large display TDDI for automotive. And I think it's going to be a very important trend because again, when the display needs to be larger because your passenger room is larger. And when display is larger, then it needs to have free form and when free form is required, then you need to have need to have in cell display and for in cell display you need TDDI, but that requires a very special design as opposed to the ordinary small size display. So we are leading the industry in terms of developing that kind of PDDI.

So we are again, we are very happy with the progress. And again, because of all the reasons I mentioned, I think in all likelihood, this penetration of such dark screen display to automotives will also get speed up. So overall automotive I think is the most exciting business for us. We have an industry leader, we are leading technology and we are seeing the high growth potential. And we are now very deeply engaged with Tier one and end customers.

All these are very good signs for us in the long term. So thank you. Thank you, Donnie for

Speaker 6

the question. Thank you so much, Jordan. Congratulations again.

Speaker 3

Thank you.

Speaker 0

There are no further questions in queue. I will now hand the conference back over to Mr. Jordan Wu for closing remarks.

Speaker 3

As a final note, Eric Li, our Chief IR and PR Officer will maintain investor marketing activities and continue to attend investor conferences. So we will announce the details as they come about. Thank you and have a nice day.

Speaker 0

Ladies and gentlemen, thank you for participating. This concludes today's conference call. You may now disconnect.