Ichor - Earnings Call - Q4 2018
February 6, 2019
Transcript
Speaker 0
Good day, ladies and gentlemen, and welcome to the Ichor Systems Fourth Quarter twenty eighteen Earnings Conference Call. At this time, all participants are in a listen only mode. Later, we will conduct a question and answer session and instructions will be given at that time. As a reminder, today's program is being recorded. I would now like to introduce your host for today's conference, Claire McAdams, Investor Relations of Ichor.
Please go ahead.
Speaker 1
Thank you, Jonathan. Good afternoon, and thank you for joining today's conference call, which will be available for replay telephonically and on Ichor's Web site shortly after we conclude this afternoon. As you read our earnings press release and as you listen to this conference call, please recognize that both contain forward looking statements within the meaning of federal securities laws. These forward looking statements are subject to a number of risks and uncertainties, many of which are beyond our control and which could cause actual results to differ materially from such statements. These risks and uncertainties include those spelled out in our earnings press release, those described in our annual report on Form 10 ks for fiscal twenty seventeen on file with the SEC and those described in subsequent filings with the SEC.
You should consider all forward looking statements in light of those and other risks and uncertainties. Additionally, we will be providing certain non GAAP financial measures during this conference call, and our earnings press release contains a reconciliation of these non GAAP financial measures to their most comparable GAAP financial measures. On the call with me today are Ichor's Chairman and CEO, Tom Rohrs and our Chief Financial Officer, Jeff Andresen. Tom will begin with a review of the business, then Jeff will go over the fourth quarter and full year financials and our outlook for the 2019. After the prepared remarks, we will open the line for questions.
I'll now turn over the call to Tom Rohrs. Tom?
Speaker 2
Thank you, Claire, and welcome to our Q4 conference call. The fourth quarter was a challenging quarter for Ichor and for the industry. We saw demand and build plans that were lower than expected as
Speaker 0
our customers got very serious about correcting their inventory positions. This weakened demand environment resulted in our revenue and earnings coming in at the low end of our guidance for the quarter. Despite the softness in semi
Speaker 2
equipment, We we were able to generate $31,000,000 in free cash flow during the quarter. Looking at the full year, 2018 was Ichor's strongest year on record. Revenues of $824,000,000 increased 26% year over year. This reflects approximately 9% growth in our core markets of gas and chemical delivery, which outperformed the overall industry growth. But we also saw significant growth in our weldment and precision machining businesses.
We delivered on our objective to further increase our gross and operating margins year over year with new record set on both counts and delivered record earnings of about $3 per share. Over the last four years, we have delivered an annual growth rate of 35%, unmatched among our peers and customers in the industry. And we grew our earnings per share at an annual rate of 57%. In 2018, we had our strongest profits and cash flows on record. With net income of $75,000,000 we generated over $60,000,000 in operating cash flow.
And we also returned $90,000,000 to our shareholders through share buybacks. Probably the most important accomplishment during 2018 was that we exhibited strong profits and cash flows at business levels well below the peak spending environment seen in the first half of the year. I felt that we did an excellent job of adjusting to weakening business conditions as we executed a rightsizing plan in late June. We did the same in Q3 as we saw the fourth quarter demand drop. We were caught a bit off guard with the level of inventory corrections in the second half, but we have since implemented another round of rightsizing and now believe that we have the right balance of resources for the current level of business.
Our operating model is holding up well, thanks to our variable manufacturing cost structure and decisive action to manage expenses in response to changes in demand. We remain confident that we will continue to make solid profits during this multi quarter slowdown in industry spending, and we will be in a strong position to demonstrate both our financial and operational leverage as the industry recovers. Now, I want to spend some time discussing what we see in Q1. Our revenues for Q1 will be flat to down 7% from the fourth quarter, which shows we're holding up better than many of our peers and customer semiconductor businesses. We believe this is due in part to some of our market share gains starting to hit the scoreboard.
It also means that inventory correction, which primarily impacted our components businesses during the 2018 should be behind us by the time we exit Q1. We believe our gas and chemical delivery business is once again closely aligned with our customers' build plans. We are now positioned to be solidly profitable at today's business levels during this period, while ensuring that we can respond quickly when demand increases, which we currently expect to occur in the 2019. We will continue to have contingency plans in place for any additional softness we may experience, but I believe the brunt of the downward revisions are behind us as we bounce along the bottom. While there is good reason to remain cautious, we also have a number of tailwinds for a second half recovery that are worth noting.
These include our incremental market share gains, which will have an increasing contribution to our P and L as we move through the year as well as our exposure to ASML, which guided to a 50% increase in sales in the second half. In addition to these factors, we anticipate we could start to see a replenishment of inventories for our component businesses in preparation for improved demand for etch and deposition process tools. We are continuing to execute against our plans to gain incremental market share. As we entered the fourth quarter, industry analysts were anticipating about a 5% reduction in wafer fab equipment in 2019 and we sized our incremental revenue opportunity at about $100,000,000 Given that it's clearly evident at this point that the industry will see a much larger correction, which for process tools could be down as much as 20% this year. Our opportunity will probably be 20,000,000 to $25,000,000 less than what we thought a year ago or excuse me, a quarter ago.
Nevertheless, these market share gains remain a very significant growth driver for Ichor to once again outperform overall industry spending. There will be share gains in weldments, in precision machining, in chemical delivery and in gas delivery systems. I continue to be very pleased with the progress we are making against these organic opportunities. I will give you an update on this progress starting with the first meaningful incremental market share revenue kicking in during the first quarter. In our weldment business, we have been qualified on the first and second waves of parts with a new customer and are in process on a third.
These phases of qualification represent nearly half of what we are pursuing for the year. We have all of the capacity in place to support the opportunity as we have leveraged the capability that we acquired via our CalWeld acquisition. In our precision machining business, the qualifications have a slightly longer cycle time than what we are experiencing on the weldment side of the business. But we are nearing the completion of the first phase this quarter and we will see the first revenues in Q2. In our gas delivery business, we are often asked by investors whether customers will move from an outsourced manufacturing strategy to an in source strategy during these downturn periods.
We are seeing quite the opposite as we are awarded incremental share at one of our largest customers in the fourth quarter with the first revenues beginning now in the first quarter. We will also see growth in gas delivery systems for our third largest customer in 2019 as their products ramp. In our Chemical and Liquid Delivery business, we have gained incremental share outside of our proprietary liquid delivery module. This revenue also will begin in late Q1. The largest growth driver, however, will still be our proprietary liquid delivery module.
Sales there are still very limited today. However, the end users technology transition is progressing very well and we expect to see meaningful levels of LDM revenues in the second half. Our E and Engineering acquisition gave us a foothold in Korea where there is roughly a $2,000,000,000 equipment market. The business is expected to continue to be negatively impacted by the low levels of memory investment. But once this recovers, we will see share gains in gas delivery there.
Our equipment excuse me, our engagement with our largest customer in Korea on the liquid delivery module though is continuing and we plan to be able to demonstrate the product this year leading to another leg of growth in Korea. As you can see, we are making solid progress on our incremental revenue initiatives. While market conditions have muted the 2019 opportunity, the total opportunity is significant and will exceed $100,000,000 once industry returns to higher levels of WFE spending. I'll continue to update you on our progress each quarter. To sum up, in Q4, in addition to delivering strong cash flows and profits in spite of weakening business conditions, we also made great progress in addressing the needs of our customers and we're beginning to fill our promise of market share gains.
As we enter 2019, our strategy is unchanged. We are a semiconductor equipment company concentrating on fluid delivery technologies. We believe that through the cycle semiconductor equipment will continue to grow faster than most other industrial businesses. As I mentioned at the beginning of my prepared remarks, over the last four years, we have outperformed the wafer fab equipment 12% annual growth rate with our own annual growth rate of 35%. We fully expect that as we execute on our opportunities for share gains, we will continue to grow faster than the WFE market.
I am confident that Ichor will emerge from this period as a stronger company with significant operating and earnings leverage. And now, let me turn this over to Jeff to provide more detail around our fourth quarter financial performance and our guidance for the first quarter. Jeff?
Speaker 3
Thank you, Tom. Before I begin my comments, I'd like to remind you that the P and L metrics discussed today are non GAAP measures unless I identify the measure as GAAP based. These measures exclude the impact of share based compensation expense, amortization of acquired intangible assets, nonrecurring charges and discrete tax items and adjustments. I'd also like to note that a schedule which summarizes GAAP and non GAAP financial results discussed on this conference call as well as key balance sheet and cash flow metrics and revenue by geographic region can be found on the Investors section of our website. Fourth quarter revenues of $141,000,000 were down 19% from the third quarter and down 23% from the 2017.
Our Q4 gross margin of 15.3% declined from the third quarter due primarily to the lower level of factory absorption as a result of the lower revenue volumes and product mix. Operating expenses of $11,100,000 declined slightly from the third quarter as we continue to tightly manage our expenses. Operating margin of 7.5% represented only a two thirty basis points decrease from the prior quarter on a nearly 20% decline in revenue. Our interest expense in the fourth quarter was $2,600,000 Our tax rate for the quarter was 10%. The lower tax rate is primarily a result of changes in the geographic mix of profits.
Q4 net income of $7,300,000 was equal to 5.1% of revenue. Earnings per share was $0.32 Now I'll review the full year 2018 financial results. Our revenues were a record $824,000,000 up 26% year over year. Gross margin of 17.2% increased 80 basis points from 16.4% in 2017. Operating expenses increased 29% as compared to 2017 as we added the full impact of three acquisitions made in late twenty seventeen and early twenty eighteen.
Operating margin for the full year 2018 was 11.3%, a 60 basis points increase from 2017 with operating profit increasing to a record $93,500,000 up 33% from 2017. And lastly, our earnings were a record $2.99 per share, up 21% from 2017 earnings per share of $2.48 reflecting an increased tax rate of 10.4% versus 2.8% in 2017. Now I'll turn to the balance sheet. Cash of $43,800,000 increased $10,800,000 from the third quarter with our net debt position decreasing $1,000,000 in the quarter. The company generated $30,600,000 in free cash flow in the fourth quarter after $2,500,000 in capital purchases.
During the fourth quarter, the company repurchased $30,000,000
Speaker 4
of
Speaker 3
stock for approximately 1,700,000.0 shares, bringing the total amount repurchased during the year to $90,000,000 In the first quarter to date, we purchased an additional $1,600,000 bringing the total buyback since inception to $91,400,000 out of the total $100,000,000 authorized. This total reflects 4,400,000.0 shares repurchased at an average price of $20.64 per share. We will continue to review our capital allocation options, making the investments needed to ensure that we develop the products and put the capacity in place to support our growth objectives that Tom discussed earlier, while balancing this with our projected cash flow generation and prudent management of our debt level. Day sales outstanding improved to twenty six days from thirty four days in the third quarter. Inventory decreased to $121,000,000 down 9% from the third quarter.
Now I'll turn to our first quarter guidance. Our forecast is for revenues in the range of $131,000,000 to $141,000,000 Our revenue guidance of flat to down 7%, as Tom said, is better than the majority of what our peers in the semiconductor equipment supply chain are guiding in part due to our market share gains starting to kick in this quarter. In early Q1, we made the decision to implement additional cost reductions across the organization. Once again, our goal was to balance the responsiveness requirements of our customers with delivering sound financial results while ensuring we execute on our market share growth opportunities. The Q1 operating expenses will include a modest increase related to some seasonal increases such as payroll taxes and audit and legal fees, which will normalize in the second quarter.
We expect interest expense of $2,700,000 a tax rate of 12% and a lower fully diluted share count of approximately 22,500,000.0 weighted average shares outstanding for the first quarter. Given these assumptions, we expect our earnings per share in Q1 will be in the range of $0.23 to $0.31 Operator, we're ready to take questions. Please open the line.
Speaker 0
Our first question comes from the line of Patrick Ho from Stifel. Your question please.
Speaker 4
Thank you very much. Tom, maybe first off, in a lot of downturns, companies like yourself see an increase in design activities as customers and OEM equipment vendors actually have more time to spend on that. One, are you seeing it? And secondly, are you seeing any leverage from broader offering portfolio today where you're getting interest or potential demand from customers that or companies that aren't currently on your customer base today? So yes,
Speaker 2
in terms of your first question, we've commented on this. And Patrick, you're absolutely right. During a downturn, our customers have time not only to ask us to help them with new designs, but even maybe more importantly to qualify parts systems that have to go through rigorous qualification process to fit, copy, exact standards of the industry, etcetera. And so we are seeing that. We're seeing it I refer to areas where we're seeing it with the ability to get qualifications done at a pace that is in fact quite rapid.
And also, we're working on a number of different design opportunities with our customers on both the gas and liquid sides of the business that I really can't specify at this point. But those things absolutely are happening. We are seeing interest from what I would call customers other than our big four. A lot of this is specifically around gas delivery systems. I mentioned one in Korea during my comments, where we've been working with them very closely.
And as we work with them, we'll have a product ready probably towards the end of this year. So we're happy to report that all of those kinds of activities are happening. And that's one of the things that lead us to be quite bullish about our ability to continue to gain share.
Speaker 4
Great. That's helpful, Tom. Maybe as a follow-up question for Jeff, it's really encouraging to see you continue to use the cash for stock buybacks at current prices. How do you look on a going forward basis balancing that between potentially paying off some debt, reducing interest expense or some of the investments that still need to be made into the company?
Speaker 3
Well, I think as you've seen is that our and number two is we continue to invest in some R and D, so we can continue to develop products and work with our customers. Two is we will continue to make sure we put the capital in place for capacity, much of which we increased significantly already in 2018. And then we will look at the remaining capital allocation strategies of either a buyback or paying down debt in lieu of what we see on the horizon. And I think we're going to take a very prudent approach to it. Obviously, we've said this on prior calls that we discuss this routinely with the Board and that we'll look at what we see coming forward in light of our debt levels and any opportunities we might see in the M and A world.
And so I think we've proven to be pretty prudent so far and we'll continue to do that.
Speaker 4
Great. Thank you very much guys.
Speaker 2
Thanks Patrick.
Speaker 0
Thank you. Our next question comes from the line of Sidney Ho from Deutsche Bank. Your question please.
Speaker 5
Thanks. Thanks for taking my question. So Tom last quarter you said inventory at your large customers are at very low level at least on the gas delivery side, the component side. And I think you said similar things in your prepared remarks today.
Speaker 6
Can you
Speaker 5
give us some additional color perhaps tied to some of the comments you made in terms of shipment rates, what you've seen so far this quarter versus last quarter? And for smaller companies that are outside of the top two, do you have a better feel about those smaller companies where the inventory is still an issue for them?
Speaker 2
Well, as I was saying, we saw quite a bit and more on the component side, the weldment side, the precision machining side in terms of inventories being lowered at our suppliers and therefore somewhat lower shipments on coming out of our factory. It's quite hard to articulate in terms of exactly how much is left. However, at this point, I think Lam in particular, which is already announced, did a terrific job of lowering their inventories last quarter. They lowered them about $145,000,000 or so. And if you do a translation, that translates into literally about over a quarter, maybe $250,000,000 of tools.
So you got $250,000,000 tools coming out that normally we would have shipped the parts for it. It's a big reduction. And with that, I believe that for the component sides, we're seeing some continued reductions in inventories. However, it's coming much more in line. And we can track that by looking at what our normal rate of inventory or for that matter shipments are between components and say gas panels.
And it appears that that's coming back in sync for us. So we're rather optimistic that by the end of this quarter, those inventory corrections could be pretty much completed. And of course, if we see a little bit of an upturn, then we know that typically they'll rebuild some inventories, although that might not be the best overall management practice that they may well do that again and then we'd be the beneficiaries. So, we have a little more to go in terms of inventory corrections, but we're we believe we're a long way towards being out of the woods. In terms of smaller players, it's actually a little bit worse, typically because they don't quite have the same degree of management systems in place and they tend to cover for the lack of great information flows through their management systems with buffers of inventories.
So, won't mention a customer, but we have seen one where the build ups, let me just say, we're substantially higher than the build ups were at Lam or Applied etcetera.
Speaker 5
Okay. That's helpful. Also appreciate the details of the incremental revenue opportunity you talked about earlier. But what is your expectations in terms of the linearity of those incremental revenue, which is now 20,000,025 million dollars lower than you expected? That be back end loaded?
Or is it more evenly spread? I think you have you talked about different components of that.
Speaker 2
Yes. I think it'll be relatively it'll be a ramp, which means by definition it will be second half loaded. We are seeing revenue this quarter. It's pretty easy for us to calculate, although we won't be revealing that number. And we'll see that increase again in Q2 and then increase again in Q3 and then increase again in Q4.
So we will be somewhat back end loaded in that for sure. And then we'll also benefit in the back half of the year through the activities at ASML. They've had an announcement saying they were actually going to be down some actually quite a bit in this first quarter. And then they see a very robust second half, is as you know, Sidney, the ideas of the second half are quite scattered at this point. ASML for one thing, it'll be pretty robust for them and we'll benefit from that as well.
So we have those two tailwinds going into the second half that we're quite pleased about.
Speaker 5
That's great. Maybe just squeeze in one last one. Not to put words in your mouth, but clearly we probably shouldn't expect first half twenty nineteen to be better than the 2018 like you said last quarter.
Speaker 0
You put words in my mouth on
Speaker 2
the answer, we should not expect that.
Speaker 5
Do you expect second quarter you'll see another revenue decline before start climbing in the second half?
Speaker 2
Well, we're not going to guide the second quarter right now, Sidney. I think I referred to kind of bouncing along the bottom at this point. And I think maybe that's as far as we'll go with it.
Speaker 5
Okay. Thank you very much.
Speaker 2
Yes. Thank you.
Speaker 0
Thank you. Our next question comes from the line of Quinn Bolton from Needham and Company. Your question please.
Speaker 7
And Jeff Jones. Wanted to follow-up on Sidney's question there about sort of thoughts about revenue going on beyond the first quarter. I know you're not guiding to the second quarter, but when I listen to your comments about the inventory correction should be mostly over in Q1, it would feel at that point you probably start to ship more in line with consumption and you're clearly under shipping consumption in the first quarter. When I think about incremental share gains, where the share gains increase each quarter, it feels like everything I hear Q2 could be up. What's wrong with that thinking?
Speaker 2
Well, first of all, I mean, if you we guided flat to down 7%. I think, if I recall correctly, Lam guided their first quarter down around 4% or 5%. And so if you average hours out to 4%, we're kind of right in sync with their build plans today. So I don't think we're under shipping consumption by very much this quarter. We'll have to wait and see what Applied Materials announces in a couple of weeks.
So I would say that. And having said that, that would, to some degree, coincide with a slowing down of some of the inventory corrections. So we'll see how that plays out and hopefully it plays out as I said, where the corrections would be in essence kind of behind us by the end of this quarter and maybe even sooner than that. Having said all of that, we're still cautious because haven't seen the signs of spring yet. We haven't seen the normal things people follow like a change or a transition in pricing for DRAMs where you see an uptick or two along the way and then we'll all start getting really excited.
So I think we'll kind of wait for some of those signals before getting too far ahead of ourselves on what will happen in Q2.
Speaker 7
Okay, got you. So it doesn't sound like you think you're under shipping consumption here in
Speaker 2
the first quarter by any significant amount. From what I've seen out of announcements from ASML and Lam, I do not think we're under shipping by a huge amount.
Speaker 7
Okay. That's helpful. And then you'd mentioned the liquid modules ramping in the second half. Is that so with the lead customer? Or, how are you seeing that business develop beyond the lead customer?
Speaker 2
Well, we've seen we've been tied at the hip with the lead customer who we thought was a wonderful customer to be tied to the hip too. And as it turned out, it was kind of a major disappointment for all of us last year and we just went through the results for last year. It was a terrific year, but the one disappointment was that the LDM product didn't get off the blocks as we hoped it would. But I think we're all hearing much better news from that customer and what they're doing with their technology and what they're doing in their plans. They've had their earnings announcement.
They've voiced some optimism about that. And so I share that optimism for the second half of this year with that LDM product. Having said that, I also referred to the fact that we are in the process now of moving it to other customers. I mentioned one in Korea that has a very significant place in the clean business. We're working closely with them right now.
We'll have products working in their labs through the second, third quarter and that will start to result in shipments as it moves along. So and that's just one of the people we're working with. So yes, this is not a unique product to one customer. This will be a product that over time will be used not only in applications like CMP, but also in applications like cleaning and maybe track and will open up whole new world of customers and opportunities for us.
Speaker 7
Great. Appreciate your thoughts.
Speaker 2
Thank you.
Speaker 0
Thank you. Our next question comes from the line of Karl Ackerman from Cowen and Company. Your question please.
Speaker 8
Hi gentlemen. Jeff, I have a question for you. Looking at your gross margin assumptions for March, well for December, then also for March, how significant is factory utilization playing into that guide versus product mix? And I guess at this juncture, would you consider it too premature to consolidate manufacturing sites you've acquired through M and A the last two years? I guess any color on how you think about optimizing your fixed costs would be helpful even as you drive toward that $75,000,000 of incremental design wins this year.
Speaker 3
Yes, good question. So I think as if you took the color and you ran it, you probably know that at the high end, our gross margin is fairly similar. I'd say the fixed cost has been is probably versus maybe the third quarter, the biggest change that's negatively affected the gross margin. Product mix will affect it a little bit, but not as much as we're seeing in the fixed cost. Having said that, we always look to drive efficiencies.
So I would not say anything is off the table as we look at our facilities across the board. There are some potential opportunities to do some additional integration either in the businesses and or in the facility. So we will constantly look at that as well and work on that. And we're also we had a lot of capacity last year. We probably didn't add as much as we thought as we were coming into the year.
We modulated some of that back. So we've right sized some of that as well.
Speaker 2
One of points, Karl, I think is important here is that as we talk about these market share wins in this $75,000,000 that will be hitting the top line with very, very, very little incremental fixed cost along with it. Most of the capacity, as Jeff just said, is actually in place. There'll be a few more things to do. But beyond that, on the OpEx line, there'll be very, very, very little hiring, if you will, or increases in OpEx to support that extra bulk of dollars. And so the leverage that like to see through those fixed costs, I think will become very visible through the year.
And obviously, when we're bolting on that much more money with very, very little more in the way of fixed cost, will be apparent to everyone.
Speaker 8
That's helpful. I appreciate the color. Tom or Jeff, last quarter you mentioned that in the event of a multi quarter downturn, your customers may actually accelerate outsourcing in order to reduce their own fixed cost. It seems this outsourcing opportunity is in fact accelerating, given your prepared remarks on kind of weldments in the liquid delivery module. I guess I'm curious if there are any other opportunities you see, I mean those are significant in and of themselves, but I'm curious if you if there are any other opportunities you see to drive content gains in the 2019 in other areas of your business?
Speaker 2
There are. And we've occasionally spoken of them. A lot of our opportunities are really in terms of penetrating new geographies. We've been talk we talked about Korea. We do have quite a bit of activity right now in terms of developing ways where we can penetrate Japan.
And next to The U. S, Japan has more semiconductor capital equipment companies than anywhere else between Tokyo Electron, Dineupon Screen, Ebara and others billions and billions and billions of dollars of semiconductor capital equipment is built in Japan. And that's not lost on us. And so we have some what we consider to be excellent plans in place. We review them regularly with the board.
We're at a point where we're kind of almost ready to think about speaking about them more broadly. But for now, you can know that there is some big fish to fry out there and we're looking at it very, very closely and we think we have some ways and means to get at that once again without adding a huge amount of fixed cost to our balance sheet.
Speaker 8
Very helpful. Thank you.
Speaker 2
You're welcome. Thank you.
Speaker 0
Our next question comes from the line of David Dudley from Steelhead Securities. Your question please.
Speaker 6
Yes. Thanks for taking my question. I guess first question kind of from a macro perspective. Guys, sort of wafer fab equipment estimate are you signing up for now for 2019?
Speaker 2
So, we've heard again, take a lot of our cues from our customers, which only makes sense. And we see them at the point now where, say, a couple of them are guiding down in the reasonably high teens. So we're saying a wafer fab equipment number of about 42 seems to make a great deal of sense. It may be as low as 40 right now. But that's the number where we're focusing in on in our planning and what we're thinking.
And one of the reasons why we think there may be some incremental business besides the ones I talked about including ASML is that, we think we're operating at a level now that's more akin to the high 30s instead of the low 40s. And just by mathematics in terms of if we're going to get to that 41%, 42% number, the second half of the year is certainly going to have to be higher than the mid-30s and actually higher into the mid range of the 40 So that's how we're getting our Qs and that's what we believe that's we're planning around. It needs to be at least said with the caveat that over the last two months that number has moved down kind of in a Chinese water torture of drip, drip, drip from about 50 down to about 48, 47, 46 now to where it's 41, 42. And so I there are no rules that say it couldn't actually end up being lower than that at some point. But those are the numbers we work with right now.
Speaker 6
Okay. And so kind of math for the year might be, since you feed to those large OEMs, that business might be down that high teens level and then you might add this 75,000,000 or $80,000,000 that you're referring to and that kind of is a good estimate for the best guess we could get for the year?
Speaker 2
Well, it's an estimate, but you have to be careful when you look at the large OEMs being down 18%, 19%, because the large OEMs have a very nice chunk of their business called service. And that service business tends to be rather flat or maybe even up a little bit. And so if they're going to tell you that their entire business is down 18% or 19%, that means their equipment business is going to be down 20% or more because their service business is going to be relatively flat. So you got to be a little careful with how you discern those numbers.
Speaker 6
Okay. That's a great point. On to the next topic. You talked about this incremental revenue, I think now being sized at 75,000,000 or $80,000,000 and that doesn't have a lot of fixed costs attached to it. When you is there a way you might describe what the drop rate might be used for the gross margin line or the operating line with that incremental revenue?
Or how should we try to think about the profitability of that new revenue?
Speaker 3
Yes. I think that we've talked about this in the past, Dave. But to reiterate, virtually, when Tom talked about weldments, precision machining, liquid delivery module, all of those will be accretive to our margin. Those margins are higher than the margins you're seeing today. And so think of the weldments as a gross margin, say in the low 20s to the mid 20s, precision machining is probably in the low 30s, LDM is probably a little more like weldments.
So the incremental margins will be slightly higher than that.
Speaker 6
Okay. And then I guess the final thing from you, just couple of clarifications. Could you just let us know what the size of the 10% customers were in the quarter? And then going forward for the annually, what should we expect the share count to do?
Speaker 3
So one is we don't we'll disclose the final revenue sizing by customer in the case. So I won't do that on the call. Share count, I think what in Q1, it will be 22.5. Obviously, in a flat share price, we don't really see that moving up hardly at all. It might tick down a little bit if we finish the buyback, but I can't make a comment on that.
So I wouldn't I would for simplicity, I'd probably just use those numbers for the year.
Speaker 6
Okay. And then I might have wrote this down. When you were talking about the drop rate of those three businesses, you said that one was low 20s, one was low 30s. Could you just clarify which was which again?
Speaker 3
Weldments was the low 20s and the precision machining will be the low 30s.
Speaker 6
Thank you very much.
Speaker 0
Thank you. This does conclude the question and answer session of today's program. I'd like to hand the program back to Tom Rohrs for any further remarks.
Speaker 2
Thank you very much for joining us on our call this quarter and we all look forward to updating you on our Q1 call in May. Thank you.
Speaker 0
Thank you, ladies and gentlemen, for your participation in today's conference. This does conclude the program. You may now disconnect. Good day.