Mercer International - Q4 2025
February 13, 2026
Transcript
Operator (participant)
Good morning, and welcome to Mercer International's Q4 2025 earnings conference call. On the call today is Juan Carlos Bueno, President and Chief Executive Officer of Mercer International, and Richard Short, CFO and Secretary. I will now hand the call over to Richard Short.
Richard Short (CFO and Secretary)
Thanks, Shannon. Good morning, everyone. Thanks for joining us today. I will begin by touching on the financial and operating highlights of the Q4 before turning the call to Juan Carlos to provide further color into the markets, our operations, and our strategic initiatives. Also, for those of you that have joined today's call by telephone, there is presentation material that we have attached to the investor section of our website. But before turning to our results, I would like to remind you that we will make forward-looking statements in this morning's conference call. According to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995, I'd like to call your attention to the risks related to these statements, which are more fully described in our press release and in the company's filings with the Securities and Exchange Commission.
Our operating EBITDA for the Q4 was negative $20 million, up $8 million when compared to the Q3's results. This change in performance was largely due to stable production across all our mills and the benefits of our One Goal 100 program. However, market headwinds, including pricing, weak demand, and elevated fiber costs in both Germany and Canada, continued to weigh on our overall results. The current quarter's EBITDA also includes a non-cash inventory impairment of $23 million. In the Q4, we recognized total non-cash impairment charges against our long-lived assets of $260 million, or $3.22 per share. $204 million of this was against the assets of the Peace River Mill, a requirement under U.S. GAAP that reflects the ongoing weakness in the hardwood pulp market.
We also recorded a $12 million impairment in our solid wood segment related to the sale of obsolete equipment. Given the challenging hardwood pulp market conditions, there are a number of strategic initiatives underway with the goal of returning the Peace River mill to profitability. These include expanding softwood pulp production, exploring government support for incremental energy generation, and a carbon capture project. Unfortunately, U.S. GAAP does not allow for the inclusion of these initiatives in the impairment assessment. Juan Carlos will provide more detail on these initiatives shortly. Our pulp and solid wood segments both reported negative quarterly EBITDA of $11 million in the Q4. Additional segment disclosures are available in our Form 10-K, which can be found on our website and that of the SEC. In the Q4, NBSK markets weakened due to the sustained uncertainty of the global economy.
As a result, our softwood sales realizations decreased to $702 per ton, down from $728 per ton in the Q3. The NBSK net price in China saw a small decline to $671 per ton, a $19 decrease from the Q3. We observed a more significant drop in the North American NBSK list price, which averaged $1,568 per ton in the Q4, a reduction of about $132 from the Q3. The European NBSK list price remained stable at an average of $1,498 per ton. Hardwood markets in China showed improvement in the Q4, largely due to stronger demand and increased domestic fiber costs. Meanwhile, demand and pricing in North America remained steady.
Overall, our hardwood sales realizations were flat at $528 per ton compared to the Q3. The average price gap in China between softwood and hardwood pulp narrowed by $56 per ton this quarter to approximately $130 per ton. The average net price for eucalyptus hardwood in the Q4 was $540 per ton, which is an increase of $37 from the Q3. In North America, the average list price was flat compared to the Q3 at $1,198 per ton. As mentioned previously, the Q4 included a $23 million non-cash inventory impairment, primarily driven by low pulp prices and high fiber costs. Of this amount, approximately $15 million was attributed to softwood inventories, and the remainder was against hardwood inventories.
Pulp sales volumes in the Q4 increased by 20,000 tons to 472,000 tons. Pulp production remains relatively stable in the Q4 at 460,000 tons. However, if we adjust for planned downtime, our production volume improved by about 20,000 tons. We had a total of 21 days of planned maintenance at our Stendal mill in the Q4, which reduced production by 42,000 tons compared to the Q3, when we had a total of 20 days of planned downtime at the Celgar and Rosenthal mills, which reduced production by about 21,000 tons. In the first half of 2026, we do not have any planned maintenance downtime. In Q3, Rosenthal will be down for 14 days, and Peace River will be down for about 10 days. In Q4, Celgar will be down for 20 days.
Overall, we expect to see almost 50 days less planned maintenance downtime compared to 2025. Our solid wood segment, lumber pricing—Sorry, for our solid wood segment, lumber pricing in the Q4 modestly decreased compared to the Q3 in the U.S., as weak demand was only partially offset by reduced supply. In Europe, pricing was stable in the Q4 compared to Q3. the Random Lengths U.S. benchmark price for Western SPF number two and better averaged $422 per 1,000 board feet in the Q4, a decrease from $477 per 1,000 board feet in the Q3. Today, that benchmark price for Western SPF number two and better is around $448 per 1,000 board feet, a $46 increase from the end of 2025.
In the Q4, lumber production decreased by about 6% to 109 million board feet from the Q3. This was primarily due to reduced sawlog availability and reduced production during the holiday season. Similarly, lumber sales volumes decreased to 103 million board feet, a drop of about 7% from the Q3, which mirrored the lower production. Electricity sales in the Q4 totaled 202 gigawatt hours, and pricing was about $105 per megawatt hour, which is about the same as the Q3. Fiber costs for both our pulp and solid wood segments were relatively steady in the Q4 compared to Q3. In the Q1 of 2026, we are expecting fiber costs to increase in both Canada and Germany, caused by supply constraints resulting from reduced sawmilling activity.
In addition, Germany will also be impacted by seasonal demand for fiber from the biofuel industry. Our mass timber operations within the solid wood segment had modestly higher revenues in the Q4 compared to the previous quarter. In Q4, the elevated interest rates in the U.S. continued to be a drag on overall market momentum. However, our mass timber business has developed a healthy order book. Today, the order book totals about $163 million, which compares nicely to our order book of approximately $80 million at the end of Q3. We currently expect our 2026 mass timber revenue to be about $120 million. We continue to make progress on our One Goal 100 program.
As a reminder, this initiative focuses on cost reduction and operational efficiencies, with a target to improve our profitability by $100 million by the end of 2026, using 2024 as a baseline. We realized approximately $30 million in cost savings and reliability improvements in 2025. In the Q4, our aggregate liquidity improved by over $54 million to $430 million, comprised of about $187 million of cash and $243 million of undrawn revolvers. This improvement in our liquidity was the direct result of our working capital management and cost reduction activities. In the Q4, we invested a total of $14 million of maintenance capital across our facilities.
We reported a consolidated net loss of $309 million for the Q4, or $4.61 per share, which includes the non-cash, long-lived asset and inventory impairments, which aggregate to roughly $239 million, or $3.57 per share. In the Q3, we reported a net loss of $81 million or $1.21 per share. That ends my overview of the financial results. I'll now turn the call over to Juan Carlos.
Juan Carlos Bueno (President and CEO)
Thanks, Rich. Our operating results continued to be undermined by significant market headwinds. The ongoing downcycle conditions forced us to recognize non-cash asset impairments, including a write-down of our Peace River Mill's fixed assets. And while these non-cash impairments will understandably dominate headline results, the fact is that underlying operational performance improved quarter-over-quarter. Cost reductions, efficiency improvements, and working capital reductions contributed to the $54 million improvement in our liquidity, and we remain focused on improving the controllable drivers of performance. This focus is highlighted through our One Goal 100 program. Launched in Q2, it has yielded about $30 million of concrete results for the full year, and we're on track to achieve our goal of $100 million in improvements by the end of 2026 when compared to our 2024 baseline.
As Rich mentioned, the non-cash impairment of our Peace River Mill was the result of us being subject to U.S. GAAP rules. Unfortunately, these rules do not allow us to take into account two very important projects that our team has been working on for a couple of years already: our carbon capture project and the expansion of the mill's bioenergy output with support of the government, projects that will be transformative for the mill. Previously, we had announced our plans to install a carbon capture demonstration unit at our Peace River Mill in the Q4 as part of a joint development project with Svante Technologies. I am pleased to report that the pilot plant is operating, and the results so far are very encouraging, both in terms of the efficiency as well as purity of the CO2 being captured.
The results of the six-month testing period of this demonstration unit will be instrumental in our decision-making process for future phases of this project. This venture is not only important for the Peace River Mill, but will be one of the steps in our journey to transform our pulp mills into biorefineries with multiple sustainable revenue streams. Now, turning to the overall business environment, the trade war headwinds have created an unprecedented level of market uncertainty that persists even though current tariffs appear to be stable for now. We're expecting further tariff uncertainty as CUSMA is to be renegotiated in June this year. The majority of the trade-related impacts we have faced are due to the indirect impacts of tariffs and trade uncertainty. As it stands today, the only tariff barrier we're facing is a 10% tariff on our European lumber imports into the U.S....
This does, however, compare favorably to Canadian imports, which today face an average combined tariff and duty rate of approximately 50%, varying by company. As a result, we have already seen Canadian lumber curtailment announcements and expect more to come. This is creating a reduced supply of residual chips for pulp mills and is putting pressure on fiber costs. We feel our Celgar mill is well-positioned, given its ability to access the U.S. fiber market and our ability to harvest and process whole logs. Nonetheless, we're experiencing some fiber cost inflation as expected. As mentioned, our main import from the U.S. into Canada is wood chips for our Celgar pulp mill, which today amounts to about 45% of the fiber consumption of the mill. We feel this is a competitive advantage for us, and we have the ability to grow this percentage going forward, if required.
Most importantly, there are no counter tariffs applied to this fiber. Our EBITDA of -$20 million reflects 21 days of planned maintenance downtime at our Stendal mill, low prices in most of our markets, and high fiber costs. Overall, NBSK pulp markets weakened in the Q4, including in North America, reflecting the indirect effects of the evolving tariff environment. Specifically, North American fluff pulp, previously shipped to China, primarily for diaper applications, is now subject to a 10% tariff. Consequently, Chinese manufacturers are pivoting to other products, and displaced North American fluff pulp is now being redirected into paper applications, adding supply pressure and weighing on the North American market. Chinese NBSK prices were also under pressure as weak paper prices pushed certain producers to opportunistically substitute and run their machines more slowly. Meanwhile, European NBSK prices were relatively stable.
Now turning to hardwood, prices in China increased in the Q4, driven by improving demand and higher domestic fiber costs. Meanwhile, in North America, hardwood prices were flat. Looking ahead, we expect to see some modest NBSK and NBHK price improvements in Q1 in both Europe and China, while North America is expected to be stable. However, trade uncertainty continues to be an overhang on this business, and until trade restrictions are reduced, the supply-demand dynamic will be heavily influenced by the supply side. In total, our pulp production was flat at 460,000 tons compared to Q3. This result reflects an overall production improvement, given that we lost roughly 42,000 tons due to Stendal's Q4 plant maintenance shut, compared to only 21,000 tons of planned downtime in Q3.
Our lumber production was down about 6% relative to Q3, due to reduced production during the holiday season and the availability of sawlogs. Overall, we're pleased with our lumber production. Pulp fiber costs were essentially flat relatively to Q3. In Canada, our wood costs didn't change, but in Germany, the increased demand for pulp logs and sawmill residuals and lower supply of sawlogs pushed fiber prices up slightly for both our pulp and sawmills. Looking ahead to Q1, we expect fiber costs to increase meaningfully for both our pulp and sawmill businesses. Our pulp business will be impacted by reduced sawmill residual availability, and our German pulp mills will also face increased seasonal competition for wood chips from biofuel producers and reduce sawmill chip supply.
In Germany, we expect harvesting levels to improve as the lumber market improves, while in Canada, lower fiber availability will keep price pressure on fiber unless the demand side of the equation changes. The business environment for solid wood segment was consistent with Q3. It continues to be held back by a weak European economy and the impact of high mortgage rates, with seasonal construction slowdown in Q4, creating modestly weaker pricing in the U.S. lumber market. The stagnation of the European economy continues to dampen the demand for pallets, and the result of this very adverse business environment is the main reason behind the $11 million EBITDA loss of our solid wood segment in Q4. Given the many economic forces affecting U.S. construction activity, U.S. lumber pricing could be volatile in the short term, while demand is expected to remain weak in Q1.
In contrast, we expect modest upward pricing pressure in the European market, primarily due to increasing sawlog prices. Any meaningful long-term improvement in either the European or U.S. markets remains dependent on improved economic conditions and lower long-term interest rates. Our flexible sawmill production capabilities enable us to be competitive in all lumber markets. We intend to continue to maintain a strong presence in Europe and the U.S. while serving the quality-sensitive Japanese market. In Q4, 41% of our lumber volume was sold in the U.S. Looking forward, we believe the U.S. lumber market will be driven by favorable homeowners demographics. This, combined with reduced North American lumber capacity, will create a supportive supply-demand dynamic in the mid-term.
European shipping pallets markets remain weak, with pricing staying generally flat due to the overhang of the European economy, particularly in Germany, and we're expecting generally stable pricing in the first half of 2026. Biofuels were up almost 10% relative to Q3 due to seasonal demand, and the prices may still increase slightly. With regards to our mass timber business, revenues were up roughly 6% compared to Q3. We continue to see a steady volume of incoming project inquiries in terms of both number and total dollar value of projects. As a reminder, the projects we're bidding on and winning today are meant to be constructed in average about 9 months from now or well into 2026. We expect 2026 revenues to be more than double what we had in 2025 or above $120 million.
As a result, we will begin ramping our Conway facility to two shifts in early Q2, and expect to do the same at Spokane in late in the year. Today, our mass timber backlog of projects sits at about $163 million, practically twice of where we were at the end of Q3. It is clear that a large portion of the growing interest in mass timber is coming from data center hyperscalers. The appeal to this group is the speed of construction, which can be about a third shorter than traditional construction methods, as well as the carbon sequestration benefits that only mass timber brings. More importantly, to Mercer, is that our industry-leading North American capacity leaves us well positioned to meet this growing demand.
As a result, we're confident in this business being a growth engine for Mercer in the short term. We have roughly 30% of North American cross-laminated timber production capacity, a broad range of product offerings, including design-assist and installation services, and a large geographic footprint with manufacturing sites in the Northwest as well as the Southeast, giving us competitive access to the entire North American market. In closing, market weakness is expected to persist in 2026, and, as a result, our priority is on maintaining strong liquidity. To do this, our strategy includes further cost reductions, lower capital expenditures, and other working capital measures, along with a commitment to rebalance our portfolio of assets that combined will improve our balance sheet. Above all, we're committed to prudent financial management.
In light of the ongoing economic uncertainties and our focus on liquidity, our planned CapEx spend is about $60 million-$80 million in 2026, and this capital budget is focused on maintenance, environmental, and safety projects. The headwinds facing our industry have proven to be both longer and more severe than many anticipated. However, our experienced management team has navigated through previous commodity downturns, and I'm confident that our short-term strategy will allow us to weather this storm. I also believe that the current market conditions validate our long-term strategy that focuses on transforming our pulp mills into biorefineries, with additional revenue streams that can not only help balance our product mix, but grant us further resilience during pulp down cycles.
Our work on our lignin project pilot plant in Rosenthal is a great example, as is the carbon capture plant, pilot plant in Peace River and the work that we're doing in Stendal on sustainable aviation fuel. As 2026 progresses, we will remain focused on those elements of our business that we can control while implementing our short-term strategy. Thank you for listening. I will now turn the call back to the operator for questions. Thank you.
Operator (participant)
Thank you. To ask a question, please press star one one on your telephone and wait for your name to be announced. To withdraw your question, please press star one one again. Please stand by while we compile the Q&A roster. Our first question comes from the line of Roger Spitz with Bank of America. Your line is now open.
Roger Spitz (Equity Research Analyst)
Yes, thank you very much. Hopefully, you can hear me okay. The first question, Rich, is, can you say how much headroom that you have under any of your maintenance covenants as of December thirty-first?
Richard Short (CFO and Secretary)
Yeah, so we've got... Yeah, I don't have the number in front of me, but we're comfortable that we're well under the covenants at the end of the quarter, but we will expect them to get tighter as the year progresses, given the weak outlook.
Roger Spitz (Equity Research Analyst)
Great. And then, secondly, I don't know if you wanna comment in addition to 2026 CapEx, but cash interest, cash taxes and any working capital view, inflow or outflow?
Richard Short (CFO and Secretary)
We're expecting taxes to be negligible this year, interest to be around $120, and you heard Juan Carlos with the CapEx numbers, $60-$80.
Roger Spitz (Equity Research Analyst)
I'm sorry, I must have misspoke. I was thinking about working capital inflow or outflow.
Richard Short (CFO and Secretary)
Oh, it'll be a net outflow, probably around $100 million-$150 million at this point.
Roger Spitz (Equity Research Analyst)
It'll be an outflow of $100 million-$150 million?
Richard Short (CFO and Secretary)
Yep.
Roger Spitz (Equity Research Analyst)
What, what would be driving that?
Richard Short (CFO and Secretary)
Well, obviously, it's the work, the interest, the CapEx, and probably a small net outflow on working capital for the year.
Roger Spitz (Equity Research Analyst)
Oh, okay. I was just thinking working capital itself, as opposed to-
Recent taxes and CapEx. Are you including that in when you gave the $100-$150?
Richard Short (CFO and Secretary)
Yep.
Roger Spitz (Equity Research Analyst)
Okay, so I got to net that out. Okay, got it. Thank you very much.
Operator (participant)
Thank you. Our next question comes from the line of Sean Steuart with TD Cowen. Your line is now open.
Sean Steuart (Equity Research Analyst)
... Thanks. Good morning. Hoping you can give us some updated thoughts on potential asset recycling opportunities, as a measure to, I guess, expedite potential deleveraging of the balance sheet. You know, with some flexibility on available liquidity here, and any thoughts on asset closure potential and maybe costs that would be associated if you're taking potential pulp lines down?
Juan Carlos Bueno (President and CEO)
Yes, Sean. In terms of asset sales or restructuring, this is a subject that we have been analyzing and working on for quite some time now. Obviously, we are very conscious of the very tough conditions that we're working on right now, the possibility of claiming reasonable value for any particular asset in this cycle is not the right time. But we are obviously looking into that as we focus on our core assets and see our way through this trough. But that is at the center of our debt reduction plans, without a doubt.
Sean Steuart (Equity Research Analyst)
Okay. Thanks for that detail. With respect to the build of the order file for mass timber, which that's encouraging, can you give us a sense of expected margins associated with that uplift in sales?
Juan Carlos Bueno (President and CEO)
Yeah. What I can say in that sense is, when you look at 2025, which was relatively low as we were basically working with small projects all around. That year, even though it was a low sales result, it was a neutral cash flow. So the business was able not to be a drag, despite the fact that it was still low on sales. Now, for this year, obviously, we expect that to change, with sales, as we said, north of $120 million, and positive profitability, and obviously, with a contribution to cash. So we're still in the single digits as we—as this business has the potential to grow up significantly with the asset base that we have.
Considering that this $120 million that we're talking about is with Conway ramping up to two shifts only around APRIL or so in the Q2, and Spokane only ramping up to the two shifts maybe by the end of the year. So for the majority of the year, we would be running, let's say, on average, a shift and a half. So again, still single digits under that, but once we are running in two shifts on both facilities, obviously we'd be looking at a double-digit profitability for that business. And we're very encouraged by the growth that we're looking at.
Notwithstanding the fact that we have $163 million in the order book that we mentioned earlier, a part of that is obviously gonna happen in 2026, but we already have quite an important piece of business for 2027 in that order book. So again, it's filling up very nicely, and we're very confident of the growth that we will have in this business.
Sean Steuart (Equity Research Analyst)
Okay, that's great detail. Thanks for the context. That's all I have.
Operator (participant)
Thank you. As a reminder, to ask a question at this time, please press star one one on your touchtone telephone. Our next question comes from the line of Edward Brucker with Barclays. Your line is now open.
Edward Brucker (Equity Research Analyst)
Hey, thanks for taking the question this morning. My first one is on Peace River. Is there any thought to potentially closing the mill? And if so, you know, what is the timing of doing something like that? And are there any, you know, approvals from the government or hurdles that you have to go through to close something like that?
Juan Carlos Bueno (President and CEO)
Well, on Peace River, what we're working on is our transition from less hardwood to more softwood. That is of center and foremost, because we believe that we can extract much more value from the mill if we produce softwood over hardwood. And we're well underway in that road. Remember, this was a mill that was 80/20 to hardwood. Right now it's 70/30, and by the end of this year, we expect it to be 50/50. And it makes a big difference because we make money on softwood, we don't make money on hardwood. Obviously, depending on the price of hardwood. Beyond that, when you look into the work that we're doing or that we have been doing, we mentioned these energy projects, those would be very important contributors to the bottom line of Peace River.
There's government support for those, and also the carbon capture, which is further down the line, that's probably two years ahead of us or three years ahead of us, and that would be another important contribution to the profitability of the mill. So we do have a way through for this mill and are working actively with the government to support these projects, to support the mill, so that we can keep it, and make this vision a reality.
Edward Brucker (Equity Research Analyst)
Got it. And then, you know, my second question, just given the, you know, the, the difficult, market environment as well as, you know, potential cash burn for 2026, you know, any, any, new thoughts on productivity, with the maturity wall coming up in, 2027? And then-
... Also, I guess, in 2028 as well.
Richard Short (CFO and Secretary)
Sorry, Edward, how are we thinking about the 2028s and 2029s? Is that your question?
Edward Brucker (Equity Research Analyst)
Well, yeah, in the revolver maturity ahead of that.
Richard Short (CFO and Secretary)
Right. Okay. So the revolvers, we're talking to the banks, the banking groups for both. That's currently underway. The 2028s and 2029s, we've got some runway there, so we're happy with that, given where we are in the cycle. And we've been talking with our investors, so I think we're comfortable with where we are with those. And maybe if I could, just to pivot a little bit, I just wanted to clarify that our expectations around working capital for this year, I think I misunderstood Roger's question. We expect a modest cash outflow from working capital in 2026.
Edward Brucker (Equity Research Analyst)
Got it. Thank you.
Operator (participant)
Thank you. Our next question comes from the line of Cole Hathorn with Jefferies. Your line is now open.
Cole Hathorn (Equity Research Analyst)
Good morning. Thanks for taking my question. I'd just like to follow up on the market dynamics from here. If we stick to softwood pulp to begin with, we've started to see some supply disruptions with, you know, Indonesia reducing harvesting permits, which might impact the hardwood pulp market. We've seen hardwood pulp narrow the gap to softwood quite nicely. I know inventory levels are still high, but we've also got in Europe, SCA out with a price hike. I'm just wondering, you know, how do you see the outlook for the market? Is there more scope for upward pressure now that the gap to hardwood has narrowed?
Juan Carlos Bueno (President and CEO)
Cole, I think you're absolutely right. These latest developments in Indonesia are very significant. The impact or the known impact of APRIL, Riau taking 150,000 tons out of the market as downtime is important. The uncertainty whether APP OKI, 1.4 million mill startup, might be delayed, is also important because that could take away 650,000 tons of hardwood in 2026. So yes, there's all this impact of raising chip prices in Vietnam and China, and that is happening as we speak, as you well point out. And given that, as you said, that the...
Now the delta that Rich reported, that the delta between hardwood and softwood was 130 at the end of the quarter, well, it's now 100. So with hardwood pushing up, we do believe that there's a pretty like likelihood that we will see improved prices beyond what we have in our forecast, or at least much quicker than what we anticipated. We understand that we're now getting into the Chinese New Year. We understand that that means everything slows down a bit, and we have to wait until after New Year's to see what the effect is.
But I think if anything else, those very, very recent developments will tend to indicate a potential upward pressure on prices for both hardwood and inherently then for softwood, piggybacking on it. So yeah, it's rather positive.
Cole Hathorn (Equity Research Analyst)
Let's hope we see that reflect in the futures in the next couple of weeks. Shifting on to the lumber side, and particularly, I'm thinking about Europe. Now, you called out, you know, higher saw log costs and also pulpwood costs, well, I suppose wood chip costs for the pulp mills. It's always less clear how wood cost dynamics develop. I'd just like a little bit more color, you know, what are you seeing into Q1? You know, is this just lack of harvesting that's driving up saw logs and wood chips and pulpwood? And do you see any kind of turn in this market, or is this a kind of a structural, we should be higher for longer?
The reason I ask that is, you've obviously got the Nordic saw log and pulpwood prices coming down, so I'm just wondering how the Central Eastern European wood basket is performing.
Juan Carlos Bueno (President and CEO)
Yeah. Yeah, Cole, that's a very interesting dynamic as we're living it right now. Let me start with one of the elements that have a big impact on all of this, and that's the German energy policy. They incentivize the burn of wood for energy purposes, for pellet production and those kind of things. And what that creates is obviously a huge market for pellets, biofuels. Because the winter has been as hard as it has been, the prices of pellets have increased dramatically, and therefore, they're able to pay any price for residuals, whether it's wood chips or sawdust, they're in the lookout for anything they can buy.
That has an impact on us because when we buy wood chips for our pulp mills, well, we're now competing with these absurd pellet prices and values that they can pay that are obviously much higher than what we normally pay. So that is one of the elements that is impacting right now our wood chip costs in Germany. Now, when it comes to the pulp logs or the other residuals that we buy from other sawmills, that is dependent on the harvesting in Germany. The level of calamity that Germany was expecting last year did not happen. So the harvest that was planned did not happen. And the result of that was a significant shortfall in terms of availability of sawlogs totally in the market. So there you have it.
You have less output from sawmills, many of them running at slower speeds or cutting shifts. We suffered the consequences of it. In Friesau, we had to slow down production at times during the quarter because there was simply not enough wood to go by, again, as a result of this much, much lower harvesting levels, and that creating a pinch. So that are the, the two main issues behind the fiber dynamic that we see in Germany. It's been different in Scandinavia. There's been a big storm over there, a big need to pick up what was left over of that storm, so a bigger inflow of fiber.
Now, the fact that Scandinavia will have now lower prices would at least allow for a little bit less pressure from Scandinavia, as they were obviously looking at Germany or surrounding countries for supply before. Now they have plenty to work with, what they have over there, so that eases a little bit of the pressure that we will get in our home turf. But overall, it's still a very tough business environment. That's why we're expecting fiber prices to increase until we see proper harvest levels come back. And after we get through the seasonal aspect of bio pellets, biofuels. Obviously, we're in the middle of winter. Once that winter passes, the demand for pellets recedes, and obviously prices will naturally come down. That's a normal cycle for pellets.
That's a little bit of the pressure points.
Cole Hathorn (Equity Research Analyst)
That's helpful. And maybe if I just run forward with that, you know, hopefully the cost to your pulp mills come down in the summer periods as the pellet demands declines, and hopefully harvesting volumes increase for the sawlogs. But I suppose the other dynamic is, you know, price of your products. Potentially, we get pulp prices higher, which would be supportive, but on the lumber side, you know, we have some green shoots, I suppose, with like IFO commentary in Germany. You know, there is off a very low base construction industries looking a little bit better. Is there anything to call out there?
You know, are you seeing any lead indicators on the chemical side or, you know, the auto side or anything on the construction that's giving a little bit more confidence maybe into the Q2, into the summer period as well?
Juan Carlos Bueno (President and CEO)
That's a very good question, Cole, and probably one of the things that everybody speaks about is, in the case of Germany, the investment that the company has decided to make in matter of defense, with very significant increases versus what they had budgeted in previous years. That is something that will move the German economy as a whole. That is something that we believe will have some impact. However, that impact is not gonna be all of a sudden. That's a relatively slower pace of growth that we will see coming, but an important one for a country that has been stagnant and stuck in a recession for already three years, which again, is very uncommon for Germany.
So we do see that there's a little bit of hope in that regard, that there's a little bit of improvement coming, but it's not something that would happen overnight. We just see a gradual improvement over there, whether it's in construction activity. Obviously, we keep an eye very much on the U.K. That's a market that we serve quite a bit. That has been very good for us and where we dedicate a lot of resources and energy. Our prices in U.K. tend to be higher than what they are in Germany, so that's a market we privilege.
Just as the market in Japan, we do as much business in Japan as we can, as obviously the margins over there are even better, and we're able to deliver the high quality product that they need. The U.S. remains to be the valve. When prices are high and they are trending higher, we can pivot to the U.S., and we, we've done that many times before. I think in times that we sell more volumes to the U.S., we're close to 60%, 55 or more of volume into the U.S. We're right now at 41%, but the prices over there are increasing. And despite this 10% tariff that we have, as we've mentioned before, we believe we're pretty competitive into that market.
So, I think there's some positive momentum on prices overall in lumber for the year. That's what we would tend to expect.
Cole Hathorn (Equity Research Analyst)
Thank you. I'll get back in the queue.
Operator (participant)
Thank you. Our next question comes from the line of Dominik Jester with Aperta. Your line is now open.
Dominik Jester (Equity Research Analyst)
Hi there. Thanks for taking my question. Could you please comment on the extension of your two RCFs, how those discussions are going with lenders, and when you're expecting those to be concluded?
Richard Short (CFO and Secretary)
Well, we know these are gonna be more expensive. I think the banks have their things that they wanna change in the indentures, but I would say overall, the conversations are going well.
Dominik Jester (Equity Research Analyst)
Thank you. That's helpful. Do you have any indication of when you're hoping to get this wrapped up, timing-wise?
Richard Short (CFO and Secretary)
Yeah, that's a good question. Before the end of Q2, for sure.
Dominik Jester (Equity Research Analyst)
... Understood. And then one final question. Anything on size you can comment? Will there be, the same size as the current facilities? Any additional color would be helpful.
Juan Carlos Bueno (President and CEO)
Yeah, I think that's one thing we're talking about. So I think there is a, a bit of a push to reduce overall capacity slightly, but, not, not to a level that we're uncomfortable with, but obviously, more liquidity for us is better.
Dominik Jester (Equity Research Analyst)
Understood. Thank you.
Operator (participant)
Thank you. Our next question is a follow-up from Cole Hathorn with Jefferies. Your line is now open.
Cole Hathorn (Equity Research Analyst)
Thanks for taking the follow-up. I just wanted to ask around, you know, the point you made around pellets and the energy consumption. We're seeing industries lobby more and more to prevent, you know, imports and trade barriers. And, you know, when there's a dislocation, and it does seem like, you know, the priority of use should first be for wood, sawn wood products, you know, then kind of the downstream pulp industries before you get into energy. You know, is there any lobbying ongoing by the pulp and paper industry to prioritize that, to keep your raw materials a little bit lower rather than they getting pushed out by energy? Is the first one. And secondly, you know, there's been a lot of debate now around lower CO2 costs in Europe, and the CO2 prices come down.
Does that position you a little bit more favorably, or, or is it not really an item of consideration?
Juan Carlos Bueno (President and CEO)
Cole, very important questions. The answer to the first one is absolutely yes. What we are absolutely contrary to the policy of the German government of promoting the use of wood for biofuel purposes straight off. It doesn't make any sense in our minds. We privilege very much the fact that we need to extract the highest value of the harvests that we make, and it should only be based on residuals that the pellet industry should operate on. And there's been a lot of lobbying effort on that end. Unfortunately, there's a lot of forces that are not necessarily aligned. There are other interests from other parties that are contrary to ours.
But we stand by our, by our belief that from a pure environmental perspective and, and value capture perspective, the right thing to do is what we're promoting and what we're advocating for. In terms of the CO2, as you say, yes, that's another part of the equation that we emphasize, and that we have a, a line of communication with government on a regular basis, to make sure that the fact that we have biogenic carbon in our operations, that we have electricity that we generate by biomass sources, it's all taken into consideration when looking at all these CO2 emissions and credits and whatnot.
We are actively advocating for the proper allocation of those credits, and the maintenance of those credits over time, rather than a reduction of them, precisely on the back of the type of business that we run. That is very much in line with what the government is pushing for in terms of environment protection.
Cole Hathorn (Equity Research Analyst)
Then I have a question from an investor here that we're asking to everyone that has a sawn wood business in Europe. You know, they weren't able to give me a perfect answer, and I hope you can just kind of add some color to it. It might be too far out. You know, what we're seeing at the moment is we're seeing steel prices move up higher because of CBAM, plus we're seeing import tariffs on steel driving, ultimately, steel prices higher. We're also seeing cement prices higher. Historically, there always used to be this good correlation between sawn wood, lumber, steel, and cement, because they're all involved in the construction material space.
Do you see longer term, any form of kind of pricing umbrella that might shift the industry to use more wood, considering it is only, you know, 5% of building materials outside of the Nordics in Europe? You know, is there something that you are tangibly seeing now or something that you see in the future, or is this just a too long dated positive to, to be relative in your in your near-term thinking?
Juan Carlos Bueno (President and CEO)
I think, Cole, that the evolution of the use of wood for construction, substituting steel and concrete, is something that we will see coming. That is already happening. It just happens to be a very small fraction of the pie. Obviously, steel and concrete is the bread and butter of the construction industry and has been for decades. And changing that ship takes time. But when you look at Europe, in particular, let's talk about mass timber in Europe, where we do not participate, but that's a business that grows double-digit per year. It's growing, I think, at 11% per year now. So there is an important growth on that element, and that, again, is substituting concrete and steel.
When you look at that same growth in North America, we're talking about 22%-24% per year. So... And that's why we believe so much in the future of our mass timber business in North America, because there's a tremendous push for it, and there's all the reasons, whether it's in construction cost, environmental, just the speed of construction, the amount of labor that you need. Think about North America right now with all the political environment that we're facing, deportations and whatnot, labor for construction is a very significant issue, and we offer a solution for that problem. The amount of labor that is needed for mass timber construction is absolutely a fraction of what normal construction projects with concrete and steel would demand. So there is an alternative, there is a solution.
It is more cost effective now, without any doubt, to produce with, to construct or build with mass timber, but it takes time for developers, architects to understand mass timber. This is not something that everybody knows about. It's something that only with time and experience, people will believe and catch up on it. But again, the 20% growth year-over-year is already proof that there is a good chance that we'll see that market flourish, and that umbrella, as you say, shifting a little bit, and giving some space for mass timber to develop and substitute traditional construction methods.
Cole Hathorn (Equity Research Analyst)
Thank you.
Operator (participant)
Thank you. This concludes the question and answer session. I would now like to hand the call back over to Juan Carlos Bueno for closing remarks.
Juan Carlos Bueno (President and CEO)
Okay. Thank you, Shannon, and thanks to all of you for joining our call. Rich and I are available to talk more at any time, so don't hesitate to call one of us. And otherwise, we look forward to speaking to you again on our next earnings call in May. Bye for now.
Operator (participant)
This concludes today's conference. Thank you for your participation. You may now disconnect.