Reliance - Earnings Call - Q4 2017
February 15, 2018
Transcript
Speaker 0
Greetings, and welcome to the Reliance Steel and Aluminum Co. Fourth Quarter and Full Year twenty seventeen Earnings Conference Call. At this time, all participants are in a listen only mode. A question and answer session will follow the formal presentation. As a reminder, this conference is being recorded.
I'd now like to turn the conference over to your host, Brenda Miyamoto. Thank you. You may begin.
Speaker 1
Thank you, operator. Good morning, and thanks to all of you for joining our conference call to discuss our fourth quarter and full year twenty seventeen financial results. I am joined by Greg Mullins, our President and CEO Carla Lewis, our Senior Executive Vice President and CFO Jim Hoffman, our Executive Vice President and COO and Bill Sales, our Executive Vice President of Operations. A recording of this call will be posted on the Investors section of our website at investor.rsac.com. The press release and the information on this call may contain certain forward looking statements, which are based on a number of assumptions that are subject to change and involve known and unknown risks, uncertainties and other factors, which may not be under the company's control, which may cause the actual results, performance or achievement of the company to be materially different from the results, performance or other expectations implied by these forward looking statements.
These factors include, but are not limited to, those factors disclosed in the company's annual report on Form 10 ks for the year ended December 3136, under the caption Risk Factors and other reports filed with the Securities and Exchange Commission. The press release and the information on this call speak only as of today's date, and the company disclaims any duty to update the information provided therein and herein. I will now turn the call over to Greg Mullins, President and CEO of Reliance.
Speaker 2
Good morning, everyone, and thank you for joining us today to discuss our fourth quarter and full year financial results. 2017 was a fantastic year for Reliance. Our strong annual gross profit margin of 28.7 is near the high end of our target range of 27% to 29% and produced the highest gross profit dollars in our company's history of $2,790,000,000 Continued modest growth in demand, along with a positive pricing environment throughout most of the year, enabled us to grow our 2017 net sales by $1,110,000,000 over 2016 to reach $9,720,000,000 the second highest ever for Reliance. Our tons sold increased 3.8% in 2017, given a generally favorable macro environment that continued to improve throughout the year. Although metals pricing fluctuated throughout the year, the environment was positive overall, resulting in a 9.1% increase in our average selling price in 2017 compared to 2016.
Our managers in the field did an excellent job managing pricing fluctuations, growing our value added services to our customers, controlling expenses and managing working capital, all of which resulted in our second highest annual diluted earnings per share of $5.44 surpassed only by 02/2008. Our $5.44 earnings per share amount is non GAAP and excludes the $2.82 per share benefit from the impact of tax reform that Carla will discuss in a minute. Our tons sold in the fourth quarter were down 4.6% from the third quarter of twenty seventeen due to normal seasonality associated with the typical slowdown in shipping volumes resulting from fewer shipping days attributable to holiday related customer closures. This reduction in tons sold was in line with our expectation of a 4% to 6% decrease compared to the third quarter. However, overall demand remains strong with our shipments up 6.3% compared to the fourth quarter of twenty sixteen.
We expect to see further demand improvement in 2018 as overall customer sentiment continues to improve in nearly all the end markets we serve, with longer term incremental upside possible from the administration's infrastructure plans. Given Reliance's product mix, we are well positioned to benefit from an increase in infrastructure activity. The spring and summer months of 2017 were characterized by a high level of uncertainty related to the pending Section two thirty two investigation, which contributed to a heightened level of imports in the marketplace, pressuring metal pricing. However, the improving demand environment along with increased raw material pricing and trade pace resolutions in the second half of the year supported higher pricing levels on nearly every product we sell. As a result, our twenty seventeen fourth quarter average selling price was up 1.8% compared to the twenty seventeen third quarter, ahead of our expectations of flat to down 2%.
Our higher selling prices resulted from continued mill price increases in the fourth quarter that have continued into 2018 and contributed to our stronger than anticipated earnings. On a year over year basis, both shipment levels and average selling prices were up for all of our commodity categories, including stainless, carbon, aluminum and alloy. Since October of twenty seventeen, there have been more than 10 price increases announced for carbon steel products. These price increases were not fully reflected in our fourth quarter results and as such, we expect them to have a positive impact on our first quarter twenty eighteen results. Turning to our balance sheet.
We are comfortable with our inventory position, which supports our ability to provide just in time delivery to our customers, often in twenty four hours or less. For the year, we achieved an inventory turn rate of 4.5x, consistent with 2016. Inventory management will always be a key focus at Reliance as we believe that maintaining efficient inventory levels is one of the main drivers of our industry leading gross profit margin. Other crucial components include pricing discipline and value added processing capabilities. Together, these factors have enabled us to generate significantly more gross profit dollars in recent years that dropped to our bottom line.
In regard to value added processing, we will continue to make strategic investments in equipment and facilities to drive organic growth. Our 2018 capital expenditure budget is $225,000,000 with the majority of these investments growth related. We also expect to continue to grow and drive our earnings higher by acquiring well run businesses that expand our existing footprint, complement our diversification of products and services or increase our value added processing capabilities. While it is still early in the year, we are seeing an increase in the number of acquisition opportunities in the market in 2018. As a result of increased profitability and effective working capital management, we generated $399,000,000 in cash flow from operations in 2017.
To support our growth, we spent $161,600,000 on capital expenditures and completed the acquisition of Ferguson Perforating Company in October of twenty seventeen. Ferguson is a niche player in the perforated metals market, providing highly engineered specialty products and has been operating in line with our expectations and was accretive to our 2017 earnings. We also paid $132,000,000 in cash dividends to our stockholders and repurchased $25,000,000 of our stock in 2017. In addition, effective for the first quarter of twenty eighteen, we increased our regular quarterly cash dividend by 11.1% to $0.50 per share or an annual dividend of $2 per share. Reliance has paid regular quarterly dividends for fifty eight consecutive years, and this is our twenty fifth dividend increase since our 1994 IPO.
These stockholder return activities demonstrate the confidence our Board and management team have in our business model and our outlook. In summary, 2017 was an exceptional year for Reliance. We are encouraged by the positive pricing momentum and improved demand environment that we saw in 2017 that has continued into 2018. In addition to higher metal pricing, our strong gross profit margin enabled by the fantastic performance of our managers in the field allowed us to generate higher earnings. While some uncertainty still exists in the market, we believe that overall customer sentiment and demand are continuing to substantially improve, and we anticipate that an ongoing reduction in imports will continue to support higher metal pricing.
We believe these factors as well as the potential for meaningful infrastructure spending will increase metal demand and pricing, which we expect will enhance our profitability and strong cash flows. Over the past five years, we have invested $2,260,000,000 to further our growth through capital expenditures and acquisitions, and we have returned over $1,000,000,000 to our stockholders through dividends and share repurchases. We look forward to returning even greater value from these investments and continuing our strong stockholder return activities. I will now hand the call over to Jim to comment further on our operations and market conditions.
Speaker 3
Jim? Thanks, Greg, and good morning, everyone. First off, I would like to recognize our folks in the fields who contributed to our strong 2017 results. We thank you for your hard work and dedication that helped us achieve another year of strong operational performance. Now I'll discuss demand and pricing of our carbon steel and alloy products as well as our outlook on certain key end markets we sell those products into.
Bill will then address our aluminum and stainless steel products and their related end markets. Demand for automotive, which we service mainly through our toll processing operations in The U. S. And Mexico, remained strong throughout the fourth quarter. We continue to make investments to expand our facilities and equipment to increase our capacity to both carbon and aluminum processing or automotive market.
Our facility in Monterrey, Mexico has now been operational for a full year and continues to perform in line with our expectation. In addition, we completed construction of a new facility in Kentucky in the second quarter of twenty seventeen to support increased demand for both aluminum and steel processing in that region. In the fourth quarter of twenty seventeen, we were operating at approximately 50% of expected capacity in this location, and we look forward to continuing to ramp up the Kentucky facility processing capacity in coming months. Demand in heavy industry, which includes railcar, truck trailer, shipbuilding, barge manufacturing, tank manufacturers and wind and transmission towers began to improve from low levels in the second half of twenty seventeen. In particular, we continue to experience an increase in construction equipment spending.
Looking ahead to the first quarter of twenty eighteen, we are optimistic that demand in heavy industry will continue to strengthen. Demand in nonresidential construction market, including infrastructure, grew at a steady rate throughout 2017, but still remains far below peak levels experienced in 02/2006. We are cautiously optimistic that domestic infrastructure spending will continue to improve with incremental upside possible from federal infrastructure spending. Extreme winter weather conditions in the East also played a small role in delaying certain fourth quarter nonresidential construction projects, pushing them into the first quarter first half of twenty eighteen. We remain well positioned to support increased volume in our existing footprint at this end market as this end market continues to gradually improve.
Demand for the products we sell into energy market, which mainly is oil and natural gas, steadily improved in each successive quarter in 2017. We continue to see growth in rig counts and drilling activity with mill lead times extending and completion activity gaining strength. Importantly, our businesses servicing the energy market contributed positively to our earnings in every quarter of 2017 after hitting what we believe was the bottom in 2016. The increased activity in energy is an encouraging sign. We are well positioned to support demand growth as this market continues to recover, which is in line with our expectations for a stronger 2018.
Mill pricing for carbon steel products we sell into these end markets was stronger than we had anticipated in the fourth quarter. As we noted on our last call, we experienced fairly significant price reductions for certain of our carbon steel products late in the third quarter that we expected would negatively impact our average selling price in the fourth quarter. However, as Greg had mentioned, there were a number of price increases for carbon steel products announced throughout the quarter, all of which were supported. As a result, we were able to maintain our pricing and pass a portion of the announced pricing increases along to our customers during the fourth quarter before receiving the higher cost metal into our inventory. This resulted in a slight improvement in our gross profit margin for carbon steel products versus the prior quarter.
So far in 2018, there have been continued mill price increases for carbon steel product that are being supported, and we are optimistic there is room for further increases due to an overall reduction in import offerings, the pending Section two thirty two decision, higher demand and increasing raw material price. Price for alloy products has been improving as demand in energy market continues to recover. We believe that further improvement in activity levels in the energy market should help support increased pricing going forward. In summary, we are confident about our positive 2018 outlook as it relates to both demand and pricing trends. We are experiencing continued strength in our tolling businesses servicing the automotive industry, and we are pleased to see steady increases in demand for energy, nonresidential construction and heavy industry markets.
We remain committed to investing in value added processing equipment for the businesses that support these end markets and believe we are well positioned to absorb increased volumes in our existing footprint and cost structure as these markets continue to strengthen. Thank you for your attention today. I will now hand the call over to Bill to comment further on our nonferrous markets. Bill? Thank you, Jim.
Good morning, everyone.
Speaker 2
First, I would also like to thank our folks in the field for their excellent operating performance in 2017. Thank you all for a job well done. I'll now review pricing and demand for our aluminum and stainless steel products, including the key industry trends in these markets we sell the products into. Aerospace demand remained strong in the fourth quarter. Today, lead times for aluminum aerospace plate are steady compared to the third quarter at approximately seven to ten weeks.
The backlog for orders of commercial planes is strong, and we expect bill rates to continue to improve in 2018, led by single aisle planes. We continue to see increased activity from many of our defense customers. Our production activity related to our participation in the five year $350,000,000 Joint Strike Fighter program that began in 2017 is now fully ramped, and we expect production levels to remain fairly steady for the foreseeable future. Further, our entry into the aerospace market in India through our all metal services subsidiary is now expected to become operational by the end of the first quarter of twenty eighteen. We maintain our positive outlook for the aerospace market and look forward to increasing our market share in this area as overall demand continues to grow.
As it relates to the semiconductor market, global activity remains strong. Because of the optimistic global growth outlook and our strong position in this market, particularly in The U. S. And Pacific Rim regions, we are in the process of expanding our operation in South Korea that supports the semiconductor industry and adding new manufacturing capacity in The U. S.
And China to support higher production needs. We maintain a positive outlook for the semiconductor market in 2018 based on solid demand trends and an encouraging outlook from our customers. Moving on to pricing. The majority of our sales into the aerospace market consist of heat treated aluminum products, especially plate as well as specialty stainless steel and titanium products. Demand for heat treated aluminum plate has continued to improve.
The most recent price increases for aluminum heat treated products that took effect in January have been fully supported by the mills. Looking ahead to the first quarter of twenty eighteen, we are optimistic that aerospace pricing will continue to strengthen. Most of our common alloy aluminum products are sold to sheet metal fabricators that support a variety of end markets. Demand for common alloy aluminum sheet remained relatively stable in the fourth quarter with lead times remaining at eight to twelve weeks. Currently, we are seeing demand strengthen with lead times extending to twelve to sixteen weeks.
From a pricing standpoint, the announced conversion price increases for common alloy aluminum sheet have support. The conversion price increases, combined with an increase in the Midwest spot price, should lead to higher prices for common alloy aluminum sheet in the first quarter. Lastly, demand for our stainless steel flat products, which are primarily sold into the kitchen equipment, appliance and construction end markets, has remained solid. Our average selling price for stainless steel products increased during the fourth quarter, driven primarily by September and November price increase announcements, each a two point reduction of the discount for commodity stainless flat roll products, which were supported in the market. Demand for stainless steel remains strong.
The January price increase of another two point reduction in discount has domestic support, and we believe there is a potential for further price increases. Thank you for your time and attention today. With that, I'll now turn the call over to Carla to review our fourth quarter twenty seventeen financial results. Carla?
Speaker 4
Thanks, Bill, and good morning, everyone. Our net sales in the fourth quarter of twenty seventeen were strong at $2,380,000,000 up 15.3% from the fourth quarter of twenty sixteen with our tons sold up 6.3% and our average selling price per ton sold up 8.8% year over year. Compared to the third quarter of twenty seventeen, our net sales were down 3% with tons sold down 4.6 and our average selling price up 1.8%. As discussed previously, the pricing environment in the fourth quarter of twenty seventeen was stronger than we had anticipated. The combination of overall higher prices and increased shipping levels across all of our commodity categories resulted in three fifteen million more sales dollars in the fourth quarter of twenty seventeen compared to the fourth quarter of twenty
Speaker 2
sixteen. For the
Speaker 4
full year, our net sales were the second highest in our company's history at $9,720,000,000 up 12.9% from $8,610,000,000 in 2016. Tonnes sold were up 3.8% and our average selling price was up 9.1% compared to 2016. Our gross profit margin in the fourth quarter of twenty seventeen was 28.6%, down from 29.8 in the fourth quarter of sixteen and up from 28% in the third quarter of twenty seventeen. Our full year gross profit margin was 28.7% in 2017 compared to 30.1% in 2016. We are proud of our 2017 gross profit margin that was at the high end of our target range of 27% to 29% and resulted in record gross profit dollars of $2,790,000,000 As a result of higher metal prices in 2017, our year end cost of inventory on hand was higher than at the end of twenty sixteen.
This resulted in a net LIFO inventory valuation charge or expense of $30,700,000 for 2017 compared to a credit adjustment or income of $27,400,000 in 2016. Our actual LIFO expense for 2017 was $73,300,000 but was offset by $42,600,000 from the full reversal of our lower cost or market reserve. At this time, we anticipate metal prices will increase in 2018, which means our year end inventory costs on hand will be higher than at the end of twenty seventeen. As a result, we currently estimate LIFO expense of $80,000,000 for the 2018 year or $20,000,000 per quarter. As in prior years, we will update our expectations quarterly based upon our inventory costs and metal pricing trends.
As a percentage of sales, our fourth quarter SG and A expenses were 20.2%, down from 21.4% in the fourth quarter of twenty sixteen and up from 19.2% in the third quarter of twenty seventeen. For the year, our SG and A expenses were 19.6% of sales, down from 20.9% in 2016. The year over year decreases were primarily due to higher selling prices in 2017 compared to 2016, which increased our net sales. Interest expense for the year decreased by $10,700,000 in 2017 compared to 'sixteen, mainly due to the November 2016 refinancing of our 6.2% senior notes with bank debt. In 2017, we recorded 4,200,000 of impairment charges compared to $52,400,000 in 2016 that were mainly related to our businesses servicing the energy end market.
These amounts are included in our non GAAP adjustments, which can be found in our earnings release issued earlier today. Our non GAAP pretax income for 2017 was $582,000,000 up $87,200,000 or 17.6% from 2016, resulting in a pretax margin of 6%. The enactment of the Tax Cuts and Jobs Act or tax reform in December 2017 resulted in a provisional income tax benefit of $207,300,000 in the fourth quarter or a benefit of $2.81 per diluted share. Tax reform impact reflects a one time provisional tax on accumulated overseas profits and the revaluation of deferred tax assets and liability. Excluding the impact of tax reform, our effective tax rate would have been 20.1% for the fourth quarter and 29.1% for the full year of 2017.
While we will continue to assess the impact of tax reform, we currently expect our effective tax rate for 2018 to be in the range of 24% to 25%, reducing our annual cash taxes by approximately $50,000,000 Net income attributable to Reliance for the fourth quarter of twenty seventeen was $301,400,000 or $4.9 per diluted share. Excluding the impact of tax reform, net income was $94,100,000 or $1.28 per diluted share. Non GAAP earnings per diluted share were 1.22 compared to $0.84 in the fourth quarter of twenty sixteen and $1.32 in the third quarter of twenty seventeen. For the full year, net income attributable to Reliance was $613,400,000 or $8.34 per diluted share. Excluding the impact of tax reform, net income was $406,100,000 or $5.52 per diluted share.
Non GAAP earnings per diluted share were the second highest annual diluted earnings per share in the company's history at 5.44 compared to $4.48 in 2016. Turning to our balance sheet and cash flow. As a result of our higher average selling prices and shipment levels, along with our strong gross profit margin and effective working capital management, we generated $399,000,000 in cash from operating activities during 2017. We invested $161,600,000 in capital expenditures, spent $37,800,000 for an acquisition, repurchased $25,000,000 worth of our common stock at an average cost of $74.27 per share and paid $132,000,000 in dividends to our stockholders, while also paying down debt. At December 3137, our total debt outstanding was $1,910,000,000 resulting in a net debt to total capital ratio of 27.2%.
Our net debt to EBITDA multiple was two point zero times in line with our targeted financial profile. As of the end of the fourth quarter, we had over $900,000,000 available on our $1,500,000,000 revolving credit facility. As for our outlook, given a strong start to 2018, we are optimistic with regard to business activity levels and metal pricing in the first quarter of twenty eighteen. We estimate that our tons sold will be up 6% to 8% in the first quarter of twenty eighteen compared to the fourth quarter of twenty seventeen. Further, we expect our average selling price in the first quarter of twenty eighteen will be up 4% to 6% compared to the fourth quarter of twenty seventeen as recent increases in metal pricing have been supported thus far.
As a result, we currently expect earnings per diluted share to be in the range of $1.9 to $2 for the first quarter of twenty eighteen. In closing, we are very pleased with our overall financial and operational performance in 2017, which is directly attributable to outstanding execution by our managers in the field. Our strong balance sheet provides us the foundation to continue executing our growth and stockholder return activities. Our repurchase of $25,000,000 of our common stock during the fourth quarter of twenty seventeen and the November increase in our quarterly dividend effective in the first quarter of twenty eighteen reflect the confidence our Board and management team have in our outlook and ability to execute in the current favorable environment for both demand and pricing. That concludes our prepared remarks.
Thank you for your attention. And at this time, we would like to open the call up to questions. Operator?
Speaker 0
Thank you. At this time, we will be conducting a question and answer session. Session. Will be a Our first question is from Chris Terry from Deutsche Bank. Please go ahead.
Speaker 5
Hi, guys. Thanks for taking my questions and well done on a solid result. First question I had just on CapEx. I think you said $225,000,000 for 2018. Are you able to talk through the different growth projects and how that CapEx is expected to be split, please?
Yes.
Speaker 2
As far as our growth initiatives of the $225,000,000 that we reported, about 59% of that or $132,000,000 is in growth related initiatives.
Speaker 4
Yes. That's made up of quite a few different projects, Chris. We've got a lot of it's based on growth through new value added processing equipment, so we can expand our capabilities in various of our existing operations. But it's many different projects. For us, we're different we don't have $100,000,000 individual CapEx projects.
So it's quite a bit spread across our companies.
Speaker 3
Yes. Chris, this is Jim. And a lot of those dollars go into new operations, so we can get closer to our customers. As we've said before on other calls, our customers are asking us to do a lot more. And sometimes we need to expand our locations or actually get or build a brand new location closer to them.
As Carla mentioned, a lot of higher technology, better tolerance equipment that we're adding. So there's a lot of big projects, a lot of smaller projects. As Greg said, 59% of that $224,000,000 was what we would consider growth and the rest was kind of maintenance replacement.
Speaker 5
Okay. Sure. And then just on the M and A outlook, you commented on that a little bit before. But given that the pricing backdrop in the overall sector seems quite strong, can you just comment on the ability to actually execute deals at the moment? I assume companies are not really willing to sell given the positive environment.
Speaker 2
I don't know about that. Our activity, okay, has actually picked up here in 2018 as compared to 2017. So obviously, there's some move on sellers' parts to get themselves lined up with the potential acquirer. So our activity is better there. That doesn't mean we're going to be knocking home runs out.
We have to take a look at each one on its own merits, look at their profitability, management teams, cultures, etcetera, etcetera. But from an activity point of view, we're actually encouraged by what we've seen since the first of the year.
Speaker 5
Okay. Okay. And then the last one for me, just on I think you talked a bit about the stainless market, but can you just elaborate on the outlook there? And then also specifically on the plates market where there's been strong price rises, I guess, since the October time frame of last year. Can you just chat through that market a little bit as well?
Speaker 2
Keith, you want to do plate first?
Speaker 3
Yes. On the carbon plate side, demand is looking good. A lot of price increases have been coming through. All the way up until yesterday, there was a $50 price increase based on demand, some input charges. The mills are busy.
Last figure I saw, their capacity rating is in the 74.5% range, which is good for them. I'm sure they'd like to be busier. One big particular mill actually has people on controlled order entry, which is a sign of good demand and some supply issues. So on the plate demand side, it's better than it was.
Speaker 2
Chris, a very similar story on the stainless side. Demand was solid all through 2017. We've seen demand strengthen and lead times have moved out from six to eight weeks to about eight to ten weeks. The January increase seems to have support. There seems to be more pricing discipline in the market based on the strengthening demand.
So the outlook there is very positive.
Speaker 5
Okay. Thanks, everyone. Appreciate the answers.
Speaker 0
Our next question is from Martin Englert from Jefferies. Please go ahead.
Speaker 6
Hi, good morning everyone. Congratulations on the strong results there.
Speaker 3
Thanks, Martin.
Speaker 6
Want to see are you able to discuss what your 2017 tolling volumes were and how that's changed maybe from the previous year as well as the changes in participation within carbon and aluminum and how you may have grown some market share there?
Speaker 4
Yes. So our on the tolling business, our tons sold, and we've said this for a few years now, we actually process more tons in our tolling businesses than we sell our tons sold for the rest of the company. So it's a substantial amount of volume that we're handling there. We've seen that with the investments we've made to grow our capacity in both carbon and aluminum processing. In our tolling businesses, we do see those tons continue to increase year over year.
We are seeing a bit more of a mix shift to aluminum from carbon, but the aluminum tolling that we've had has been new business for us. So we didn't lose carbon business and have the aluminum in place of that. So we are seeing that aluminum tolling business continue to grow for us. We've, as we said, made some recent investments there. And based on discussions, we expect the aluminum business to continue to improve.
At the same time, the carbon steel processing is still very important for us, and we continue to see solid business out of the carbon side as well.
Speaker 2
The new plant that we built in Kentucky was specifically brought on board because of aluminum usage in that particular area. So our customers asked us to be closer to them, which we've done. And I think it's working which is running at capacity wise, Jim, about 50%. So we've got a ways to go there, but we've got strong backlogs for that. So but we haven't seen that much of a drop off on our carbon steel usage through our toll processing operations, which we other than the fact that some of the bills have had some outages and whatnot.
On a same store basis, regular volume basis, we really haven't seen a drop in our carbon steel, but we've seen vast improvement in our aluminum processing by far.
Speaker 6
Okay. Excellent. And if I could, one other. Maybe if you could provide some comments regarding the company's leverage to nonresidential construction infrastructure, recalling some of the prior acquisitions such as P and A Group and others that may have expanded capabilities since the last upcycle?
Speaker 3
Yes, this is Jim. We're seeing nice demand. It's kind of a slow burn up over the last two or three years. We've had a nice gradual increase in nonresidential construction. We anticipate that to continue through 2018.
We still have a long way to go to back to the top, which is probably 02/2006, 2008 for time frame. And if it does get up there, we're well positioned to take additional work without adding a lot of things other than probably some couple of bodies. But our brick and mortar and the equipment is we're in good shape there, and we've continued to upgrade that throughout the recession. So we're in good shape with that.
Speaker 2
Roughly about onethree of our business is in the nonresidential construction, and that also includes infrastructure. So it's a big part of our overall mix. And we have had, as Jim just pointed out, some steady improvement over the past two or three years. But we've got, as Jim said, we've got equipment in place, facilities in place, brick and mortar, etcetera, etcetera, that we can take on a lot more tonnage and add very little expense to our bottom line.
Speaker 6
Where do you think the nonresi infrastructure was percentage of overall sales during the last upcycle?
Speaker 4
Yes. And it's hard for us to tell because of our customer base and where product is going. So we kind of look at our product mix and just the businesses we have out there. But as Greg said, we generally think it's about onethree of our business on $1 percent of revenue dollars. I don't we really can't get much more granular than that.
Speaker 0
Okay.
Speaker 2
The beauty about nonresidential construction and infrastructure growing is that it's it's the largest consumer of carbon steel products of any industry in the country. So it drives all the carbon steel products. And with that, generally, we see price increases because demand is so much stronger in all the different products.
Speaker 6
Okay. Thank you for all the detail.
Speaker 0
Thanks. Our next question is from Novid Rasouei from Cowen and Company. Please go ahead.
Speaker 7
Good morning, Greg, Carla, Jim and Bill, congrats on the strong results. Good morning, Hugh. Good morning. Sticking with non res, can
Speaker 2
you just give us a sense
Speaker 7
of how things are tracking maybe relative to this time last year? And does the story remain kind of the same gradual incremental growth, but nothing kind of dramatic or off the charts without some sort of action from the current administration?
Speaker 3
Yes, I agree with that. It feels about the same as it did last year. It's incrementally better. It's positive. We're getting the quotes we think we earned.
As we've said in the past, we're not the guy that does the forty, fifty story building. We're the guy that does the four story assisted living home or the college campus expansion, that's our sweet spot. And that's what we continue to see. That's what we continue to get. We guessed right.
We know when you come back from a recession, customers are going to ask us to do different things. We invested in the value added equipment then. And as they come online, we're able to do more for them, which helps our bottom line. So yes, I agree with your assessment. It kind of feels like last year at a nice gradual pace up.
Speaker 2
We're pretty optimistic. And certainly, it would be very, very helpful if the administrative got in bed and started throwing some cash at it and getting the private sector to invest as well. But that would have a very, very positive impact on us. And we've all been waiting for that for about a year. And hopefully, that'll be we'll see something happen that we can actually put our fingers on in the next few months.
But nonetheless, that would have a very positive impact. But as it is today, as we're sitting in this room, some of the most profitable companies we have in the corporation are committed to the nonresidential construction market.
Speaker 7
Got it. Very helpful. And then switching gears to the oil and gas side. Just wondering if you guys can be a little bit more specific with respect to the maybe the products that you are seeing kind of the quoting and overall activity picking up for. If there's any standouts, if it's across the board, just to try to get a sense of how this kind of recovery that began in 2017 is starting to look as we get further along?
Thank you.
Speaker 3
Yes, I can it's kind of across the board. You have to remember, we're not in line pipe or OCTG. That's those are the two big heavy hitters that get a lot of attention. We're in the drilling and the completion end. And we've got companies that do a lot in completion and a lot in drilling and all everything in between.
So the products that are doing well so far have been mostly on the drilling side, but we are seeing more and more activity in the completion side. So it's every it's product, everything from heavy wall alloy tubing to alloy bars to a lot of different higher alloys, higher priced material that goes into everything from drill collars to Christmas trees to pump jacks.
Speaker 0
Thank you.
Speaker 2
Primary alloys, the bottom line on the carbon steel end.
Speaker 0
Our next question is from Phil Gibbs from KeyBanc Capital Markets. The
Speaker 8
question was on the operating expenses. I think we noticed the fourth quarter expenses were up quarter on quarter when you had seasonally weaker volumes. I would assume some of that is bonus accruals because you guys had a great year. But can you talk about the baseline operating expense environment, excluding what the comp may have comp component may have been just because we're noticing that freight other costs of doing business are higher? And then we're also trying to get a good run rate in terms of what we should be using for the first quarter.
Speaker 4
Hi, Phil. So on the SG and A expenses, fourth quarter is usually not as predictable as the other quarters of the year, just because year end true ups and things. But overall, because we do have in the fourth quarter holiday pay during that quarter. So even though we're not shipping as much, we're still paying our employees for the holidays. So that always affects the fourth quarter a bit.
Other than that, certainly, yes, some of the freight costs are up, but and that hits our SG and A expense line, but we also pass that's part of what we charge our customers for. That's one of the services we provide is delivering our product to them. And the majority of our delivery is done on our own trucks. So it's with our drivers that are our employees. So I think we're not seeing the squeeze that you hear from some other companies in our industry who are outsourcing more to third parties.
But certainly, fuel and some of those items are up. But again, in our model, we try to pass that through to our customers. So it hits the SG and A line, could be a little higher, but the revenue line should also be a bit higher to cover that. Run rate going forward, if you look at like Q1, Q2 of last year, those are probably better normal type of SG and A run rate. We do we did again in 2018, as we have done consistently, is provide wage increases to our employees.
So you should expect our Q1 twenty eighteen, our quarterly run rate in 2018 to be a bit higher than in 2017 just because of the inflationary factors related to wage increases, healthcare increases, etcetera.
Speaker 8
Okay. That's helpful. And I noticed in your I think your non fair script, Bill, you had talked about some of the business that you're setting up outside The U. S, I think in Korea and maybe China. And I know semiconductor spending, I think we've talked in the past, can be extremely volatile.
It can be very strong at the good times and very weak at the bad times. So I'm just trying to balance out the timing of the investment that you all are making and then what gives you confidence that you're making it at the right time given where the cycle is?
Speaker 2
Phil, you're right. It does tend to be somewhat volatile. But the outlook is really positive. We saw last year on the semiconductor side, it was extremely strong. And that looks like it's going to carry through this year.
The investments that we're making in Korea and China and some here in The U. S. Are focused on the semiconductor market. And then the other investment, the new facility is all metal services in India, which is aerospace focused. And the outlook is very positive for all of that, which is one reason we're very comfortable making those investments.
Speaker 4
And in South Korea, Phil, we've been in that market, I think, about fifteen years. So we're not a new player. We're not just jumping in because of the current outlook. We've been there and feel we know that market pretty well. And we've been in China for a while now as well.
We do feel comfortable making those further investments in those operations.
Speaker 2
Basically, in South Korea, we've been there, as you pointed out, about fifteen years, but we're basically doubling the size of our production capacity there, okay? So it's a good investment, but it's paying dividends as we speak, and I think we're putting the money in at the exact right time. I do, too.
Speaker 8
Are these for new customers or existing customers? I'm just trying to gauge the pull.
Speaker 2
Both. Both. For some major customers that are expanding their operations, and there's some new business in that also. But the vast majority is on existing customers expanding their production.
Speaker 8
This is for industrial aluminum plate for the most part? Is that what we're talking about here?
Speaker 2
It's no. Some of that investment is the electro polished tubing that goes into the vacuum chamber industry. So it's not all plate driven. And the major investments that we're talking about in Korea and China are more tubing oriented than plate. And that's stainless steel.
Okay.
Speaker 8
Thanks very much. Talk to you soon.
Speaker 2
Okay. Good.
Speaker 0
Our next question is from Aldo Messefero from Messefero Research. Please go ahead.
Speaker 9
Hi, good morning. Morning, Aldo. Hey, I got two questions, Greg. The first one on the pricing angle, you mentioned your forecast on pricing 4% to 6% higher in the sequential quarter and that will probably trail some of the indexes. I'm wondering, are you able to pass on all the dollar for dollar increases that you're getting at this time on the tons?
Speaker 2
Yes, we will. But the main question is how much can we get capture like immediately upon announcement. As you know, the vast majority of our business, in particular, on carbon steel products, okay, is spot business. We have very little contractual business on that. So we literally take the position that when the announcement is made, as Jim just mentioned, 50 a tonne on carbon steel plate was we learned about yesterday, that $50 a tonne will be on our price books effective this morning.
We'll get that with our average order size is a little over $1,600 per order. So obviously, we're doing business with a tremendous amount of job shops, smaller companies placing smaller orders. And those companies, okay, whether you're charging them $1,600 for an order or $16.50 dollars or $1,700 it's not that big of a deal. So we can get a lot of those price increases at time of announcement. The more sophisticated companies, the large ag producers and whatnot, they recognize the fact that we've got a three month on our floor inventory position.
And it's not likely that they're going to pay at time of announcement, but we'll get it, okay? It's a matter of do you get it today or do you get it in sixty days from now. But at the end of the day, we get it.
Speaker 4
And that's where, Aldo, you mentioned potentially trailing the indexes. And of the things you have to think about is our product mix and factor that in when you think about whatever indexes you're looking at into what Greg was talking about, some of the mill increases that are effective in Q1, we already got in Q4 of twenty seventeen. So depending how you're comping us against the indexes out there, you've got to take that into consideration also.
Speaker 9
Right. Yes, I was just kind of thinking that you're always going to be trailing a little bit, right? So the things we're seeing in the first quarter now in terms of announcements means you're probably going to have some catching up to do into the second quarter too as you go. But my bigger question is, Greg, do you think the market do you think the steel market can take any more trade protection? I mean, the fact that we're facing some lower imports now, we got demand picking up and you have President Trump with a Section two thirty two potential in front of him.
But other than big friendly countries and maybe semi finished steel, could he do without causing major disruption to the market? I'm just wondering if you think he's going to do you think the market's at risk if he does nothing?
Speaker 2
Yes. Let me tell you what I know about the two thirty two cases. I don't know anything about the God dang two thirty two. I'm so confused by the son of a gun. It's supposed to go into effect in June, didn't go into June, it's supposed to go into effect in August, it's supposed to go into who the hell knows, okay?
All I know is that Jim says, we don't run our company based on hope. We run it based on what we know. And all we know is that imports are lower. We think they're going to be they're going to continue to go down somewhat, not at the probably at the percentage that they went down in basically the fourth quarter of the year, okay? But we think there's room for imports to continue to decline.
We're hopeful that there's more price increases because we like prices higher than lower. But at the same time, we are we hope that the mills use some discipline, so the spreads don't become so great that imports come in more. But if you want to get a really good answer to your two thirty two, you better call the White House. You're parking up the wrong tree here.
Speaker 3
And Aldo, just one thing to add. Regardless of what they're calling it, there's countries who are cheating. I mean there's laws on the books and they're flat out cheating and dumping product into The United States. That's a fact. Whether we decide to enforce the laws that are already on the book or add new laws, they're cheating and dumping product into the country.
Speaker 9
Great. Thank you.
Speaker 2
Thanks, Aldo.
Speaker 0
Our next question is from Phil Gibbs from KeyBanc Capital Markets. Please go ahead.
Speaker 5
Yes. I think I just had a
Speaker 8
follow-up question on the LIFO. And Carla, in terms of what your assumptions are behind that, are you assuming that your pricing guidance levels for Q1 basically hold through the course of the year? Thanks.
Speaker 4
Yes. So we do have to make an estimate for the full year. So the $80,000,000 of expense is based on our current estimate with our outlook. So we do think that current pricing will hold and that there's room for further upside. Certainly, we've been in this business a long time.
Prices go up and they go down. But our $80,000,000 we think does leave a little room for some fluctuation throughout the year. But overall, we expected our prices at the end of the year to be higher than they were at the beginning of the year. And we kind of compare the $80,000,000 estimate is of expense is a little more than our actual 2017 expense of $73,300,000 So you can kind of use that as a guide of what pricing did in 'seventeen to be what our expectations are for 'eighteen.
Speaker 8
That's very helpful. Thank you.
Speaker 4
Thanks, Bill. And sorry, Phil, and also remember though, it's our inventory cost on hand at December 3137, which is our starting point, because of time lags, doesn't did not reflect all the price increase announcements. So some of the price increase LIFO effect we'll get in 2018 is based on Q4 twenty seventeen price increases as well.
Speaker 0
Great. Thank you. This concludes the question and answer session. I'd like to turn the floor back over to Mr. Mallins for any closing comments.
Speaker 2
On behalf of our team here at Reliance, I'd like to thank all of you for participating in today's call. I'd also like to extend my gratitude to all our employees, customers, suppliers and stockholders for their continued support and commitment to Reliance. We look forward to a successful year ahead, and have a great day. Thank you.
Speaker 0
This concludes today's teleconference. Thank you again for your participation. You may disconnect your lines at this time.