Cabot - Earnings Call - Q2 2021
May 4, 2021
Transcript
Speaker 0
Thank you for standing by, and welcome to the Second Quarter twenty twenty one Cabot Earnings Conference Call. At this time, all participants are in a listen only mode. After the speakers' presentation, there will be a question and answer session. Please be advised that today's call is being recorded. I would now like to hand the call over to Steve Dellahunt, Vice President, Treasurer, Investor Relations.
Please go ahead.
Speaker 1
Thank you, and good morning. I'd like to welcome you to the Cabot Corporation earnings teleconference. With me today are Sean Cohain, CEO and President and Erica McLaughlin, Senior Vice President and CFO. Last night, we released results for our 2021, copies of which are posted in the Investor Relations section of our website. The slide deck that accompanies this call is also available in the Investor Relations portion of our website and will be available in conjunction with the replay of the call.
During this conference call, we will make forward looking statements about our expected future operational and financial performance. Each forward looking statement is subject to risks and uncertainties that could cause actual results to differ materially from those projected in such statements. Additional information regarding these factors appears under the heading Forward Looking Statements in the press release we issued last night and in our annual report on Form 10 ks for the fiscal year ended 09/30/2020, and in subsequent filings we make with the SEC, all of which are available on the company's website. In order to provide greater transparency regarding our operating performance, we refer to certain non GAAP financial measures that involve adjustments to GAAP results. Any non GAAP financial measures presented should not be considered to be an alternative to financial measures required by GAAP.
Any non GAAP financial measures referenced on this call are reconciled to the most directly comparable GAAP financial measure in a table at the end of our earnings release issued last night and available in the Investors section of our website. I will now turn the call over to Sean, who will discuss the key highlights of the company's performance. Erica will review the business segment and corporate financial results. Following this, Sean will provide closing comments and open the floor questions. Sean?
Speaker 2
Thank you, Steve, and good morning, ladies and gentlemen. Welcome to our second quarter twenty twenty one earnings conference call. I'm very pleased with the exceptional operating results we generated this quarter as we saw continued strength across our businesses. For the quarter, we generated a second consecutive record adjusted earnings per share of $1.38 and segment EBIT of 149,000,000 Adjusted earnings per share was up 79% over the 2020, largely due to strong volumes across all regions, robust unit margins, disciplined operational execution and strong performance in our targeted growth initiatives. The Cabot team demonstrated great operational flexibility in the face of continued COVID restrictions, weather related interruptions and tightness in the global shipping markets.
This operational adaptability was made possible by the extraordinary efforts of our commercial and supply chain teams and the strength of the Cabot manufacturing network. During the quarter, we saw strong volumes in the tire and automotive markets and continued strength in our infrastructure, packaging and consumer driven applications. We are pleased to see that automotive builds and passenger car miles driven have improved, though still generally lag pre COVID levels. On the other hand, truck miles driven are very robust, driving a large replacement tire market. With both automotive and tire markets still expected to be below prior peaks on a 2021 forecast basis, we are optimistic about our growth runway in the coming years.
In the near term, COVID cases remain persistently high in certain regions, particularly across Europe, South America and India. While vaccines are offering promise, the economic recovery will likely remain uneven and challenged to reach its full potential until the public health crisis is fully under control. Raw material prices continue to rise across most value chains and our businesses were no different. We effectively implemented price increases to recover these rising costs, which combined with favorable product mix to drive robust unit margins. Looking at our major segments, Reinforcement Materials generated record EBIT performance in the quarter of $89,000,000 driven by robust customer demand and strong Asia pricing.
Results in Performance Chemicals were up sharply over the prior year with segment EBIT of $58,000,000 compared to $31,000,000 last year as the business drove double digit volume growth in both Performance Additives and Formulated Solutions businesses and benefited from favorable product mix. Overall, I am very pleased with the way we have navigated the pandemic and I believe that Cabot is emerging from the COVID crisis a stronger company. Our global manufacturing footprint and service capabilities and leading product portfolio are increasingly valued by our customers. While the recession of twenty twenty required an intense focus on cost and cash preservation, we continue to sustain our assets and make important investments in sustainability and growth for the long term. One of the most exciting growth investments is in the space of batteries, and I would like to take a few minutes to update you on our progress here.
We are seeing a real inflection point in terms of demand for electric vehicles and energy storage as pressures to reduce greenhouse gases increase. Cabot is well positioned and is supporting this transition with our leading portfolio of highly engineered conductive carbon additives and formulation capabilities. Our business is demonstrating strong growth this year and we expect this will continue into the future. I will start with some comments about the overall market. Lithium ion batteries are growing rapidly and expected to grow at a 25% to 30% compound annual growth rate through 02/1930, with the primary growth driver being electric vehicles as countries establish CO2 reduction goals and accelerate the shift away from internal combustion engines.
Further technology improvements in batteries are a necessary enabler of this transition and the materials industry will play a key role in this pursuit to drive down costs and increase range. Cabot currently serves this market by offering a range of materials and formulations for use in energy storage applications. These materials can be classified into two groups: conductive carbon additives, which include conductive carbon black, carbon nanostructures and carbon nanotubes and non carbon additives, which include products in our fume metal oxides business. Conductive carbon additives are a small part of the battery formulation, but play a very important role. These additives enable electrons to move in and out of the active phase where they're stored during charging and discharging of the battery.
There are two types of conductivity required to make this effective, short range conductivity and long range conductivity. Based on the different shapes and properties of conductive carbon additives, they impart different conductivity performance. For example, carbon nanotubes are more advantaged in providing the long range conductivity, while conductive carbon blacks are more advantaged in providing the short range conductivity. Therefore, is no one single best additive for this application. Having the capability to offer different types of conductive carbon additives and blends of such materials is important in delivering a formulated solution to the customer that addresses their specific needs.
There are a few drivers that distinguish Cabot in the conductive carbon additive space. First, we have an established and unmatched global footprint and application capability to support our customers as they build manufacturing plants around the world. Over the past few years, through the establishment of our Asia Technology Center and the R and D capabilities acquired from the Sanxun acquisition, we have built a leading technical support team. This capability, coupled with a global manufacturing footprint, positions us favorably in the eyes of our customers. Second, through organic and inorganic investments over the past few years, including the recent acquisition of Sanshun, Cabot is the only carbon additive supplier with commercially proven conductive carbon black, carbon nanotube, carbon nanostructure and dispersion capabilities.
This variety of conductive carbon additives enables us to tailor different formulated solutions for our customers and work with them on next generation technologies. And third, Cabot has a rich legacy of innovating and demanding technical applications. Our experience in the CMP market for semiconductors and inkjet has offered invaluable practices and protocols that will be critical for the battery market. In terms of financial performance, we believe that the battery application will become a material contributor to the Performance Chemicals segment over the next few years. The current conductive carbon additives market for lithium ion batteries, which includes both CNTs and conductive carbon black is approximately $400,000,000 in material value.
We expect this market will grow to approximately $1,000,000,000 in value by 2025. Our Energy Materials business is off to a strong start in fiscal twenty twenty one with forecasted revenue of approximately $80,000,000 for the fiscal year. Over the past five years, revenue has grown at a CAGR of roughly 50%, which includes the acquisition of our CNT business in China. While we are making significant investments to drive qualification and further extend our technical capabilities, EBITDA is forecasted to be between 15,000,000 and $20,000,000 in fiscal year twenty twenty one. We are excited about the promise of this emerging application and and we'll continue to focus our efforts to support customers and realize the potential of energy storage.
I will now turn it over to Erica to discuss the financial results of the quarter in more detail. Erica?
Speaker 3
Thanks, Sean. I will start with discussing results in the Reinforcement Materials segment. The Reinforcement Materials segment delivered record operating results with EBIT of $89,000,000 which is up 46% compared to the same quarter of fiscal twenty twenty, primarily due significantly higher volumes across all regions and improved unit margins driven by favorable spot pricing in the Asia region. Globally, volumes were up 18% in the second quarter as compared to the same period of the prior year, primarily due to 30% growth in Asia and 10% higher volumes in The Americas and Europe. Higher volumes were driven by key end market demand that continued to recover from COVID related impacts in fiscal twenty twenty.
Results also benefited from higher margins from continued strong pricing in Asia, which included a second consecutive quarter of price increases ahead of rising feedstock costs. Looking ahead to the 2021, we expect volumes to remain strong. In addition, we anticipate higher feedstock cost flow through in Asia, while fixed costs are expected to be higher due to the timing of planned plant maintenance spending after delayed spending in 2020 and the first half of this fiscal year. Now turning to Performance Chemicals. EBIT increased by $27,000,000 as compared to the 2020, primarily due to strong volumes across the segment and improved product driven by an increase in sales into automotive applications.
Year over year volumes increased by 10% in Performance Additives and 14% in Formulated Solutions, driven by increases across all our key product lines from higher demand levels and some level of customer inventory replenishment during the quarter. Looking ahead to the 2021, we expect overall volumes to remain strong. However, we anticipate demand into auto applications will decrease somewhat due to the semiconductor chip shortage, which will unfavorably impact product mix as compared to the first half of the year. In addition, we anticipate higher fixed costs in the second half of the fiscal year due to the timing of spending. Moving to Purification Solutions, EBIT in the 2021 declined by $1,000,000 compared to the 2020.
The reduced demand in mercury removal applications was partially offset by a reduction in fixed costs resulting from the sale of our mine in Marshall, Texas and the related long term supply agreements. Looking ahead to the 2021, we expect EBIT to improve driven by seasonally higher volumes. I'll now turn to corporate items. We ended the quarter with a cash balance of $146,000,000 and our liquidity position remains strong at approximately $1,300,000,000 During the 2021, cash flows from operating activities were $65,000,000 which included a working capital 20 increase of $80,000,000 The working capital increase was largely driven by growth related net working capital as accounts receivables increased with higher sales and inventory increased from purchases of higher cost raw materials. Capital expenditures for the second quarter were $40,000,000 For the full year, we expect capital expenditures to be approximately $200,000,000 This estimate includes continued EPA related compliance spend and capital related to upgrading our new China Carbon Black plant to produce specialty products.
Additional uses of cash during the quarter included $20,000,000 for dividends. Our year to date operating tax rate was 28% and we forecast our operating tax rate will be between 2729% for the fiscal year. I will now turn the call back over to Sean. Sean?
Speaker 2
Thanks, Erica. We are very pleased with the record results in the 2021 with volumes continuing to recover from the COVID related lows we experienced in fiscal twenty twenty and great execution across the organization. We achieved another record setting quarter in Reinforcement Materials and very strong results in the Performance Chemicals segment. Throughout the first half of the year, I am pleased with how well the team has been executing. Our manufacturing plants continue to operate effectively in the COVID environment to meet the needs of our customers.
Furthermore, we achieved an important milestone on our sustainability journey with the completion of the air pollution control project at our Franklin, Louisiana plant. We continue the integration of our CNT acquisition in China and our investments in inkjet are on track to deliver on the promise of growth in the Packaging segment. And finally, we continue to renew our ways of working to drive more efficient and effective processes through the implementation of digital solutions. I am proud of the Cabot team for their work to strengthen our foundation and establish our platform for sustainable growth. Moving to our current outlook, we continue to see robust and broad based demand globally, including in our key tire, automotive and industrial end use markets.
Our current view is that the underlying demand will remain strong during the second half of the year. Against this demand outlook, we expect some impact from the flow through of higher raw material costs in Asia, moderating volumes into automotive applications due to the semiconductor chip shortage and higher fixed costs as we perform some maintenance and turnarounds that necessary to ensure we can meet customer demand in 2022. Based on these factors, we expect adjusted earnings per share for the full year to be in the range of $4.7 to $4.95 On the cash side, we anticipate our cash and liquidity will remain robust. Net working capital increases driven by a sharp recovery in demand and a steady increase in oil prices should moderate in the second half of the year. We expect to see better conversion of our strong EBITDA into operating cash flow as this happens.
We anticipate operating cash flow for the year will cover our cash needs for capital expenditures and dividends. Our debt to EBITDA ratio was 2.3 times at the March, and we expect this will be reduced further by year end. In closing, I want to thank and recognize our global Cabot team. The strength of our culture and the resilience of our employees has never been more apparent than it has during these challenging times. Thank you very much for joining us today, and I'll now open it up for the question and answer session.
Speaker 0
Our first question comes from David Begleiter with Deutsche Bank. Your line is open.
Speaker 4
Hi, this is David Huang here for Dave. I guess first, can you talk about the cadence of Q3 versus Q4 earnings?
Speaker 2
I'm sorry, you said the cadence of Q3 versus Q4?
Speaker 4
Yes.
Speaker 2
Q3 and Q4 versus Q2, you mean? Yes. Yes. Yes. I think as we commented in the prepared remarks, we're certainly expecting that volumes will remain strong in the second half, though we will we do expect to see some impact in the automotive driven applications due to the chip shortage.
And we also expect that the positive benefit that we saw in Reinforcement Materials in the first half from pricing ahead of the flow through of higher feedstock costs that, that will not repeat as coal tar prices in China moderate. So those two factors will impact the second half. And then finally, we are expecting a higher level of fixed costs in the second half as we catch up on some maintenance and continue to prepare our assets for strong global demand recovery heading into the back half of 2021 and into 2022. So I think those are the major factors. The underlying demand outlook, we expect to continue.
Speaker 4
And I guess just on the second half impact from raw material chip shortage and plant maintenance. Can you probably quantify and break down the three components and roughly how much impact dollar impact from those are expecting in the second half or maybe in Q3 and Q4?
Speaker 2
Yes. Well, I think let me take each of those. I would say, first of all, the chip shortage, about 30% of the sales of the company go into automotive OE applications. So the bulk of our tire business, as you probably know, is replacement tire. But about 30% of the company's sales go into automotive OE applications.
And we're following the updated forecast from IHS as they try to roll through potential impact of chip shortage. And at this point, we see that volumes might be off versus the first half in the five ish percent range. So not that large. Now this is an evolving situation. So we'll continue to watch this closely.
Any moderation in volumes related to the chip shortage in automotive will likely be filled by strong demand in other applications, though there may be a mix impact here. On the raw material issue in Reinforcement Materials, again, price because that market in China is a spot market, we price in a sort of an instantaneous basis there, whereas the flow through of the higher raw material cost tends to lag a couple of months there. And our view is that feedstock costs will likely moderate. That's what has happened most recently. And therefore, the higher costs will flow through.
We expect the flow through of Asia feedstock costs could be about $10,000,000 in a quarterly impact versus what you just saw. And the maintenance activities, the higher maintenance in the back half will probably be a few million dollars higher per quarter than what you saw in the first half. So I think those are the two most significant factors as we manage second half. Thank you.
Speaker 0
Our next question comes from Mike Leithead with Barclays. Your line is open.
Speaker 5
Great, thanks. Good morning, guys, and congrats on the quarter.
Speaker 2
Good morning, Mike.
Speaker 5
Guess, first, you spent a bit more time this quarter talking about the battery opportunity for Cabot. I guess two things there. One, if the market does grow 25% to 30% CAGR over the next decade, like you talked about, Is there a reason Cabot's business should grow meaningfully better or worse than that? And two, I think you talked about low 20% EBITDA margins for the business this year. As the market grows over the next few years, would you expect that margin to come down?
Or do you think that's a pretty sustainable margin level?
Speaker 2
Yes. Yes, Mike, we're we continue to be excited about the opportunity in batteries. And as you know, we've been building our position here over the last few years. And I think putting up some real positive proof points here. Now if you look at our market share today, it would be in and around 20% at current market size.
And if you think about our expectations here, we'd certainly expect that the market share would over time would be in the range of where our specialty carbons market share is, which is in the 25 ish percent range. Though our aspiration here is to be as big and material as we can be. And we feel very good about our product portfolio. We think we have a unique product portfolio when you look across our range of specialty carbons, carbon nanostructures and CNTs as well as blends and dispersions of those. So we think that and the global footprint that we have, both in terms of assets as well as sales, technical service, application development labs to support our customers that that's a unique and compelling value proposition.
So we're certainly going to play to win here because because we think this is going to be a really big market. But hopefully that gives you a sense for where we are, kind of what we would see as our minimum expectations, but we're certainly striving for more and to play to win here. Guess the second question around margins. I think this market right now is growing very quickly. And I think we'll continue to have a certain amount of investment in new development programs as well as technology platforms because this market will definitely evolve over time in terms of needs.
But we think the materials space, and in particular, participation in the role of conductive carbon additives, is pretty important to the battery and relatively small in the overall formulation cost. So we think the performance versus percentage of the cost stack is pretty compelling and therefore should allow us to sustain the margin levels that we've talked about.
Speaker 5
Great. That's helpful. And then relatedly, I think in the release or on this call, you talked about improving cash flow conversion as we move to the back end of this year with the working capital build behind us. I guess, how are you thinking going forward about priorities of excess cash flow currently, whether it's further investment either bolt on or organic in battery materials or in carbon black or whether it's just returning some of that excess cash to shareholders going forward?
Speaker 2
Yes. So in terms of the cash flow conversion, you're exactly right. And certainly, and if you look at the back half of last year, we had a significant release of working capital. And now with the growth in the business and higher oil prices, a certain build back, but we would expect that to moderate as growth rates begin to converge around the more normal level of growth in these underlying applications and oil prices stabilize. And so that should lead to higher conversion of EBITDA to operating cash flow.
In terms of capital allocation priorities, they really haven't changed. We believe in a balanced approach of reinvestment in compelling growth opportunities for the company and cash return to shareholders. And over a longer period of time, we have a capital allocation framework of about fifty-fifty, where about 50% of our discretionary free cash flow would be reinvested in high growth projects and about 50% return to shareholders with a foundational piece being the dividend, which is we believe is important here. So I think that's our long term frame, and that hasn't changed. We are sitting here with some compelling growth opportunities in front of us, whether it's in Energy Materials or things like converting our carbon black plant in China to specialty carbons, things like that, that we think are the right investments for the long term and will be good for shareholders.
So we're going to stay on track with those. So I think the hierarchy here is we're committed to the strong dividend. We have really compelling growth opportunities that we want to continue to pursue. And then to the extent that there is excess cash, then we will consider share buybacks.
Speaker 5
Great. Thank you.
Speaker 0
Our next question comes from Kevin Hocevar with Northcoast Research. Your line is open.
Speaker 6
Hey, good morning, everybody.
Speaker 2
Hey, Kevin.
Speaker 6
I was hoping to dig in a little bit into the profitability of the Reinforcement Materials business. Because if we look if we forget about 2020, but if we kind of compare 2Q twenty twenty one to 2Q twenty nineteen, overall volumes are still down versus those levels, but the profitability is substantially higher. I think if I understood the comments correctly, it sounds like maybe $10,000,000 of that was timing of price rise in China. But even still, it seems like the profitability of the business is up a lot over a call it two year period despite having lower volume. So could you help me understand what are some of the other moving pieces in there?
And how sustainable have the margins reset higher? Or how sustainable is the profitability of the business at these levels?
Speaker 2
Yeah. So good morning, Kevin. So in terms of you're right. I think if you sort of look through 2020 and you compare 2021 to 2019, I think what you see from a volume standpoint is that the first half of our year volume levels are pretty comparable to 2019. So I would say they're in and around the same zone.
But the difference in profitability is largely driven by pricing, both in terms of our annual agreements. So those in 2019 and 2020, those resets that took place are still there as well as strong Asia spot pricing in 2021. And while there is, as you just noted and as we commented, some impact from just the pricing versus flow through timing and the benefit of that in the quarter, the underlying Asia spot prices are quite strong relative to that 2019 period. So those are the two biggest drivers. Now in terms of sustainability, I think you want to look at both the contract markets as well as the Asia spot markets.
I would say on the contract side, I think a couple of factors at play here and no real changes from our perspective. The supply demand fundamentals remain favorable both in The Americas and Europe and with no capacity additions expected in these regions combined with steady recovery in tire and automotive end markets. I think the outlook remains positive for our ability to further move prices. I think the other factor at play here is the one we've been talking about for a long time with our customers, and that is our costs. And those of our competitors are going up driven by the higher environmental and regulatory costs.
And so in order for us to support customers in a sustainable way, we definitely need to earn a fair return on these. And so in order to do that, pricing is necessary. So I think those that story really hasn't changed and our assessment of the supply and demand situation hasn't changed. On the spot pricing in Asia, of course, as you know, this is a spot market, especially China and Southeast Asia. And those markets are very, very strong right now.
China GDP continues to grow nicely. And I think the fundamentals for robust demand remain quite good there. And our long term investment thesis around China is that they make close to 40% of the world's tires. The car park is maturing and really beginning to penetrate its replacement cycle. And then the long term outlook on feedstock costs are that given that virgin steel production is kind of peaked and beginning to come down, that means that coal tar availability over time will become more and more scarce, putting a floor on pricing.
So we think that long term view on China remains, and we're, therefore, very positive about China. Now it is a spot market. And quarter to quarter, things can be a little more dynamic. But our outlook on China, it remains a very important market for us and for the tire industry, and we believe those fundamentals remain intact. So I guess that's how I'd think about it, Kevin.
Speaker 6
Okay. Very helpful. Very helpful. And in terms of on the Rubber side, what type of utilization rates are you guys operating at? And how do you see that going forward into the later parts of this year and into next year?
Speaker 2
Yes. I mean, demand is very strong right now. And so therefore, rates are pretty high right now, in the high 80s, close to 90% in the most recent quarter. And with demand outlook continuing to be favorable, I would not expect those to move in any material way, particularly in the more mature markets of The Americas, Europe and even North Asia. And the markets that can move around a little bit are China and Asia South.
But on balance across our network, the whole circuit of plants is running in that sort of high 80s, close to 90%. And I don't see any material change there, some big demand surprise that we don't see at this point.
Speaker 6
Okay, great. Thank you very much.
Speaker 0
Our next question comes from Laurence Alexander with Jefferies. Your line is open.
Speaker 7
Hey, guys. It's Dan Rizzo on for Laurence. How are you?
Speaker 2
Hey, Dan. How are you?
Speaker 7
If we think about the Chinese spot markets, would they ever or would you ever go to annual contracts? Is that something that haven't been more mature markets? I was just wondering if there's a dynamic that would set up for that there just given how volatile it can be at sometimes.
Speaker 2
Yeah. Good question, Dan. I mean, think over time, that is likely the direction it goes in. But the market is more fragmented, I would say, number one, on the supply side. And then there's a quite diverse range of quality needs in the market and a diverse range of producers.
I would say as markets mature naturally, quality levels move up. And while there's always a tiering of in the tire market, Tier one, Tier two and big box store tires, you always have customers across that preference spectrum. I would say, in general, requirements move up over time, which leads to generally some sort of consolidation and strength around the better players. I think the second thing I would say is as growth rates moderate, normally there's some consolidation as scale and efficiency become more important to earn good returns in slower growth market. And China is still high growth relative to other options in the world, but down off of a long stretch where it was growing in the double digits range.
And so I think that naturally would lead to that. And then finally, I think environmental pressures and ability to add capacity over the long term, China seems to be on a path of better environmental stewardship. And if that happens, then I think that sort of leads to higher quality players gaining strength. So I think as the supply the supplier set changes over time to adapt to the more mature market in China, then I think contracts become potentially more valued by customers. But over the long period of time here, they've had plenty of spot options to go after and therefore the need for them to contract has been lower.
I think that balance will change over time, but not likely not in the short term.
Speaker 7
Okay. That's actually that's very helpful. Thank you for the color. And then I was just looking at the conversion you're doing from Plastic from Rubber Black to Specialty Black. I was just wondering what the cost and timing goes in flat because if we can expect more of that going forward, just given the different dynamics in the tire market versus some of your other more specialized, I guess, higher margin markets?
Speaker 2
Yes. Yes. So maybe just a quick recap on that one. So you'll probably recall that we purchased this plant from Nippon Steel. They had a carbon black plant in China.
And so we purchased this for actually a little less than $10,000,000 so a pretty favorable acquisition, always with the intention of converting it to produce specialty carbons. And so that conversion is underway. And when we look at the acquisition cost of the plant plus the conversion, we feel that's a compelling tranche of capacity to support Specialty Carbons growth. The conversion CapEx is in and around $50,000,000 and that will be up and running in 2022, so next year. In terms of impact on the supply demand in the rubber blacks markets, I would say not really a relevant issue because the plant was relatively small when we acquired it, and it's been going through conversions right now.
So in the grand scheme, no real impact on the supply demand fundamentals for Rubber Blacks, and it will give us capacity in our global specialty carbons network to support growth in a whole range of applications, including as we build out Energy Materials.
Speaker 7
All right. Thank you very much for the color.
Speaker 0
Our next question comes from Joshua Spector with UBS. Your line is open.
Speaker 8
Hey, guys. This is Lucas Beaumont on for Josh. Just wanted to touch on inventory channel inventories in Reinforcement. I know that you didn't call out any restocking benefit in the quarter. Do you have any visibility into where inventories are at this point?
Are they sort of above or below normal? And do you expect any restocking benefit in the next couple of quarters?
Speaker 2
So I think this is a popular question, I'm sure, in earnings season right now. I think when we think about restocking, we try to understand the differences between passenger car tire demand, truck and bus demand and off the road tire demand, as well as the difference between OE tires and replacement tires, which as you know is a much larger part of the business than OE. So while there has been some impact in tires from the global chip shortage on the OE side as it relates to OE tires, we've seen continued really strong demand for replacement tires because freight miles remain very strong globally. And passenger car miles have recovered to twenty nineteen levels in certain geographies. So I think this coupled with pretty low inventories in the chain has meant that many of our customers, I think continue to just directly fulfill orders rather than rebuild inventories in the replacement market.
That's the sense we have. As we talk to customers, they tell us that they continue to work hard to catch up to the orders they're receiving from their distribution partners on the replacement side especially. I think on the OE side, visibility remains challenged given the continued chip shortage and the global transportation challenges, which are causing issues on component supplies in general into the automotive market. And so while that might not be there may not be a specific constraint in the tire market, if they're short of any components, then they won't be able to build as many new cars. So we think about it through those different layers.
But I would say the general sense in the replacement market, which is again the much bigger part is that customers are really working hard to catch up and directly fulfill orders rather than building inventory stocks.
Speaker 8
Great. That's helpful. And then just on the updated guidance, just wanted to touch on if you had changes to your tax rate assumptions or anything else that's below EBIT that would be impacting the second half, please?
Speaker 2
Yes. Why don't I ask Erica to take that one. Erica?
Speaker 3
Sure. So for the tax rate, we had previously guided a range of 28% to 30%. And now we're guiding 27% to 29%. So a bit below the last given the strength of the earnings and the forecasted geographical mix of earnings. So that has changed.
I'd say other assumptions is we forecast foreign exchange rates to remain generally in line with the current levels. And we usually use looking at a forward curve in terms of oil and feedstock prices, is what we've also used.
Speaker 8
Great. Thank you.
Speaker 0
Our next question comes from Chris Kapsch with Loop Capital Markets. Your line is open.
Speaker 9
Good morning. For Good morning, Chris. Your Yes, framing up the opportunity addressing batteries into the EV space. Just curious about your visibility into future platforms designs, given that I follow that end market pretty closely and clearly there's an accelerated demand ramp over the next few years as you pointed out. So just curious if where do you get specked in?
Is it at the battery level? Is there any instances where you're talking to the OEs? Is the confidence level over that? And if you curious if that's the confidence if that contributes to confidence in maintaining this market share? And then, if you roughly triple your business by 2025 by maintaining or growing share a little bit, does that are you going to need investment in capacity?
Speaker 2
Yes. Yes. Thanks for the questions, Chris. And so maybe just to start, so our customers are the battery OEs rather than the automotive producers. We work directly and sell directly to the battery OEs.
Now the lines are beginning to blur a little bit as you see many automakers make investments in battery producers. But that's the general structure today, as you know well. Again, some blurring of the lines as you see those investments being made by carmakers. And probably the most prominent one is certainly Tesla. While they have a battery partner or partners today, they've been on record as wanting to have their own internal battery capacity as part of their solution.
So that continues to evolve, we're staying close to that. I think the markets over time or the products will evolve, technology will evolve. At this point, lithium ion batteries in their current chemistry, I think, will have a good growth run here. But over time, will be shifts and having a strong incumbent position is generally important so that you're working with customers during these technology shifts. And so I think our building position will hopefully help us there.
I think probably the most talked about technology change that could come in batteries is moving from current chemistry to what are called solid state batteries. They're thought to be safer and higher energy density than conventional lithium ion products are today for a couple of reasons. One is solid state allows materials like metallic lithium as an anode, which might significantly increase the energy density. And then also solid state batteries won't have liquid electrolytes that are susceptible to thermal runaway. And that has been a challenge for the industry, although it seems more under control now.
So they're thought to be safer. But solid state batteries will use either a ceramic or a polymer as the electrolyte, neither of which is conductive. So theoretically, state batteries will need even more conductive carbon additives in the overall formulation. So look, there are still many challenges with solid state battery and the market view is that the technology is still many years out, but we continue to stay on top of it. And again, if you have an incumbent position with the leading battery makers, then you're going to be part of their development efforts as technologies change here.
I think the second part of your question was just around outlook here. And so the market is growing quickly. We're building our share position. Our expectation is that there's more share runway to, at a minimum, get to our natural specialty carbon share. But with our strong portfolio and global footprint here, we have higher aspirations than that, and we're going to play to win here.
In terms of the capacity, I think you had a question about that. And so a couple of things. Yes, over time, there will be capacity additions required. You might recall when we purchased Sanshun, we said that the utilization rate was around 50%. So there was untapped capacity there and we'll continue to fill that out through market growth.
And then obviously, we always look for improvement opportunities in terms of efficiency, debottleneck things to squeeze out more. On the Conductive Carbon Black side of the portfolio, this conversion of Steujo is important because it adds capacity into our specialty carbon network, which then allows us to rebalance things so that we can continue to support growth in the conductive carbon additives for batteries. So for sure, something that will continue to evolve, but we feel good about it, and we'll always be looking at our network for the most efficient way to add capacity to support this growth.
Speaker 9
Thanks for that, Sean. And as my follow-up, as we think about the automotive OEs accelerating their transition away from the internal combustion engine to EVs, there's implications obviously for Carbon Black both in tires and other applications. Have you recalibrated on what you think the net effect of all that is? Because in the past you said sort of net neutral with maybe sturdier, heavier tires being beneficial to carbon black loadings, but there's some under the hood applications that go away. So any way to think about recalibration of the net to carbon black industry from that transition?
Thanks.
Speaker 2
Yes. Our view still remains the same there, Chris. And so pretty much all of the applications in specialty carbons that go into the car won't really change with the pivot to EV. So the windshield still needs to be bonded with structural adhesive, the same with the body parts, the finished coatings, all of that. So no real change.
I think where some of the underhood rubber hose type applications would be impacted from the conversion to EVs. When we look at it in total for Cabot, our sense is that it's sort of neutral to positive for us. I think what will likely happen in the tire side of the business is as EVs proliferate, you'll start to see tire makers designing specifically for the performance needs of the electric vehicle. And because the weight and torque is very different and therefore the performance needs will need to be addressed. That's beginning to emerge and certainly we'll stay close to our tire partners here in their development efforts and we'll continue to look for ways to exploit our elastomer composites or E2C technology here, because ultimately I think there is a play for new formulations in for tires for EVs, but that's still probably a little ways off.
Speaker 9
Thank you.
Speaker 0
There are no further questions. I'd to turn the call back over to Sean Cohen for any closing remarks.
Speaker 2
Great. Well, you very much for joining us today, and thanks for your continued support of Cabot, and we look forward to speaking again next quarter. Have a great day. Thank you.
Speaker 0
Ladies and gentlemen, this does conclude the conference. You may now disconnect.