Celanese - Q2 2024
August 2, 2024
Transcript
Operator (participant)
Greetings and welcome to Celanese's second quarter 2024 earnings call and webcast. At this time, all participants are in a listen-only mode. A brief question-and-answer session will follow the formal presentation. If anyone should require operator assistance during the conference, please press star zero on your telephone keypad. As a reminder, this conference is being recorded. It is now my pleasure to introduce your host, Bill Cunningham, Vice President of Investor Relations. Thank you. You may begin.
Bill Cunningham (Head of Investor Relations)
Thanks, Diego. Welcome to the Celanese Corporation second quarter 2024 earnings conference call. My name is Bill Cunningham, Vice President of Investor Relations. With me on the call are Lori Ryerkerk, Chairman of the Board and Chief Executive Officer; Scott Richardson, Chief Operating Officer; and Chuck Kyrish, Chief Financial Officer. Celanese distributed its second quarter earnings release via Business Wire and posted prepared comments on our Investor Relations website yesterday afternoon. As a reminder, we'll discuss non-GAAP financial measures today. You can find definitions of these measures, as well as reconciliations to the comparable GAAP measures, on our website. Today's presentation will also include forward-looking statements. Please review the cautionary language regarding forward-looking statements, which can be found at the end of both the press release and prepared comments. Form 8-K reports containing all of these materials have also been submitted to the SEC.
With that, Diego, let's please go ahead and open it up for questions.
Operator (participant)
Thank you. We'll now conduct our question-and-answer session. If you would like to ask a question, please press star one on your telephone keypad. A confirmation tone will indicate that your line is in the question queue. You may press star two if you would like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star key. Our first question comes from Josh Spector with UBS. Please state your question.
Michael Sison (Analyst)
Yeah, hi, good morning. So I wanted to ask on some of the moving pieces within Engineered Materials. I mean, obviously, nice to see a good step up here in the second quarter, but I think there's been a constant debate around, you know, where the market is and what's stable and in your control versus what needs to have a market improvement. So I guess when you look at your expectations about the improvement into 2Q, or sorry, into 3Q, and maybe a stable second half, what are you assuming behind the markets to get there versus cost savings in your control? And given all the cuts we've made to expectations, is this kind of the point where you feel like you're now conservative enough, or are there other things that you would have us watch out for? Thanks.
Lori J. Ryerkerk (Retired)
Good morning, Josh. Thanks for the question. If we look at our Q3 guidance, I would say we're generally expecting things to be unchanged in terms of overall market conditions. We do expect a little bit of growth in auto builds in the second half, particularly in China, which I think is consistent with what others in the industry are seeing. But generally, everything else is pretty stable. We're not expecting a lot of downturns. That said, we do continue to expect some moderate growth in our volumes based on the strengths of our product pipeline. We also expect some continued growth in margin based on synergy pull-through and also pull-through of lower-cost raw materials in inventory.
So I would say, you know, we don't need market improvement, I guess maybe other than that little bit in auto in order to achieve our second half outlook from an engineered material standpoint.
Michael Sison (Analyst)
I guess just within the auto side specifically, considering that's been an area of kind of weakening demand, is it specific new platforms on certain cars that has driven it? Is it regional with Asia? I guess what gives you the confidence there specifically?
Lori J. Ryerkerk (Retired)
I think a lot of it is the work around the integration. You know, we now have access to customers with Celanese materials that we previously didn't have because of the contacts that our Heritage DuPont had, particularly in non-China parts of Asia. And similarly, we have some outlets for some of the Heritage M&M materials that we didn't have before. And I think it's really, again, the project pipeline. I mean, we've been working now for, well, for a long time, but with the entire portfolio for 18 months to really identify those new customers, those new orders, those new areas within existing customers, and make sure that we're strong across all the platforms in auto, ICE, Engineered Materials, and hybrids. You know, we called out last quarter earnings.
In fact, some of the applications we're getting on EVs with nylon, which is, which is an area where DuPont didn't necessarily play.
Michael Sison (Analyst)
Understood. Thanks, Lori.
Operator (participant)
Our next question comes from Mike Sison with Wells Fargo. Please state your question.
Michael Sison (Analyst)
Hey, good morning. In terms of the fourth quarter versus the third, it does look like you'll need some improvements sequentially. Is at the midpoint a lot of that within your control, some of the factors that you've talked about in the past?
Lori J. Ryerkerk (Retired)
Yeah, you know, if you do the math, you would expect that we need some additional lifts in the fourth quarter. I would put it down to a few things. We, you know, it should be our largest quarter of synergy capture. For the engineered materials, we should start seeing more of a full-year run rate on Clear Lake as we'll have gotten through all the effects of the supplier outages and a little bit from Hurricane Beryl in the third quarter. So that will be an uplift there. I would also say, you know, our mix has changed. So, you know, with the acquisition of M&M, we now have a higher presence in China. And so we wouldn't expect as much seasonality now in the fourth quarter as we've typically seen with the Heritage Celanese portfolio. So all of those things come together.
You know, we're again, we're not other than this little bit of uptick that's being predicted in auto. We're not really expecting material conditions to change. So it really will be the result of kind of the self-help, the, the activities that we've undertaken over the last 18 months.
Scott A. Richardson (President and CEO)
Yeah. The one thing I'd add to that, Mike, is, is the work we're doing in the commercial organization, in the engineered materials business. You know, we, we integrated the commercial teams, in the early part of Q2 last year. And, you know, the average length of time that projects sit in our pipeline is about 18-24 months. So we're really coming up on that kind of first 18-month plateau here at the end of this year in the fourth quarter and going into next year. And, and, you know, given kind of the trajectory we've seen on, the success of the volume lift from Q1 to Q2, we're really starting to see the benefit of that model play out, with bringing M&M into that EM business.
And so, you know, you do have a little bit of an element of that as well from how we see the pipeline developing at the end of the year.
Michael Sison (Analyst)
Right. And a quick follow-up. You know, the macro hasn't been very helpful for you and chems in general. So if things get worse sequentially into the second half, you know, what changes can you make to sort of hit this range? And then, you know, how do you sort of help us think about, you know, 2025 and the ramp-up potential of earnings the earnings profit Celanese longer term?
Lori J. Ryerkerk (Retired)
Yeah. Look, it's things can always get worse, right? And we've seen that. But I would also say, you know, things, things have been certainly very challenging this year. And the results that we're delivering this year are really based on, you know, the remarkable efforts of our teams and their ability to innovate, the resilience that they've shown, and really, you know, looking under every rock for sources of value. So if it gets worse, that will continue. I would say, you know, Europe for all practical measures has been in a near recessionary kind of condition. So, you know, we think it's going to be stable based on what we can see in our order books right now, certainly for Q3. As we go into 2025, you know, we will continue to have self-help, which will help lift us in 2025.
I think if you look at 2025, we can think about, you know, the run rate that we'll see in the second half of the year continuing through 2025. Then we'll have another tranche of M&M synergies on top of that, as well as full productivity from Clear Lake next year and probably some additional interest rate benefits as well. So I think, you know, the things that we've seen this year will continue to compound into next year and raise the 2025 results. But it's, you know, frankly, it's just too early to tell what the fundamental economic conditions are going to be in 2025 yet.
Michael Sison (Analyst)
Thank you.
Lori J. Ryerkerk (Retired)
Thank you.
Operator (participant)
Our next question comes from Michael Leithead with Barclays. Please state your question.
Michael Sison (Analyst)
Great. Thanks. Good morning, team. A few questions on the Acetyls force majeure. I guess first, are we still in force majeure, and when do you expect to fully resolve these disruptions? Two, should we think about any insurance proceeds or any sort of restitution for you guys from these disruptions? And then finally, apologies if I missed this, but what is the all-in expected cost impact from this outage?
Lori J. Ryerkerk (Retired)
Thanks for the question, Mike. We are still in Force Majeure. The units, obviously are restarted, running well. But it is a longish supply chain in the Western Hemisphere. So we're in Force Majeure till we can reestablish those supply chains into Europe, which is the work going on currently. But we fully expect that we'll lift the Force Majeure sometime in this quarter. In terms of restitution, you know, we're really just focused right now and have been focused in the second quarter on, you know, working with our suppliers to understand, you know, what the issues were, how we could get through them more quickly, how to address reliability issues going forward, how to make sure that we maintain really good relationships. You know, that's really been our focus now. And, you know, we'll have discussions about any form of restitution later.
Michael Sison (Analyst)
Okay. I'm sorry. And then just in terms of all-in cost impact?
Lori J. Ryerkerk (Retired)
Oh, I'm sorry. I just missed it. Yeah. So we, you know, this, this quarter, second quarter, I would say was about $35 million. And then next quarter, we'll see another $5 million-$10 million.
Michael Sison (Analyst)
Okay. Great. And then I just wanted to follow up on some of the competitive dynamics in your product. I think in the remarks, you noted commodity nylon is below the cost curve. There's been some opportunistic pricing, if you will, in some other areas. I guess what is your best kind of judgment about where we stand today? Are we still atrophying in price in some of these areas? Are we stabilizing, or have we started to recover here?
Lori J. Ryerkerk (Retired)
As you called out, Mike, I mean, we definitely saw price pressure on nylon raw nylon polymer this last quarter. It has definitely gone down, and it's affected some of the margin uplift we expected from pull-through. That said, I think this really points out the benefit of the strategy we took, though, to shut down standard grade polymerization at Uentrop, and really be able to give ourselves flexibility in terms of where we choose to source raw nylon polymer and, you know, compound it for our customers. So, you know, that's really paid off. We would have seen more of a hit this past quarter if we hadn't done that.
I would say on the other products, not as much pricing pressure as margin pressure as we've seen some increase in raw materials, especially think about, POM, where we've seen some increase in ethylene. So I, you know, those being the two biggest, I would say, again, nylon, it's price, but mitigated by the steps that we've taken. POM, we've seen pressure on ethylene pricing.
Michael Sison (Analyst)
Great. Thank you.
Operator (participant)
Our next question comes from Jeffrey Zekauskas with JPMorgan. Please state your question.
Jeffrey Zekauskas (Analyst)
Thanks very much. Were the outages at Clear Lake caused by anything else other than carbon monoxide difficulties? Was there some other source of inefficiency in the quarter?
Bill Cunningham (Head of Investor Relations)
Yeah. Thanks for the question, Jeff. Yeah. With the suppliers that we have, and we've talked about multiple suppliers, you know, was really around several different raw materials that we source.
Jeffrey Zekauskas (Analyst)
Several. So it's a wider issue than CO?
Bill Cunningham (Head of Investor Relations)
Yeah. We're not talking about the specific materials, Jeff. I mean, at the end of the day, we talked about acetic acid, and we buy several different raw materials for that.
Jeffrey Zekauskas (Analyst)
And then secondly, can you talk about your preference as to whether you would sell acetic acid or you would sell VAM in the current environment? How can you compare the profitability of those two chemical outputs?
Bill Cunningham (Head of Investor Relations)
Yeah. Honestly, Jeff, it, it really does fluctuate week to week, region to region. You know, we are looking at kind of where the different, you know, markets are at and kind of where they're trending, based upon kind of where the, the fundamental supply-demand dynamics are. You know, that is, is going to be kind of one way in, in one geography, for the first part of the quarter and, and maybe a little different. I, I would say in general, we tend to be pivoting more, as we talked about last quarter, in Asia more further downstream. We've seen more opportunities, in our emulsions as well as our redispersible powders business, to be able to grow in some of those areas.
We talked in the prepared comments about some kind of substitution that we've been successful driving there with the expanded capacities that we have. In addition, with those expanded capacities, we've been able to really work with our customers in India specifically to kind of help develop that market and really start to drive there. That has been a nice growth area for us, more on the Asia side. I would say it's a little more balanced than where we're selling in the Western Hemisphere.
Operator (participant)
Great. Thank you. Our next question comes from Ghansham Panjabi with Baird. Please state your question.
Ghansham Panjabi (Analyst)
Hey, guys. Good morning. Lori, I just want to go back to my usual question on the sort of the macro pulse. You know, obviously, your volumes have been weak for several quarters. But just based on your sense as we spin around the world, do you feel like the macro is relatively stable on a consolidated basis, or is it just your own initiatives that are masking, you know, what is otherwise a sequential deceleration? And I'm just asking because obviously the data in China is very poor. Commodity prices have pulled back, including oil, etc., more recently. So on a real-time basis, what are you seeing?
Lori J. Ryerkerk (Retired)
On a real-time basis, Ghansham, I would say stable is the right word. You know, again, I'll go back to auto. Auto actually has been a little stronger in the U.S. and Asia. Europe has weakened year-over-year. But globally, auto has been pretty stable. And, you know, we do see, especially in China, some further strengthening, in the second half. You know, consumer and electronics, again, pretty stable globally. But in our own, own portfolio, because of what we've been able to do through the project pipeline and, you know, the good work by our teams on the ground, you know, we are starting to see some growth in consumer and electronics. We've had strong Q-over-Q growth in medical implants, which is a little bit, you know, unique to us, and, and as expected.
You know, we really are not seeing destocking, you know, the cadence and consistency of our orders. You know, it continues to improve. We've got a few% growth from that. You know, really, I would say overall, I'd call the market stable, but we're starting to see a little bit of volume growth in Engineered Materials anyway, just because of the project pipeline and the revenue synergies, etc. I think in acetyls, you know, again, stable is the right word. It is just constant, it is stable for construction, paints, and coatings, specifically that sector, at a very low rate. You know, we thought we'd start to see some seasonal uptick there. We have not seen that in the second quarter, and we're not anticipating it now for the third quarter as well.
And I think that's true for all regions. You know, but to put it in perspective, you know, for the company as a whole, I'd say remind you that, you know, 25% of what we make is auto. And auto's been stable to slightly up this year. Everything else is, you know, less than that. So we're really seeing the value, I think, in our portfolio of the diversity of our portfolio and the ability that has to help us stabilize earnings and find pockets of improvement.
Ghansham Panjabi (Analyst)
Okay. Fantastic. Then for my second question, in terms of free cash flow, I mean, you guys have, you know, been very efficient in pulling levers to kind of protect free cash flow throughout this, the challenging volume environment. Is there anything for 2025 that we need to keep in mind as it relates to the bridge, you know, 2024 versus 2025, that you're benefiting from this year that may not repeat next year?
Lori J. Ryerkerk (Retired)
Chuck, you would take that.
Chuck Kyrish (SVP and CFO)
Yeah. Ghansham, you know, I would say actually there are a couple of things in our components of our Free Cash Flow in 2025 which will get better.
Ghansham Panjabi (Analyst)
Mm-hmm.
Chuck Kyrish (SVP and CFO)
You know, it's a very heavy year for cash tax, as I've tried to talk about a lot and explain. Cash tax will be significantly lower next year. Our cash interest will continue to drive lower next year as we, as we, you know, pay off our debt. I don't see our CapEx changing materially while, while we're here in our deleveraging phase, right? So we've done a lot of work on, on our inventories as well. So there's actually a few things next year that will be built in, cash positives, versus 2024.
Ghansham Panjabi (Analyst)
Okay. Thanks so much.
Operator (participant)
Thank you. Our next question comes from Arun Viswanathan with RBC Capital Markets. Please state your question.
Arun Viswanathan (Analyst)
Great. Thanks for taking my question. So, just going back to that force majeure comment, so sounds like, 30, maybe 40-45 for the, the full year, which is, maybe around $0.35 or so on the EPS line. So if you think about the reduction, the remaining reduction, maybe $0.65 at the midpoint, how'd you think about that, between price and volume and many, any other factors, I guess, driving that, reduction?
Lori J. Ryerkerk (Retired)
Yeah. I would think about it really in four buckets. You know, so the first bucket is what you called out, the $45 million or so associated with our supplier issues this year. You know, there's probably another $40 million on top of that of Clear Lake productivity because of the timing of when all this happened relative to our startup, etc., that $100 million of productivity, we won't get. There's about $40 more of that. So, you know, that's about half of that, of that step up that we would expect have expected to get to foundational earnings for in that dollar. And then, you know, the other part of that, sorry, I'm thinking about $25. Let me back up. So for your question, which is really about the dollar, we went down.
You know, again, it's the same, but so we have about nearly half of it is coming from that. Then we have, I'd say, you know, the issues we're having around construction, paints, and coatings. And it, it's really more there a question of, of margins, in the Acetyls business. And then on the EM side, which is the third bucket, it is really the question of, what are we able to pull through on raw materials? Because as we've talked about with POM, margins being compressed and nylon margins being compressed, but, one because of raw materials, one because of pricing. You know, we had said we may get as much as 150 pull-through in, of lower raw materials. We're probably only going to get about half of that this year. So I, I would think about it that way.
Arun Viswanathan (Analyst)
Okay. That's very helpful. And, I guess you're answering my other question, there a little bit as well. So just as you think about 2025, then which of those factors kind of come back to you? It sounds like maybe half of that. And then on top of that, how much do you expect from synergies and deleveraging, as you look into 2025? Thanks.
Lori J. Ryerkerk (Retired)
Yeah. So when you think about 2025, you know, as I said, you know, the runway we see in the second half, I think, is a good indicator as a base for 2025. And then you think about, you know, we also, of course, in the second half, we will get the majority of that, Clear Lake supplier issues will have been cleared off. We'll start getting some more productivity. So if you look forward, I would think about synergies. You know, we will definitely have a good time for synergies next year, similar to what we've had this year and last year. And then, you know, we should have a little bit of additional help from turnarounds as well. And then, of course, we have some additional help from interest rates.
Arun Viswanathan (Analyst)
Thanks.
Operator (participant)
Our next question comes from Vincent Andrews with Morgan Stanley. Please state your question.
Vincent Andrews (Analyst)
Thank you. Lori, could I ask you on the acetyl chain? You know, you noted that the Clear Lake outage, I think you said, was the biggest one you've had in 15 years. And obviously, it didn't lead to the market improving. So as you bring Clear Lake back up, are you making any adjustments to production anywhere else, or do you think that the market's going to be able to absorb the resumption of production, even as we kind of come out of what usually is the seasonally stronger period of the year?
Lori J. Ryerkerk (Retired)
You know, Vincent, it's hard to say. I mean, we make adjustments all the time to our production. And, you know, so we'll continue to look at that. I mean, it's a call that happens daily, just about, in the acetyl teams, what we should be making where based on where the markets are going. So I, you know, I don't see this necessarily changing it. You're right. We didn't see much price response with the shutdown, or, you know, with the loss of production during that time. But I think that just reflects how really weak the demand environment is for construction and coatings. Scott? Do you have something?
Scott A. Richardson (President and CEO)
Yeah. I mean, how I would add to that, Vincent, is it's kind of going back to what we talked about earlier. We're constantly looking at matching rates with where that demand is and where we can maximize that really on a weekly and monthly basis. And, you know, assuming that we are able to get back the key raw materials where we had multiple suppliers that had issues on that, then it's going to give us the ability to have that optionality to kind of operate the chain as we normally do. And so, you know, we're rebuilding our inventories now and getting that flexibility back and to be able to get that flex, which is just going to kind of depend, you know, kind of where things are from month to month.
Vincent Andrews (Analyst)
And then if I could just follow up, also in the prepared remarks, you made some comments, Lori, about the new assets in China that have started up and that, you know, obviously, that's incremental supply that hasn't been absorbed. But what I was trying to square was, you said that the supply seems to have stayed largely in Asia and that European exports or exports to Europe are down 40% over the last 12 months. So I just wanted to understand, is that saying that, you know, that excess product that's come out of those Chinese facilities is just sort of weighing only on the Asian market, but they've also actually taken product out of Europe? Or I just didn't understand why the European exports had come down.
Lori J. Ryerkerk (Retired)
Yeah. I think if you just look at the low margins that are associated right now, I mean, you know, China has been basically at the cost curve. So although these new units have started up and they may be slightly advantaged, you know, that given the low demand in China, especially in some of the areas like construction, but also EVA, where we've seen quite a downturn here recently, you know, that material, quite frankly, it's more affordable for them to ship it and put it in other parts of Asia than necessarily to get it to China. So I think it's the economics of taking that demand into Asia, which has left, you know, the channel to Europe, more in to the US.
Operator (participant)
Okay. That makes sense. Thanks very much for the clarity. Our next question comes from Kevin McCarthy, Vertical Research Partners. Please state your question.
Matthew Hettwer (Analyst)
Hi. This is Matt Hewer on for Kevin McCarthy. In the prepared remarks, you mentioned the potential for targeted divestiture opportunities on the same scale as Food Ingredients. Would you consider looking at your other JVs there, maybe something along the lines of the Fairway Methanol JV?
Lori J. Ryerkerk (Retired)
Yeah. Look, Matt, I would just say, you know, we really never comment on what specific assets or processes that we're in. We are actively working multiple opportunities now on various assets. We've always been very clear that if our assets are worth more to someone else than they are to us, you know, we are open to look at divestment. And, you know, and of course, the timing of that is unpredictable. So I can't comment on any, any specifics.
Scott A. Richardson (President and CEO)
Yeah. The only thing I'd add is we have stated that we do like having an integration in methanol, somewhere between about 40%-50% of our total needs. And we think that gives us, you know, kind of a nice balance from being in the market, much like we, you know, articulated we're now doing with nylon. We like being able to buy and make a little bit and be in the market for a portion of that. For methanol, you know, we consistently re-look at what that right balance is. And we've landed right in that kind of 40%-50% range.
Matthew Hettwer (Analyst)
Okay. Thank you. And then, just a quick one. You paid down $500 million, excuse me, $500 million, in debt in the second quarter. You're looking at another $500 million in the third. How do you expect that to trend in the fourth quarter?
Chuck Kyrish (SVP and CFO)
Are you talking interest expense?
Matthew Hettwer (Analyst)
yes.
Chuck Kyrish (SVP and CFO)
Yeah. I would, you know, there's some moving parts in there. There's some short-term revolver draw, and there is the debt paydown. When you look at it, some of those bonds that we're paying down have really low coupons. One of the maturities was swapped down to 1%. At the same time, you've got cash that you're using to pay that down that's actually making really good rates. So I do expect a decline in interest, a slight decline in the second half of the year. I'd say in both Q3 and Q4, the interest expense on a net basis should be $a few million lower than you see in Q2.
Matthew Hettwer (Analyst)
Thank you.
Operator (participant)
Our next question comes from Aleksey Yefremov with KeyBanc Capital Markets. Please state your question.
Aleksey Yefremov (Analyst)
Thanks. Good morning. In your prepared remarks, you talk about expansion between pricing, raw materials, and EM in the third quarter. Do you need to raise prices to achieve that, or is this due to cheaper layers of raw materials inventory?
Chuck Kyrish (SVP and CFO)
Alex, our focus is really on kind of controlling the things that we can control, as Lori mentioned earlier, and launching new projects from our pipeline model. As Lori mentioned, we are assuming very similar landscape in Q3 overall to what we saw in Q2. So we're not necessarily baking that in to our base. It really is about the raw materials flowing through and also, as we launch new projects and new opportunities, getting a mix uplift from that. So I see that being the larger portion of margin expansion.
Aleksey Yefremov (Analyst)
Very helpful. Thank you. And on Clear Lake expansion, can you just clarify how much do you expect it to contribute this year to your EBIT, you know, given all the challenges in total versus your $100 million target? And then how much can we expect next year, assuming the margin picture does not change?
Lori J. Ryerkerk (Retired)
Yeah. Look, Alex, I would expect about half, roughly, this year, and then, you know, the other half next year, and in addition.
Aleksey Yefremov (Analyst)
Thanks a lot, Lori.
Operator (participant)
Thank you. Our next question comes from Frank Mitsch with Fermium Research. Please state your question.
Michael Sison (Analyst)
Hi. Good morning. This is Yazan for Frank. First question around the lowered CapEx, you know, that $400 million-$450 million range. How much of that is maintenance CapEx? And I just wanted to confirm I heard correctly that the early look on 2025 is calling for a similar range?
Chuck Kyrish (SVP and CFO)
Yeah. What we've said in the past is our maintenance right now, most years, is going to run between $300 million and $350 million. And then the balance of capital we would spend each year is going to be for, you know, productivity and growth. So really kind of the earnings growth piece of it. I would just kind of remind you that, you know, as we've said, historically, we have been able to generate a high teens, low 20% return on our entire bucket of capital. So, that tends to be we do focus on returns overall on all of our capital, but maintenance is in that $300-$350 million range.
Michael Sison (Analyst)
Got it. And I know that the synergies for the first half came in around $40 million. Just curious, you know, what gives you guys the confidence that it will more than double in the second half of the year to reach that $150 million level?
Chuck Kyrish (SVP and CFO)
Yeah. It's really the run rate that we're on and the, the actions that we've taken. I mean, most of the synergies this year are on the cost side of the equation. There are some revenue synergies, as I alluded to earlier. But it's mainly cost and the actions that we've taken. We made several announcements around our manufacturing footprint. Those are rolling in. The Uentrop facility has been shut down, and we're kind of ramping up, you know, servicing customers from other locations now. We'll have the next site, which will, will come out of the network, here in the fourth quarter.
And so, you know, with some of those announcements as well as some of the actions we've taken on the functional side of things, such as implementation of our IT systems on an integrated basis, the benefits of that really were always more second half-weighted than first half-weighted.
Michael Sison (Analyst)
Got it. Thank you, guys.
Operator (participant)
Our next question comes from David Begleiter with Deutsche Bank. Please state your question.
David Huang (Analyst)
It's David Huang here for Dave. I guess you noted lower level participation in spot activity in both acetyls and tow. What percentage did you sell to the spot market before the outage? I guess, how should we think about the ramp of those activity in second half?
Scott A. Richardson (President and CEO)
You know, overall, you know, each product line has a different, kind of percentage that's weighted towards spot versus contract. And each region is a little bit different. I would say on the Acetate Tow side of things, things are a little lower percentage that is spot versus contract. Most of that business is contract. In our other product lines, in acetic acid, VAM, emulsions, for example, it's different by region. And so I think just with the constraints that we had, due to some of the supplier outages, you know, we just didn't have the same flexibility that we typically do to be able to flex our value chain in the Western Hemisphere, which limited some of those opportunities.
David Huang (Analyst)
Okay. Got it. And then, medical, can you explain the other time in other timing impacting the quarter? And I think some of your peers are still talking about continued de-stocking medical. I guess, how has, you know, applications outside of implants performed in the quarter?
Scott A. Richardson (President and CEO)
It's been very stable. You know, our medical business has been a key growth area for us. It has been an area focused really around, you know, growing in the areas where we can be successful and picking some of the winning spaces. But we've talked a lot about implants. We've also talked a lot about drug delivery, continuous glucose monitoring, a lot of different mega trends there that have been, you know, useful for our polymers. And we've been working these opportunities for a long period of time. You know, our medical implant business in general certainly is getting better each year. But you are going to have some fluctuations from quarter to quarter. So I'd say that's really not demand-related. It's just kind of more normal order patterns. Our business outside of implants has been extremely stable and growing.
David Huang (Analyst)
Okay. Thank you.
Operator (participant)
Our next question comes from Hassan Ahmed with Alembic Global. Please state your question.
Hassan Ahmed (Analyst)
Morning, Lori. Lori, a couple of quarters ago, you know, in your prepared remarks, you guys talked about sort of maximizing the make versus buy flexibility at Celanese, you know. You know, particularly now in light of, you know, the force majeure on the acetate/VAM side of things, is there a sort of heightened, you know, level of urgency around that? I mean, how are you thinking about that, and what form will that take on a go-forward basis?
Lori J. Ryerkerk (Retired)
I don't think what we've experienced, Hassan, would change our view. I mean, we always want to have the flexibility. You know, if you look at this past quarter, we were unable to make because of our supplier issues in some instances. And so we actually went into the market to buy, to the extent we could, but at a higher cost. I mean, that's not ideal, but, you know, our first priority is to keep our customers whole and to meet our contractual commitments with our customers. So, you know, in reliability situations or turnarounds or whatever, having that ability is good.
And then, you know, the other side of that is, like we've seen in nylon, when the margins for raw polymer got so low, it is really helpful that we had taken the step to shut down Uentrop and put ourselves to where we could be buying raw polymer on the market in what was a very, you know, low, low-priced situation, certainly lower than we would have been able to make it ourselves. So again, I don't think our view is changing at all in terms of wanting to always have that ability to make or buy, depending on the economic situation, and also to help us through periods of operational, you know, shortages.
Hassan Ahmed (Analyst)
Understood. Understood. Extremely helpful. And, you know, just, just as a follow-up, you know, I know you've made a couple of comments about the undifferentiated sort of nylon side of the market. You know, can you, can you sort of dig a little deeper for us, on, you know, what the goings-on are with regards to supply-demand fundamentals over there? I mean, you know, you obviously flagged the whole notion of, you know, Chinese capacity being below the cost curve right now. So, you know, how do you see, you know, this year and over the next couple of years, supply-demand dynamics panning out?
Scott A. Richardson (President and CEO)
Yeah. I mean, look, nylon is no different than the rest of our portfolio in engineered materials. You kind of have three categories of business there. You have a, a standard-grade category. You have a kind of a spec-in category where you have more competition, and then you have the really specialty, new applications, area. And, and it's really important that we play in all three buckets there just because, you know, customers oftentimes are buying all three. And, and we want to make sure we're also filling out our assets. And so it is, while the competitiveness in the standard grades is definitely there, there's still really good opportunities kind of in that, that spec-in and specialty area. I mean, just a simple data point, in the first half of the year, we actually closed over 400 projects in our nylon business, using the pipeline model.
That's a significant step up from the second half of last year. And so it's a good proof point that what we're doing there and really the commercial team's focus on working with customers and building really nice, differentiated business for the long term is going to pay off. We're going to have to, you know, participate in the basic blocking and tackling part of the marketplace. But having that flexibility Lori just talked about is so critical in us kind of building this more contemporary nylon model that can be overall successful and can continue to grow.
Hassan Ahmed (Analyst)
Very helpful. Thank you so much.
Operator (participant)
Our next question comes from Salvador Tiano with Bank of America. Please state your question.
Salvatore Tiano (Analyst)
Yes. Thank you very much. So firstly, I want to understand. I think you said on the $25 million impact that you mentioned, the timing as well as some inventory rebalancing that will weigh on Q3 in Engineered Materials. Does this mean that you were essentially producing above sales in the first half and therefore, you know, what this $25 million is, while this is a headwind to Q3, it was actually a pull forward effectively in H1 for the full year? Is that how we should think about it?
Chuck Kyrish (SVP and CFO)
Yeah. So a large chunk of that is some of the footprint actions that we've taken. And we've been building, you know, inventory now for a number of quarters. So I wouldn't look at it as kind of being a big, you know, benefit in Q2 in particular. It's kind of been a gradual uptick. We also just have some kind of normal; we have certain products that have campaign runs. And so you'll have a little bit of an uptick from time to time and then a downtick. So I wouldn't look at it as being materially different for that piece than what we've typically seen.
Salvatore Tiano (Analyst)
Okay. Perfect. And the other thing I want to understand is that if I heard correctly, I think there was a comment that next year's synergies will be similar to this year's levels, which I believe we're still targeting $150 million. First, is that correct? And second, if I go back to the initial cost synergies targets from your M&M slides, I believe there was like more like a $50, $60, $70 million figure left. So how do you get to a number that's more than double that next year?
Lori J. Ryerkerk (Retired)
Yeah. So let me clarify itself because probably my comments weren't clear before. If you look at 2023, we had $100 million of synergies. And if you look at 2024, $150 million. And so my comment was, look, I, I don't have an exact number yet, for 2025 because we've been very focused on 2024. But I think our synergy should be, based on the actions that we're taking here this year, in the same range as the last two years, so somewhere in that range. And then the remainder of the step up in 2025 is really the improved performance of acetyls with no force majeure, a full year of Clear Lake productivity, and then we should have some further interest rate reductions. So those are the things that I know about for 2025. But as I said, it's still too early to give any number with confidence on 2025.
Michael Sison (Analyst)
Great. Thank you very much.
Operator (participant)
Our next question comes from Laurence Alexander with Jefferies. Please state your question.
Laurence Alexander (Analyst)
Good morning. I just want to confirm, you know, that, that the midpoint of your outlook for the back half of the year is predicated it looks like it's predicated on your automotive volumes being up like mid-single digits, you know, call it 2%-3% above a flat to slightly positive, auto build rate. Is that right?
Lori J. Ryerkerk (Retired)
We are expecting some uptick, some moderate volume increase, I would say, in volumes into automotive.
Laurence Alexander (Analyst)
Thank you.
Operator (participant)
Our next question comes from Patrick Cunningham with Citi. Please state your question.
Patrick Cunningham (Analyst)
Hi. Good morning. Thanks for taking my question. And you, you talked a little bit about the weaker, non-contracted sales for tow. You know, how meaningful is this in terms of typical tow sales? You know, how is the contract side of the business performing? And what are your medium-term supply and demand expectations for the tow business?
Scott A. Richardson (President and CEO)
Yeah. I mean, the tow business has been very stable, Patrick. And, you know, the contracted piece of the business has, you know, performed as expected. Again, as I mentioned earlier, the non-contracted part is a small percentage. It's just we did see a little bit of inventory reduction from our customers in that part of the sector during the second quarter. So it's, we don't expect it necessarily to continue going forward.
Patrick Cunningham (Analyst)
Got it. That's helpful. And then maybe just within nylon, you touched on this a little bit, but can you just talk about the contemporary business model here, how you feel it's performed, you know, how you're maybe thinking about the footprint if we see further pressure from here? And on the flip side, would you put incremental costs back into this business if, you know, demand improves or the make versus buy economics change?
Scott A. Richardson (President and CEO)
Look, we're really proud of the team. I mean, the team has come together and embraced a different way of operating here. And we're taking the ideas really across each function of the organization to really go and build out, you know, a model that we can be proud of that can deliver greater than 25% EBITDA in any economic environment. And that's our target. We're early in it. I mean, we've had some good success. You know, we're seeing margin expansion, as we talked about. We're seeing nice wins coming from our project pipeline. But we have to continue to work the cost side of the equation. We have to continue to focus on, you know, really bringing our organization together to embrace, you know, the pipeline model and continue to elevate the returns that we're getting, you know, overall from the business.
So, you know, depending on what the market gives us, we're going to have to pivot, much like we do, in other parts of our business, both in acetyls and EM. It's building those muscles to be able to adapt as things change from quarter to quarter.
Patrick Cunningham (Analyst)
Very helpful. Thank you.
Operator (participant)
Our next question comes from John Roberts with Mizuho Securities. Please state your question.
John Roberts (Analyst)
Thank you. Just going back to nylon in China here, they have a lot of producers who serve both the plastics and fiber markets. And given the weak carpet and textile markets, are you seeing some of that China nylon shift from fiber to plastics? I know I know some applications can't switch, but I thought there was enough that could switch that maybe that would be pressuring the market.
Scott A. Richardson (President and CEO)
John, that's really not where we're seeing the pressure from. I mean, there's a lot of consistent players in the plastics market. I wouldn't say that's been a material issue.
John Roberts (Analyst)
Got it. Thank you.
Scott A. Richardson (President and CEO)
Diego, we'll make the next question or last one, please.
Operator (participant)
Thank you. And our final question for today comes from John McNulty with BMO Capital Markets. Please state your question.
John McNulty (Analyst)
Yeah. Good morning. Thanks for taking my question. So Lori, I think you said of the original $150 million that you expected to get from lower raw materials kind of working through, you're going to get about half that. Does the other half get pushed out into 2025, or is it really just an opportunity that, given the circumstances, you're just not going to be able to capture? I guess, how should we be thinking about that?
Lori J. Ryerkerk (Retired)
I would think about it as we weren't able to capture it this year. There's no guarantee it will be there next year. If you think about it, the cost of inventory we're building right now is will be what we see in the first half of next year, at least in the Engineered Materials. So I can't count on that for next year. I mean, we just have to see how cost of inventory goes for the rest of this year.
John McNulty (Analyst)
Okay. Fair enough. And then I guess with regard to the acetic acid capacity that came on in China, you know, the two new world-scale plants, I think, like, one of the issues was that you didn't see a whole lot of the downstream assets come on yet. And I think that was putting pressure on acetic acid prices. Can you give us an update as to whether or not those downstream assets have come on yet? And if they haven't, does that mute the ability, you know, for growth or improvement in the market even as, you know, China construction starts to come back on and some of the downstream demand starts to come back on? I guess, how should we be thinking about that?
Lori J. Ryerkerk (Retired)
So John, some of the uses that those plants were expected to serve were things like caprolactam, which is new, PVOH, EVA. I'm not sure about the caprolactam plant, if I'm honest. But PVOH, I think, is up and okay. EVA is up from what we know. But honestly, EVA demand right now or not EVA demand, but utilization of the EVA plants has gone to 70% or below from what we know. So I, you know, again, just because of the softness right now in solar panels, and so I think, you know, while it may be up, we're not seeing those plants consuming the volume of VAM that we would normally expect.
Scott A. Richardson (President and CEO)
Yeah. And John, really the root cause of that is the end-use demand, particularly paint, coatings, construction, and some of the solar spaces Lori mentioned are just weak. And so yes, while we've seen capacity come on in acetic acid and pricing kind of move up and down, our margins have been largely stable now for quite a while. We've seen compression in VAM margins because that construction sector, as well as solar, has been so weak. So I think that's more of kind of where that compression has been seen.
John McNulty (Analyst)
Got it. Thanks very much for the call.
Operator (participant)
Thank you. I'll now hand the floor back to Bill Cunningham for closing remarks.
Bill Cunningham (Head of Investor Relations)
Thank you. We'd like to thank everyone for listening in today. As always, we're available after the call for any follow-up questions. Diego, please go ahead and close out the call.
Operator (participant)
This concludes today's conference. All parties may now disconnect. Have a good day.