Paccar - Earnings Call - Q1 2025
April 29, 2025
Executive Summary
- Q1 2025 revenue was $7.44B and GAAP diluted EPS was $0.96; adjusted diluted EPS was $1.46 due to a $264.5M after-tax EC-related litigation charge. Revenue beat consensus, but adjusted EPS missed, and management guided Q2 gross margins lower on tariffs and pricing timing.
- Record PACCAR Parts revenue ($1.69B) and strong pretax profit ($426.5M) offset softer truck margins; Truck, Parts & Other gross margins were 14.8% in Q1 with Q2 guidance of 13–14% given full-quarter tariff impacts.
- Management cited uncertain economic conditions, tariff policy investigations (Section 232), and timing of backlog repricing as near-term headwinds; expects second-half market improvement and continued parts growth (2–4%).
- Catalysts: litigation resolution progress, tariff policy clarity, used-truck market improvement, and steady vocational/LTL demand; dividend maintained at $0.33 per share.
What Went Well and What Went Wrong
What Went Well
- Record PACCAR Parts revenue ($1.69B) and solid pretax profit ($426.5M); parts gross margin ~30.7% and expected 2–4% sales growth in Q2 and FY25. “PACCAR Parts…deliver greater uptime and profitability…world-class logistics capabilities”.
- Financial Services strength: PFS pretax income $121.1M (+6% YoY), portfolio quality remained strong; used truck center expansion in Warsaw planned to bolster European sales.
- Liquidity and equity: Operating cash flow $910.3M; stockholders’ equity $18.02B; continued capex ($171.9M) and R&D ($115.4M) investment in next-gen powertrains and connected services.
What Went Wrong
- Adjusted EPS missed S&P Global consensus due to tariff impacts and pricing lag; management reduced near-term gross margin expectations (13–14% in Q2) as full-quarter tariffs hit costs before repricing can flow through.
- Truck deliveries declined YoY (40,100 vs 48,100) and QoQ (43,900), with Mexico demand pausing amid trade discussions; NA/EU deliveries trend flat sequentially.
- EC civil litigation required an additional $350M pretax ($264.5M after-tax) charge in Q1, depressing GAAP earnings; management is progressing toward resolution but costs were higher than prior estimates.
Transcript
Operator (participant)
Morning and welcome to PACCAR's first quarter 2025 earnings conference call. All lines will be in listen-only mode until the question-and-answer session. Today's call is being recorded, and if anyone has an objection, you should disconnect at this time. I would now like to introduce Mr. Ken Hastings, PACCAR's Director of Investor Relations. Mr. Hastings, please go ahead.
Ken Hastings (Director of Investor Relations)
Good morning. We would like to welcome those listening by phone and those on the webcast. My name is Ken Hastings, PACCAR's Director of Investor Relations. Joining me this morning are Preston Feight, Chief Executive Officer; Harrie Schippers, President and Chief Financial Officer; Kevin Baney, Executive Vice President; and Brice Poplawski, Vice President and Controller. As with prior conference calls, we ask that any members of the media on the line participate in a listen-only mode. Certain information presented today will be forward-looking and involve risks and uncertainties that may affect expected results. For additional information, please see our SEC filings at the Investor Relations page of paccar.com. I would now like to introduce Preston Feight.
Preston Feight (CEO)
Thanks, Ken. Good morning, everyone. First, I'd like to congratulate Harrie Schippers on his upcoming retirement after a wonderful 39-year career at PACCAR. We'll all miss him, and we wish him all the best on the next chapter in his life. Congratulations to Kevin Baney, our Executive Vice President, who's been responsible for DAF Trucks and will now become responsible for PACCAR Financial Services. Kevin will also work with Ken on Investor Relations. Congratulations to Brice, who has been promoted to PACCAR Senior Vice President and CFO, reporting directly to me. I'd like to thank PACCAR's outstanding employees who did an excellent job providing our customers with the highest quality trucks and transportation solutions in the industry. PACCAR achieved good revenues and net income in the first quarter, including record revenues at PACCAR Parts, good performance by the truck divisions, and strong financial services results.
PACCAR achieved revenues of $7.4 billion and adjusted net income of $770 million. PACCAR Parts achieved record quarterly revenues of $1.7 billion and quarterly pre-tax income of $427 million. We're pleased with the continued growth at PACCAR Parts after a record-setting 2024. PACCAR Financial had a very good quarter, achieving pre-tax income of $121 million, just 6% higher than the $114 million in the first quarter of last year. We estimate this year's U.S. and Canadian Class 8 market to be in a range of 235,000-265,000 trucks. The North American truck market is being affected by uncertain economic conditions and the overall impact of new tariffs. In Europe, DAF's premium aerodynamic trucks provide customers with the latest technology and the best operating efficiency. We project the 2025 European above-16-ton market to be in a range of 270,000-300,000 trucks.
This year's South American above-16-ton truck market, where DAF trucks are highly desired by our customers, is expected to be in a range of 100,000-110,000 vehicles. PACCAR delivered 40,100 trucks during the first quarter and anticipates delivering 37,000-39,000 trucks in the second quarter. PACCAR's truck, parts, and other gross margins were 14.8% in the first quarter, as economic uncertainties and tariffs began affecting input costs and truck pricing. With a full quarter of current tariff-related impacts, we anticipate second quarter margins could be in a range of 13%-14%. Margins could improve considerably depending on how the announced truck tariff policy investigation progresses. In the second half of the year, we anticipate increased customer demand as policy and emissions regulations become more stable. PACCAR's industry-leading trucks, expanding parts business, best-in-class financial services, and advanced technology strategy position the company well for an excellent future.
Harrie Schippers will now provide an update on PACCAR Parts, PACCAR Financial Services, and other business highlights. Harrie, over to you one last time.
Harrie Schippers (President and CFO)
Thanks, Preston. PACCAR's first quarter adjusted net income of $770 million excludes a $265 million after-tax provision related to EU civil litigation settlements. PACCAR is making good progress on resolving the civil litigation. The company has settled with the majority of claimants and continues to pursue appropriate resolutions. PACCAR Parts achieved record revenues in the first quarter with excellent gross margins of 30.7%. We estimate parts sales to grow by 2%-4% in the second quarter and for the full year. PACCAR Parts is beginning to benefit from the live data of the 600,000 connected Kenworth, Peterbilt, and DAF trucks in operation. This connectivity enhances our customers' operational efficiency and vehicle uptime. PACCAR Parts has 20 parts distribution centers worldwide and continues to expand its global distribution network. PACCAR Financial Services' pre-tax income was a robust $121 million, compared to $114 million a year earlier.
This reflects solid portfolio growth and continued strong credit quality. PACCAR Financial operates 13 used truck centers around the world to support the sale of premium Kenworth, Peterbilt, and DAF used trucks and is building a new used truck center in Warsaw, Poland, this year. Used truck demand and pricing improved in the first quarter, and we expect it to further improve throughout the year. Similar to PACCAR Parts, PACCAR Financial provides steady profitability during all phases of the business cycle. In 2025, we're planning capital investments in the range of $700 million-$800 million, and R&D expenses in the range of $450 million-$480 million, as we continue to invest in key technology and innovation projects. These include next-generation powertrains, advanced driver-assistance systems, and integrated connected vehicle services. PACCAR is also investing in manufacturing capacity to support future long-term growth and our customers' success.
This includes an expansion of the DAF factory in Brazil, construction of a new PACCAR engine remanufacturing facility in Columbus, Mississippi, and an expansion of the PACCAR Technical Center in Washington State. As Preston noted, this is my last earnings conference call. PACCAR is an exceptional company, and I want to thank all my colleagues, past and present, for making it such a wonderful place to have a career. We're pleased to answer your questions.
Operator (participant)
Ladies and gentlemen, if you'd like to register a question, please press Star followed by one on your telephone keypads now. As a reminder, that's Star followed by one on your telephone keypads now. If you'd like to withdraw your question, please press Star followed by two. When preparing to ask your question, please ensure you're unmuted locally. Our first question comes from Chad Dillard of Bernstein. Chad, your line is open. Please go ahead.
Chad Dillard (Analyst)
Hi, good morning, guys.
Ken Hastings (Director of Investor Relations)
Hey, Chad.
Chad Dillard (Analyst)
I wanted to dig a little bit more into your guidance for gross margins. I was hoping you could tease out just how much are you embedding in terms of incremental tariff costs and how much you expect to pass through to customers, and then just talk through how you're thinking about gross margins to the balance of the year, please.
Ken Hastings (Director of Investor Relations)
Yeah, Chad. As we shared in our comments, it's a little bit uncertain out there right now in terms of what the tariff policies will look like. You may or may not be following how they apply to trucks specifically, but last week, the government announced a Section 232 investigation into tariffs for medium and heavy-duty trucks to evaluate what their policies would be. There's an open comment period through the middle of May, and they haven't declared when they would make any kind of revision to those policies, but they're under review, which could have meaningful impact to what the impact is on a per-truck basis. Obviously, that's an input cost to us right now, so it could have a shaping form factor for us in Q2 and beyond.
is kind of hard to actually know what the exact numbers are going to be because of that uncertainty. We think that right now, we are an American company that builds our trucks in the markets for the markets. Our teams in Denton and Chillicothe are doing a great job building trucks for us for the U.S. markets, but there are components that come into those factories from our suppliers from other countries, and we do not know how they would be affected.
Chad Dillard (Analyst)
Got it. That's helpful. Just over to the vocation side of your business, I know that you guys tend to over-index to that part of the market. I would just be curious on how you're thinking about contribution from there as you go through the balance of the year.
Ken Hastings (Director of Investor Relations)
Yeah, it's still a solid part of our business right now. I mean, the vocational market is reasonable, and it feels like that'll continue to be a strength throughout the year. We'll see how that plays. The LTL market still also feels stable, and I think everybody kind of is aware that the truckload carriers are still under some pressure, and that pressure is something that we feel in the market estimations for the year.
Chad Dillard (Analyst)
Good. Thanks for passing on.
Ken Hastings (Director of Investor Relations)
Cool. Have a good day.
Operator (participant)
Thank you. Our next question comes from Jamie Cook of Truist. Jamie, your line is open. Please proceed with your question.
Jamie Cook (Analyst)
Hi, good morning. I guess if you could just unpack a little further the margin disappointment relative to, I mean, your deliveries were essentially in line with expectations. The margins were lighter relative to your guide. I know you talked about input costs and truck pricing. If you could unpack that more and let us know what price cost was for both truck and parts. I guess that's my first question. My question, just your comfort level with inventory levels. Some of the industry experts, the inventory levels were really elevated, and I'm wondering if that's a concern in yours, how that impacts orders and if you could comment on your orders specifically. Last, congratulations to Harrie. Thank you for all your help throughout the years, and congrats, Brice. Look forward to working with you. Thanks.
Ken Hastings (Director of Investor Relations)
Thank you. Jamie, it's nice you did recognize Harrie. We're all going to miss him greatly. He's a good guy. To pick up on your first question, I mean, I think if we try to, I think your words, unpack it a little bit further. If I think about the margin, I think of sequentially costs being up 1% and price being relatively flat, and that's really a factor of the tariff impacts that we saw, but they weren't a full quarter of impact of those tariffs. That's the easiest way to think about the delta of what we shared previously and what we experienced today. Now what we see coming into a look for Q2 is we took the conservative view we shared with you as to say that if there's a full quarter of tariff impacts, it could look like this.
Now, life isn't quite that straightforward because we'll also be pricing those tariffs into our customers' trucks as we go along, but we do have the backlog that we have to manage, and we can't just pass that along as we have relationships with people, so there's a partial pass along, and we're working with our suppliers on that as well. It is kind of a few inputs and a few outputs out of this, and we see that over time, we'll be adjusting our pricing to match the tariffs, but it takes some time to do that, or as we mentioned, the tariffs might change, and that would reduce the need to make those adjustments.
Jamie Cook (Analyst)
Did you guys put through the 4%-7% that's out there in the—sorry, go ahead. Go ahead.
Ken Hastings (Director of Investor Relations)
No, go ahead, Jamie.
Jamie Cook (Analyst)
No, I was just going to say a follow-up. There's been talk that the industry has put through an incremental, I think, 4%-7% price increase at the end of the first quarter, wondering if you were in, if you also were putting price increases through at that level. Sorry, you can answer after that the question on the elevated inventories.
Ken Hastings (Director of Investor Relations)
Yep, inventory. Yeah, for sure. Yeah, your numbers are about the right numbers to think about in terms of what's been passed along. You just have to get into the sequencing of when you announce a price increase, when you're going to build it, what your backlog was that already was behind that, so you don't affect all of that, and that's the puts and takes of that. If I switch over to your question on inventory levels, we look at the inventory for Class 8 for the industries around four months, and we're at 3.1 months. I think back to the earlier conversation we had with Chad, we have a lot of vocational trucks, so we're probably actually lighter on a like-for-like comparison because vocational trucks take a longer time to get a body put on them and put back into service or put into service.
We feel pretty comfortable with our three months of retail inventory.
Jamie Cook (Analyst)
Thank you. That was very helpful.
Ken Hastings (Director of Investor Relations)
Great. Have a good day.
Operator (participant)
Thank you. Our next question comes from Michael Feniger of Bank of America. Michael, your line is open. Please proceed.
Michael Feniger (Analyst)
Thank you. Thanks, guys, for taking my question. Just on the EPA emissions change, if there is a change in 2027, how does that inform your view in terms of how you guys are looking at your costs as the truck markets soften? Is this a time when you guys normally might pull back more costs to protect margins, or is there an eye on 2026 where if there is a view that the EPA 2027 is still intact, that we have to build towards that? I am just kind of curious how that also is shaping your guys' kind of view as you kind of go through 2025.
Ken Hastings (Director of Investor Relations)
Yeah, great conversation for us to have together. I think as we think about the regulatory standards, there's a lot that gets mixed into that conversation, and it's really not one conversation. It's really a couple of parts to that. One is greenhouse gas or CO2 reductions, which have a standard which is intended to come into effect in 2027. That's where you see an ACT impact, clean truck impact. The EPA has stated that they intend to look at those standards and potentially not implement GHG Phase 3 in 2027. That would mean the number of electric vehicles, the kind of CO2 reductions that come with that could be adjusted. That's not what they've done yet, but that's what they've made a stated intent to address. Those changes really don't have a significant input cost change for us in terms of vehicle costs.
The trucks that are GHG compliant do not look like the diesel trucks that are GHG compliant do not have a real different cost structure in 2027. If those changes are made, there might just be less requirements for EVs made. That is part one of this regulatory discussion. Part two of the regulatory discussion is around NOx. The NOx standards, which are in place, call for a reduction from today's 200-milligram engines down to a 35-milligram engine. That is the law that is in place today. If that law enacts, then costs of the vehicles will go up significantly because there will be additional hardware required to meet those NOx levels. The government has said they intend to look at that and consider whether that will stay at 200 milligrams or, excuse me, move to 335 milligrams or stay at today's 200 milligrams.
That is less clear that there would be really an adjustment there. The good thing for PACCAR is we've made great investments in clean diesel technology along the way, never adjusted from that, as we've shared with you over the years. We are prepared for any of these situations that come up. We've got great engines for today that meet the NOx standard at today's cost structure. We've got new engines designed and running that can meet the 35-milligram NOx standard, and they come with some on-costs. Whichever way the standards go, we will be in a very good position to meet those for our customers. Of course, what the government does will inform the market's reaction. What we look at is, say, today's numbers are 35 milligrams. That would drive up the cost of a product in 2027, and we are prepared for that.
If it changes, we'll be in good shape too.
Michael Feniger (Analyst)
Understood. If I could just—my follow-up, just if you could kind of dive into the parts side, it seems like the growth was a little slower than we expected. Margins, just are we starting to kind of normalize here? What did you kind of see when we think of the parts margins on a year-over-year sequential basis, how we kind of think about that profitability? Anything we should kind of think about that as we're thinking for the full year and into Q2, but for 2025? Thank you.
Harrie Schippers (President and CFO)
We were very proud of the Parts team that they've been able to grow parts sales in the first quarter in a soft market for parts and service. The margin levels of above 30%, that's a pretty good margin for PACCAR Parts. We think the team does an amazing job getting solid, good margins out of a soft market these days. We expect parts to continue that growth throughout the year at levels between 2% and 4%.
Ken Hastings (Director of Investor Relations)
You know what? I would add everything Harrie said makes perfect sense. He shared in his opening comments the number of connected vehicles we have now and the number of connected vehicles and the technology that our Parts team is bringing gives us great confidence that parts will continue to grow over the short, medium, and long term at good levels.
Operator (participant)
Thank you. Our next question comes from Tami Zakaria of JP Morgan. Tammy, your line is open. Please go ahead.
Tami Zakaria (Analyst)
Hey, good morning to all, and congrats to Kevin on the new role. Harrie, what an exemplary career at PACCAR. I will definitely miss you, but best of luck. I'm sure great things await you. I wanted to ask a question on tariffs again. I just wanted to clarify, and I appreciate the situation is very fluid, but it seems like there are not any potential Section 232 tariffs embedded in the second quarter gross margin guide. Is that correct? If so, what is essentially embedded in that 13%-14%? Does it include the now-paused tariffs, which could become effective at any point next month? What is really in that 13%-14% guide?
Ken Hastings (Director of Investor Relations)
13%-14% includes tariffs as they are today. That is the impact of what is going on there. That is as it is. As the rules are today, that is what we have given you. The Section 232 adjustments could include impact on foreign-made trucks. It could include impact on components. It could also include exemptions on components for U.S.-made trucks. None of that is clear. We have to wait and see what that looks like.
Harrie Schippers (President and CFO)
I think it's okay to summarize that the impact overall, the overall impact would be less unfavorable or even favorable. Is that?
Ken Hastings (Director of Investor Relations)
I think that's a fair way to say it. That's kind of what we tried to give you, that conservative look at the quarter with the standards of today because we know what we know. If the rules change, then we think that if anything, it should be upside for us.
Tami Zakaria (Analyst)
Understood. That's very helpful. In the same thread, I wanted to understand the impact, potential impact of tariffs on the parts business. I know that you don't manufacture parts yourselves, but any color on what mix of parts come into the U.S. from the outside and how much is locally sourced and whether you have to take pricing to offset some of these tariff headwinds on the cost of procurement?
Harrie Schippers (President and CFO)
Yeah. Tell me, President, we'll continue, but for parts, we don't have a backlog. If we get cost increases for parts, it's much easier to pass those on with almost immediate effect. It has less of a margin impact there. There are parts that are sourced and are impacted by tariffs, but we're working with the suppliers. If and when those costs for us would go up, we would increase prices accordingly.
Ken Hastings (Director of Investor Relations)
Yeah. Just to give you ballparks, I'd say less than half of our purchases are really from maybe country of origin outside the U.S. Parts, it's a little bit higher percentage than the nominal, but it's not the majority because, as you said, we actually do make some of our parts, right? The proprietary parts are, in many cases, things we do make for ourselves and do get made in America.
Tami Zakaria (Analyst)
Understood. That's very helpful. Thank you.
Ken Hastings (Director of Investor Relations)
You bet.
Operator (participant)
Thank you. Our next question comes from Rob Wertheimer of Melius Research. Rob, your line is open. Please go ahead.
Rob Wertheimer (Analyst)
Thank you. My first question is on the Section 232 tariff truck policy investigation. Is the potential positive there a relative one because you make more trucks in the U.S., I suppose, than some of your competitors, or is it more of an industry comment you were making where they could kind of offset some of the hit to purchase parts from overseas?
Ken Hastings (Director of Investor Relations)
I think it could be both, Rob. I think yours is an astute observation, but I think it could be both. It could be a relative, and it could be an absolute.
Rob Wertheimer (Analyst)
Okay. Perfect. Thank you. The second one's going to be a little bit general, but you mentioned you have the truck backlog. You're not repricing those instantly for tariffs. I'm a little bit curious, how are you managing through this fairly dynamic environment? I mean, when you know the tariff, are you pricing that immediately into current orders, or do you not because the tariff could change by the time the truck gets made and delivered? A little bit, if you're willing, the same question on, do you anticipate any margin impacts from production variances from supply chain from when you order and when you choose to order depending on tariff? I mean, is that a potential margin risk towards the end of the year or not? If I don't get back on the line, I'd just like to say, "Harrie, congratulations.
It's been a pleasure talking with you over the years, and thank you for everything.
Ken Hastings (Director of Investor Relations)
Thanks, Rob. Yeah. I think that all the things you said in terms of the pricing structures and the timing for them are all true, but there's not a single 30-second answer I could give you about how they affect things. There are times when we have a backlog we're protecting. There are times when component prices are coming in. There are times when we know what they're going to be. There are times when it's a little bit uncertain. We're still defining HTS codes, which is what the government defines the tariff structures around. We are deciding whether those specific components or subassemblies are USMCA compliant. That's having some impact. I really can't give you a better answer than it's pretty dynamic right now. The beautiful thing about being part of this company is having great people who are thinking about it every day.
We work closely with our suppliers on this. I think collaboratively with our suppliers, our dealers, our customers, and this great team, we feel like we've got our fingers really on the pulse of it and are right on top of it.
Rob Wertheimer (Analyst)
Understood. Thank you.
Ken Hastings (Director of Investor Relations)
You bet.
Operator (participant)
Thank you. Our next question comes from Steve Volkmann of Jefferies. Steve, your line is open. Please go ahead.
Steve Volkmann (Analyst)
Thank you very much. My congratulations as well, Harrie. You're going to miss this, believe it or not. My question is, I can see you shaking your head there. Anyway.
Harrie Schippers (President and CFO)
No, I'm curious. I said I know I will, Rob. I know I will miss this too. I'm going to.
Steve Volkmann (Analyst)
I'm curious. I know there's a lot of moving pieces on the tariffs here. Assuming nothing changes on 232, that doesn't happen. And what's in place today stands. Is it reasonable to assume the gross margins will be the lowest of the year in the second quarter and then sort of improve as the year progresses as pricing comes in?
Ken Hastings (Director of Investor Relations)
Like you know, we're in a really uncertain economic time and tariff time. Guiding the second quarter is something more than even a lot of people are doing. Asking me to go out into Q3 and Q4 and forecast that, I'm very reluctant to do that. We do feel like we have a great strategy in place and that the more time passes, the more likely we are to get that in place. We do feel like the market will strengthen as we get into the second half of the year. If you want to suppose that into improving margins, I think that's a fair supposition.
Harrie Schippers (President and CFO)
Building our trucks in the U.S. for the U.S. at the end of the day, that should be a good thing for us.
Steve Volkmann (Analyst)
Okay. I do not know if, Preston, this is what you were thinking, but I am curious how you are thinking about the potential for pre-buys. Now it feels like there could be two flavors here. One, ahead of any emission changes. I think we have talked about that on previous calls. I am curious if there is an updated thought there. We might also see some pre-buys if this 232 thing comes in and people want to buy the pre-tariff trucks off the lot maybe. I do not know. Just any thoughts in that direction would be great.
Ken Hastings (Director of Investor Relations)
I don't really see that commentary on the Section 232 of the buying the trucks off the lot because we're really building trucks for customers. They have a customer name on them. The consideration of Section 232 is whether there would be tariffs applied to trucks built outside of the U.S. and then how they would treat components that are coming into trucks that are built in the U.S. I don't really think there's kind of a pre-buy scenario around tariffs that I would envision. I would say that regarding the regulatory standards, as we shared, if there is a current NOx standard implemented, if there's a NOx standard change implemented in 2027, a move from 200-milligram engines to 35-milligram engines, that will affect hardware on trucks, which will drive up costs on trucks. That could drive customer buying patterns into 2026.
The thing is, nobody knows that right now because the rule is in place. The law is in place around the 35-milligram NOx standard. There is a statement made that they're considering opening it back up. We recognize that on costs for our customers makes their lives difficult. We are well-positioned to offer our customers a 200-milligram engine if that's what's legally allowed. We also recognize that if the government says it's got to be 35-milligram engines, we have great engines to offer them there too.
Steve Volkmann (Analyst)
Thank you.
Ken Hastings (Director of Investor Relations)
You bet.
Operator (participant)
Thank you. Our next question comes from Stephen Fisher of UBS. Stephen, your line is open. Please go ahead.
Stephen Fisher (Analyst)
Thanks very much. Of course, add my thank you to Harrie and congratulations. It's been a real pleasure. Just from a backlog perspective and ordering, what kind of visibility do you guys have to Q2 to Q4 at this point? We've heard some anecdotes about it's really challenging for buyers to kind of step up and place orders at the moment. I'm curious what kind of visibility and what's the fill-out look like at this point, and how does that vary between North America and Europe?
Ken Hastings (Director of Investor Relations)
Yeah, sure. I think we're in kind of a normal pattern for ourselves of where we are in the market cycle. We have substantially full in the second quarter, taking orders through the third and fourth quarter right now. I'd say that this can be actually comparable between the U.S. and Europe in terms of backlog, kind of that substantially full in the second quarter and starting to think through the third quarter right now. I agree with your comments that the customers are trying to discern what their buying pattern should be and what the tariff policies will be. They are kind of contemplative of that, and it's affecting some people's buying patterns. Listen, the trucks we're building today are the most efficient trucks we've ever built, and they're good for operating costs, and the customers love them.
There is that pull towards those trucks as well.
Stephen Fisher (Analyst)
That makes sense. Just on the parts growth, I'm just curious, what do you think is going to drive the acceleration in Q2 and for the rest of the year? What kind of sort of freight conditions you're assuming for that? I know you've mentioned a couple of times about general improvements for the second half of the year. Just curious, I guess, beyond parts, what are you assuming is going to change to drive that improvement? Thank you.
Ken Hastings (Director of Investor Relations)
You bet. I just think the general comment, the last one first, it feels to me like our customers, truckload customers, have been in a kind of a long period of low rates, yet there's still a lot of ton-miles being driven. Trucks are being used. Kind of back to what I just stated before is the trucks we're building today are the most efficient, highest-performing trucks we've ever built. There is a desire for those trucks, especially as their older trucks continue to accumulate miles. I'd also add that we're seeing the used truck market start to show some good signs of pricing in the U.S. That's an upside for people to think about turning their fleets also.
If there's a good residual value on their truck, and there always is for the PACCAR premium trucks, then that's helpful to them to think about how they want to do their second-half buys.
Stephen Fisher (Analyst)
Thank you.
Ken Hastings (Director of Investor Relations)
You bet.
Operator (participant)
Our next question comes from David Raso of Evercore. David, your line is open. Please go ahead.
David Raso (Analyst)
Hi. Thank you for the time. Obviously, thank you, Harrie, for all the meetings and time in Europe together. Obviously, congrats to you and you and Kevin. First question, production versus retail, 2Q. How are you thinking about your deliveries, your production versus retail? How do you think about production versus retail for the rest of the year? I have a quick follow-up about the sequential pattern of cost versus price.
Ken Hastings (Director of Investor Relations)
For production versus retail, I think they're pretty much in good position with each other. We already talked about inventory levels for us being in a reasonable position. I think production versus retail, there's not a lot of step change between the two of them. Your sequential question is what specifically, David?
David Raso (Analyst)
That's a full-year comment on production versus retail, just to clarify the first part. That's a comment basically for the rest of the year, not just 2Q. You're pretty comfortable with production.
Ken Hastings (Director of Investor Relations)
I would say it more specifically to 2Q. I'd say it more specifically to 2Q, but I think it does generally apply to the full year.
David Raso (Analyst)
Okay. The follow-up. The math you're implying sequentially is, say, revenues down $250 million-$270 million sequentially, but gross profits down $190 million, right? A pretty challenging decremental sequentially. When I think about that, is the second quarter getting full tariff impact from what we know now, not speculating about future tariffs? Is it a full quarter of tariff hit, but not a full benefit from the pricing actions you're expected to take? Would the idea be by third quarter, that negative sequential gross margin, all else equal, should get better? Or is it, no, we're getting what we can on price in 2Q, and that quarter hit on tariffs, it doesn't really necessarily get any better in 3Q? Just trying to get a sense of that negative sequential. How painful is that?
Is that just sort of the way to think about it the rest of the year?
Ken Hastings (Director of Investor Relations)
Yeah, David, I can always count on you to come up with some good analysis for us. Once again, didn't disappoint. I would say that your assessment is about correct, as the sequential change is really because of the full quarter impact of the tariffs without the ability to fully pass that into price. As we see stability in tariff policy going forward, you would expect to see the pass-on of price and cost to be more aligned.
David Raso (Analyst)
Okay. Thank you very much. I appreciate it.
Ken Hastings (Director of Investor Relations)
Yeah. Great question. Thanks.
Operator (participant)
Thank you. Our next question comes from Angel Castillo of Morgan Stanley. Your line is open. Please proceed with your questions.
Angel Castillo (Analyst)
Hi. Thanks for taking my question. Harrie, I just want to echo everybody else. Congratulations and wish you all the best. Maybe just to continue to unpack that a little bit more, the 2Q, could you just maybe parse out how much of that is maybe volume-related, the contraction in gross profit margins sequentially, how much of that is volume versus the tariff flow through you're talking about? If you could talk about also the deliveries you're guiding to for 2Q by region, that would be helpful.
Ken Hastings (Director of Investor Relations)
I would say that, of course, if there's a few less trucks in the quarter, that could have some impact. I would say it's mostly more to do with the discussion around tariffs is driving it. That feels more likely to be the talking point. In a by-region standpoint, I think the North America or U.S., Canada feels relatively flat in deliveries, similar to Europe. What we've seen is the Mexico market is really kind of given a pause right now. That pause is probably because their economy can be impacted by the trade discussions that are ongoing. Customers are hesitant there. That's really the biggest number change between deliveries in Q1 and Q2.
Angel Castillo (Analyst)
Got it. That's very helpful. Could you maybe, on the tariff side, there's been a lot of discussion around the pricing ability, but maybe could you touch on just the levers or the ability to maybe mitigate some of these potential headwinds kind of near-term as you think about either cost management or other kind of initiatives you can implement? Just more broadly, strategy-wise, how should we think about just all of this uncertainty impacting your desire to either invest or the location or maybe the areas that you choose to invest in going forward, right? The R&D reduction. Just a broader discussion there would be helpful.
Ken Hastings (Director of Investor Relations)
I would frame the investment appetite we have as to continue making great investments on the products that we have for the future with no real deviation in that approach. We love what our business plans and product plans look like for the next five years. We will continue making those investments because they have great returns for our customers and our company and our shareholders. No change there at all. High confidence in those product developments. That is what I would share on that one. Can you remind me again your first question?
Angel Castillo (Analyst)
Yeah. Just on the tariffs, just anything that you can do in terms of levers that you can pull for cost management or other ways to kind of mitigate some of the margin pressure.
Ken Hastings (Director of Investor Relations)
Yeah. I mean, we work closely with our suppliers. Obviously, it's one of the key elements we can do here. Where are components coming from? And are they USMCA qualified? Does that mean they have a code applied to them? Skip the acronym. Do they have a code applied to them in an understanding that they are USMCA compliant? If they do, then that reduces the tariff impact. That's really dynamic because you're talking about not just first-tier, but second and third-tier suppliers. I think we have a great team of people working on these cost management programs in partnership with our wonderful suppliers. Together, they're controlling costs in the best way possible. We think there is some potential to mitigate some of those costs, no matter what the scenario.
Angel Castillo (Analyst)
Very helpful. Thank you.
Ken Hastings (Director of Investor Relations)
Great.
Operator (participant)
Our next question comes from Kyle Menges of Citi. Kyle, your line is open. Please go ahead.
Kyle Menges (Analyst)
Thank you. I'll echo everyone else. Congrats on the retirement, Harrie, and best wishes. I was hoping if you guys could, again, just elaborate on the gross margin in the quarter and just what's embedded in the guide for 2Q. I think just more specifically, I'm trying to get a handle on the cost inflation you're seeing and what could actually be, I guess, stickier, notwithstanding tariff impacts, just kind of thinking about what could maybe be a little bit stickier on the cost inflation side, just in kind of the big buckets of raw materials, components, labor, and I guess anything else to call out.
Ken Hastings (Director of Investor Relations)
Yeah. I feel like we've done a pretty good job of explaining everything we can around gross margins for Q1 to Q2. I think that most of the impacts are really related to the cost impact, and most of the Q2 cost impact is assigned to tariffs. I think we've kind of shared quite a bit on that. I'm not sure what else I could add on that. I don't know if anybody else would.
Harrie Schippers (President and CFO)
On the other cost elements, we've seen costs being flat, good productivity flows through our cost reduction efforts. We have cost reduction CMP programs going on with a lot of our suppliers, and productivity in the factories is going well too. Offline inventory is at low levels. Production is pretty smooth in most factories. From that perspective, things are moving well along.
Kyle Menges (Analyst)
Okay. Got it. I just wanted to dig into the parts growth a little bit more for the second quarter, expecting I think up 2-4%. Just a little surprised by that, I guess, with deliveries implied down 20, and then freight activity could be fairly muted. Just help me understand what gives you confidence in parts growth of that 2-4%. I guess is it a lot of it pricing?
Harrie Schippers (President and CFO)
Some of it isn't pricing. If you look at the first quarter, sequentially, pricing was up like 2.5%. Cost was up similar. The price increase of between 2% and 3%, of course, that helps with revenue growth as well.
Kyle Menges (Analyst)
Okay. Thank you.
Operator (participant)
Thank you. Our next question comes from Tim Thien of Raymond James. Tim, your line is open. Please proceed.
Tim Thien (Analyst)
Great. Thank you. Good morning. Maybe just to start, just an update from the standpoint of your footprint in North America. Just thinking, again, obviously hard to know where the tariff winds are going to blow. As we sit here today, I'm just curious if the company is thinking of any changes to the footprint with respect to the Canadian and Mexican output. I guess, related to that, there have been some capacity increases that have been put forth. I'm just curious if you're rethinking those or how you're approaching those with the potential that maybe the market sizes aren't as large as what we would have thought a year or so ago. Kind of a two-part question just on the North American capacity and footprint.
Ken Hastings (Director of Investor Relations)
Thanks, Tim. Thanks for the question. Footprint in North America is really well positioned. I think we have a great Peterbilt factory, a principal Peterbilt factory in Denton, Texas. Fantastic people, fantastic investments we've made there, brought up the efficiencies. Chillicothe, Ohio also does a great job for us for our Kenworth factory for Class 8. We have a plant in Renton, Washington, which has capacity for us. Those are the principal three Class 8 truck plants that we use for North America for U.S. production. We have our plant in Mexico, which basically produces a lot for the Mexican market. That's its biggest space that we've done. We've made great investments in that because the market down there is good, and we're the market leader in Mexico. We have our Sainte-Thérèse factory, where we've made investments there.
That is a great factory with good people in it too. We feel like the footprint, we probably have the best footprint of anybody, I think, and feel very proud of our people and the great work they do in those factories. We cannot give them enough of a shout-out for how good they are, especially in dynamic times. I would say the capital investments we have made around capacity will be well served for us, right? We do not think about quarters of our investments. We think about years and providing great values to our customers and being able to build the trucks that they want from us, better, cleaner, more efficient trucks. That is what those investments have been centered around. They are going to be good for our shareholders, good for our customers, good for our dealers, and good for PACCAR.
Tim Thien (Analyst)
Okay. Thank you, Preston. Just on the medium-duty market, obviously, it is becoming a bigger one and more important one for PACCAR in recent years. The outlook for 90,000 to 100,000 units in 2025, was that altered in terms of how you are thinking about the market sizes here?
Ken Hastings (Director of Investor Relations)
We still think that's the market size for the medium-duty market.
Tim Thien (Analyst)
Okay. All right. Thank you.
Ken Hastings (Director of Investor Relations)
You bet.
Operator (participant)
Thank you. Our next question comes from Jerry Revich of Goldman Sachs. Jerry, your line is open. Please go ahead.
Jerry Revich (Analyst)
Yes. Hi. Good morning, everyone. Congratulations, Harrie, Brice, and Kevin. Can I ask, in terms of the impact of tariffs that we spoke to over the course of this call, over the past two quarters, your profit per truck as a result of the tariffs is down about $5,000 for 2Q versus 4Q, roughly. Based on where you're quoting trucks in March and April, is it fair to say you're going to make up a big chunk of that headwind based on the mid-single-digit number for pricing that you quoted, Preston? It sounds like you should be able to make really good progress in 3Q relative to that number. I'm wondering if you could put a finer point on that.
Ken Hastings (Director of Investor Relations)
Yeah, Jerry, I think I understand the math you're doing. I think it's really hard to see what Q3 is going to look like right now, simply because I think we really should wait and see what the tariff policy is and what the changes might be to it. It'll be a lot easier to talk about that once we have that clarity for ourselves. I think that let's just hang on that question for a little bit and see what the policies become.
Jerry Revich (Analyst)
Okay. Fair enough. In terms of your production flexibility, you could make any truck at any plant if you want to. Depending on how tariffs go, to what extent could it make sense to make medium-duty trucks in the U.S. plant? In other words, what kind of impact on productivity would it make if you just increase the variability SKU if you choose to move in that direction?
Ken Hastings (Director of Investor Relations)
Yeah. I mean, you said we have the flexibilities in our plans, which is great. We like the way we have our builds laid out right now and do not have any plans to change that.
Jerry Revich (Analyst)
Okay. Thank you.
Operator (participant)
Thank you. Our next question comes from Jeff Kauffman of Vertical Research Partners. Jeff, your line is open. Please go ahead.
Jeff Kauffman (Analyst)
Thank you very much. Like everybody else, Harrie, best of luck in retirement. Congratulations to Kevin and Brice. I feel like the tariffs and EPA questions have been beaten pretty hard here. I want to go back to.
Ken Hastings (Director of Investor Relations)
We need to do that.
Jeff Kauffman (Analyst)
I want to go back to your comment, which I thought was great, which is, look, freight's still moving and ton miles are still up. This is really kind of a tariff cost impact. At the end of the day, we still got to move freight. I guess my takeaway is, despite the uncertainty and despite people delaying decisions, I think, would your view be over a three to five-year period that there's unlikely to be any destruction in truck demand over the long term?
Ken Hastings (Director of Investor Relations)
Jeff, I think that's the right observation to make, right? America, over 70% of the product in America is moved by trucks. It is still going to be moved by trucks in the next three to five years. Trucks are wear-out items. The trucks we build become more and more efficient, which increases people's desire to have them. The number of trucks over that period of time is going to be constant. We expect our percentage to grow over time because we build the very best trucks, and that becomes increasingly important. We have the best dealers. We expect that that's going to increase over time. That bodes well for the future.
Jeff Kauffman (Analyst)
That's my one. Thanks.
Ken Hastings (Director of Investor Relations)
You bet.
Operator (participant)
Thank you. Our next question comes from Scott Group of Wolfe Research. Scott, your line is open. Please go ahead.
Scott Group (Analyst)
Hey, thanks. On the guidance for deliveries, do you have any just directional color by region you can give?
Ken Hastings (Director of Investor Relations)
Yeah. Yeah. I think we even shared that a little bit earlier, but maybe you didn't catch it, is we think that the U.S. market's relatively flat. We think Europe's relatively flat. We think most of the impact and change sequentially is through Mexico.
Scott Group (Analyst)
Okay. Helpful. I think you guys said cost in Q1 was up 1% sequentially and price was flat. Do you have just a—how should we think about that that's embedded within the guide for Q2 in terms of cost sequential and price sequential?
Ken Hastings (Director of Investor Relations)
Yeah. We would expect in Q2, we would see some price increase. Depending on how the tariff structures are, it could be cost higher than that.
Scott Group (Analyst)
Okay. I guess, I mean, ultimately, my big picture question is, is Q2 a timing issue, as was suggested earlier, of full cost impact of tariff, but a timing inability to price it? Or is there some—in a soft market, is there some lack of ability to actually get the full pricing benefit? Is it a timing issue, or is it a pricing power issue? I guess is ultimately my question.
Ken Hastings (Director of Investor Relations)
I think I would look at it like you did with the timing issue being the principal effect there for the quarter. I think that's the right way to think about it, is mostly a timing effect. I mean, obviously, it depends on the state of the market. I think that the biggest impact right now is this timing impact of pricing versus the cost timing.
Scott Group (Analyst)
Certainly. Okay. Thank you. Appreciate it.
Ken Hastings (Director of Investor Relations)
You bet.
Operator (participant)
Thank you. There are no further questions in the queue at this time. Are there any additional remarks from the company?
Preston Feight (CEO)
We'd like to thank everyone for joining the call. Thank you, operator.
Operator (participant)
Thank you. Ladies and gentlemen, this concludes today's PACCAR's earnings call. Thank you for participating. You may now disconnect your lines.